update: add QT_IM_MODULE=fcitx env

.install/cleanup.sh

@@ -13,6 +13,24 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
+# Check for running NetworkManager.service
+if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
+    echo ":: NetworkManager.service already running."
+else
+    sudo systemctl enable NetworkManager.service
+    sudo systemctl start NetworkManager.service
+    echo ":: NetworkManager.service activated successfully."    
+fi
+
+# Check for running bluetooth.service
+if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
+    echo ":: bluetooth.service already running."
+else
+    sudo systemctl enable bluetooth.service
+    sudo systemctl start bluetooth.service
+    echo ":: bluetooth.service activated successfully."    
+fi
+
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/fish.sh

@@ -1,6 +0,0 @@
-# ------------------------------------------------------
-# install fish
-# ------------------------------------------------------
-packagesPacman=("fish");
-packagesYay=();
-source .install/install-packages.sh

.install/hidpi.sh

@@ -1,17 +0,0 @@
-
-# ------------------------------------------------------
-# hidpi support
-# ------------------------------------------------------
-
-echo -e "${GREEN}"
-figlet "hidpi"
-echo -e "${NONE}"
-
-hidpiconfirm="Do you want 2x hidpi scale?"
-if gum confirm "$hidpiconfirm"; then
-    sed -i -E 's/size = [0-9]+(\.[0-9]+)?/size = 16/' ~/dotfiles-versions/$version/alacritty/alacritty.toml
-    sed -i -E 's/[0-9]+(\.[0-9]+)?/16/' ~/dotfiles-versions/$version/.settings/rofi-font.rasi
-    echo -e '\n\n# hidpi scale\nsource = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/conf/custom.conf
-    sed -i -E 's/1/2/' ~/dotfiles-versions/$version/hypr/conf/monitors/default.conf
-    echo ":: finished hidpi patch."
-fi

.install/hyprland-dotfiles.sh

@@ -5,9 +5,6 @@
 if [ -d ~/dotfiles-versions/$version/alacritty ]; then
     _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/kitty ]; then
-    _installSymLink kitty ~/.config/kitty ~/dotfiles/kitty/ ~/.config
-fi
 if [ -d ~/dotfiles-versions/$version/vim ]; then
     _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
 fi
@@ -40,17 +37,11 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/swappy ]; then
+if [ -d ~/dotfiles-versions/$version/eww ]; then
     _installSymLink eww ~/.config/eww ~/dotfiles/eww/ ~/.config
 fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
     _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
 fi
-if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
-    _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
-fi
-if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
-    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors
-fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -1,57 +1,65 @@
 packagesPacman=(
     "pacman-contrib"
     "vim"
-    "bat"
+    "bluez"
-    "fzf"
+    "bluez-utils"
-    "zsh"
-    "fastfetch"
-    "ranger"
-    "btop"
     "neovim"
     "wget"
     "unzip"
-    "alacritty"
+    "alacritty" 
-    "dunst"
+    "chromium" 
+    "dunst" 
     "starship"
-    "mpv"
+    "mpv" 
     "thunar"
-    "nautilus"
+    "nautilus" 
-    "noto-fonts"
+    "mousepad"
-    "otf-font-awesome"
+    "noto-fonts" 
-    "ttf-fira-sans"
+    "otf-font-awesome" 
-    "ttf-fira-code"
+    "ttf-fira-sans" 
-    "ttf-firacode-nerd"
+    "ttf-fira-code" 
-    "ttf-firacode-nerd"
+    "ttf-firacode-nerd" 
-    "figlet"
+    "figlet" 
-    "vlc"
+    "vlc" 
-    "eza"
+    "eza" 
-    "python-pip"
+    "python-pip" 
-    "python-psutil"
+    "python-psutil" 
-    "python-rich"
+    "python-rich" 
+    "python-click" 
     "python-pywal"
-    "pavucontrol"
+    "python-gobject"
-    "tumbler"
+    "pavucontrol" 
+    "tumbler" 
     "papirus-icon-theme"
+    "breeze-icons"
+    "polkit-gnome"
+    "brightnessctl"
     "gum"
     "man-pages"
+    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
     "xdg-desktop-portal-gtk"
+    "networkmanager"
+    "network-manager-applet"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
+    "gtk4"
+    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
+    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
+    "blueman"
 );
 
 packagesYay=(
-    "vimix-cursors"
+    "bibata-cursor-theme" 
-    "orchis-theme"
     "trizen"
-    "google-chrome"
+    "pacseek"
 );

.install/packages/hyprland-packages.sh

@@ -3,17 +3,15 @@ packagesPacman=(
     "hyprpaper"
     "hyprlock"
     "hypridle"
-    "xdg-desktop-portal-hyprland"
+    "xdg-desktop-portal-hyprland" 
-    "waybar"
+    "waybar" 
-    "grim"
+    "grim" 
     "slurp"
     "swappy"
     "cliphist"
-    "kitty"
 );
 
 packagesYay=(
-    "pyprland"
     "wlogout"
     "nwg-look"
     "eww"

.install/qtile-dotfiles.sh

@@ -35,7 +35,4 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
-    _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
-fi
 echo ":: Symbolic links created."

.install/restore.sh

@@ -14,14 +14,6 @@ _showRestoreOptions() {
         restorelist+="~/dotfiles/.bashrc "
         selectedlist+="~/dotfiles/.bashrc,"
     fi
-    if [ -f ~/dotfiles/.zshrc ]; then
-        restorelist+="~/dotfiles/.zshrc "
-        selectedlist+="~/dotfiles/.zshrc,"
-    fi
-    if [ -f ~/dotfiles/.p10k.zsh ]; then
-        restorelist+="~/dotfiles/.p10k.zsh "
-        selectedlist+="~/dotfiles/.p10k.zsh,"
-    fi
     if [ -d ~/dotfiles/.settings ]; then
         restorelist+="~/dotfiles/.settings "
         selectedlist+="~/dotfiles/.settings,"
@@ -32,7 +24,7 @@ _showRestoreOptions() {
             then
                 restorelist+="~/dotfiles/hypr/hypridle.conf "
                 selectedlist+="~/dotfiles/hypr/hypridle.conf,"
-            fi
+            fi        
         fi
         if [ -f ~/dotfiles/hypr/conf/custom.conf ]; then
             restorelist+="~/dotfiles/hypr/conf/custom.conf "
@@ -83,13 +75,13 @@ _showRestoreOptions() {
     fi
     restoreselect=$(gum choose --no-limit --height 20 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " --selected="$selectedlist" $restorelist)
     if [ ! -z "$restoreselect" ] ;then
-        echo "Selected to restore:"
+        echo "Selected to restore:" 
         echo "$restoreselect"
         echo ""
         confirmrestore=$(gum choose "Start restore" "Change restore" "Skip restore")
         if [ "$confirmrestore" == "Start restore" ] ;then
             _startRestore
-        elif [ "$confirmrestore" == "Change restore" ]; then
+        elif [ "$confirmrestore" == "Change restore" ]; then 
             _showRestoreOptions
         else
             echo ":: Restore skipped."
@@ -102,7 +94,7 @@ _showRestoreOptions() {
             echo ":: Installation canceled."
             exit
         fi
-        if [ "$confirmrestore" == "Change restore" ]; then
+        if [ "$confirmrestore" == "Change restore" ]; then 
             echo ""
             _showRestoreOptions
         else
@@ -143,11 +135,11 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/keyboard.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland keyboard.conf restored!"
             fi
-        fi
+        fi        
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/monitor.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/monitor.conf ]; then
                 cp ~/dotfiles/hypr/conf/monitor.conf ~/dotfiles-versions/$version/hypr/conf/
-                echo ":: Hyprland monitor.conf restored!"
+                echo ":: Hyprland monitor.conf restored!"                
             fi
         fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/keybinding.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
@@ -161,19 +153,19 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/environment.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland environment.conf restored!"
             fi
-        fi
+        fi        
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/layout.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/layout.conf ]; then
                 cp ~/dotfiles/hypr/conf/layout.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland layout.conf restored!"
             fi
-        fi
+        fi        
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/windowrule.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/windowrule.conf ]; then
                 cp ~/dotfiles/hypr/conf/windowrule.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland windowrule.conf restored!"
             fi
-        fi
+        fi        
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/animation.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/animation.conf ]; then
                 cp ~/dotfiles/hypr/conf/animation.conf ~/dotfiles-versions/$version/hypr/conf/

.install/templates/keyboard-default.conf

@@ -8,7 +8,7 @@ input {
     kb_model =
     kb_options =
     numlock_by_default = true
-    mouse_refocus=false
+    mouse_refocus = false
     
     # For United States
     # kb_layout = us
@@ -28,3 +28,7 @@ input {
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
+
+gestures {
+    workspace_swipe = true
+}

.install/templates/keyboard-laptop.conf

@@ -8,7 +8,7 @@ input {
     kb_model =
     kb_options =
     numlock_by_default = true
-    mouse_refocus=false
+    mouse_refocus = false
     
     # For United States
     # kb_layout = us
@@ -22,9 +22,14 @@ input {
         # natural_scroll = false
 
         # for laptop
-        natural_scroll = yes
+        natural_scroll = true
         middle_button_emulation = true
-        clickfinger_behavior = 1  
+        clickfinger_behavior = true
+        disable_while_typing = true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
+
+gestures {
+    workspace_swipe = true
+}

.install/wallpaper.sh

@@ -5,17 +5,16 @@ echo -e "${GREEN}"
 figlet "Wallpapers"
 echo -e "${NONE}"
 if [ ! -d ~/wallpaper ]; then
-    echo "Do you want to download the wallpapers from repository https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ?"
+    echo "Do you want to download the wallpapers from repository https://gitlab.com/stephan-raabe/wallpaper/ ?"
     echo "If not, the script will install 3 default wallpapers in ~/wallpaper/"
     echo ""
     if gum confirm "Do you want to download the repository?" ;then
-        # wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
+        wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
-        # unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
+        unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
-        # if [ ! -d ~/wallpaper/ ]; then
+        if [ ! -d ~/wallpaper/ ]; then
-        #     mkdir ~/wallpaper
+            mkdir ~/wallpaper
-        # fi
+        fi
-        # cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        cp ~/Downloads/wallpaper-main/* ~/wallpaper/
-        git clone https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ~/wallpaper
         echo "Wallpapers from the repository installed successfully."
     elif [ $? -eq 130 ]; then
         exit 130

.install/zsh.sh

@@ -1,19 +0,0 @@
-# ------------------------------------------------------
-# install zsh and zinit
-# ------------------------------------------------------
-packagesPacman=("zsh");
-
-echo "Please select the zsh plugin manager:"
-zsh_manager=$(gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "oh my zsh" "zinit")
-if [[ "${zsh_manager}" == *"oh my zsh"* ]]; then
-    source .install/install-packages.sh
-    RUNZSH=no CHSH=no sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
-	git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
-	git clone https://github.com/zdharma-continuum/fast-syntax-highlighting.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/fast-syntax-highlighting
-	_installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_ohmyzsh ~/.zshrc
-else
-    packagesYay=("zinit");
-	source .install/install-packages.sh
-    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_zinit ~/.zshrc
-fi
-_installSymLink p10k ~/.p10k.zsh ~/dotfiles/.p10k.zsh ~/

.install/zshfish.sh

@@ -1,25 +0,0 @@
-# ------------------------------------------------------
-# Select additional shell
-# ------------------------------------------------------
-echo -e "${GREEN}"
-figlet "Zsh Fish"
-echo -e "${NONE}"
-echo "Please select if you want to install zsh or fish."
-echo
-zshfish=$(gum choose --no-limit --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "zsh" "fish")
-
-if [ -z "${zshfish}" ] ;then
-    echo ":: No shell selected. Keep using bash."
-else
-    echo "Please select your default shell."
-	echo
-	shell=$(echo -e "bash\n$zshfish" | gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) ")
-    if [[ $zshfish == *"zsh"* ]]; then
-		echo ":: zsh selected"
-		source .install/zsh.sh
-	fi
-	if [[ $zshfish == *"fish"* ]]; then
-		echo ":: fish selected"
-		source .install/fish.sh
-	fi
-fi

.settings/browser.sh

@@ -1 +1 @@
-google-chrome-stable
+chromium

.settings/editor.sh

@@ -1 +1 @@
-~/dotfiles/.settings/terminal.sh -e vim
+mousepad

.settings/networkmanager.sh

@@ -0,0 +1 @@
+nm-connection-editor

.settings/rofi-border-radius.rasi

@@ -1,3 +0,0 @@
-* {
-    border-radius:  15px;
-}

.settings/rofi-border.rasi

@@ -1,3 +1,4 @@
 * {
     border-width:   2px;
+    border-radius:  15px;
 }

.settings/software.sh

@@ -0,0 +1 @@
+alacritty -e pacseek

.version/name

@@ -1 +1 @@
-2.9.1.1
+2.9.1.2

.version/version

@@ -1 +1 @@
-2911
+2912

.zshrc_ohmyzsh

@@ -1,80 +0,0 @@
-# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
-# Initialization code that may require console input (password prompts, [y/n]
-# confirmations, etc.) must go above this block; everything else may go below.
-if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
-  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
-fi
-
-# -----------------------------------------------------
-# Oh my zsh settings
-# -----------------------------------------------------
-
-# Path to your oh-my-zsh installation.
-export ZSH="$HOME/.oh-my-zsh"
-
-# ZSH_THEME="robbyrussell"
-ZSH_THEME="powerlevel10k/powerlevel10k"
-
-# Uncomment the following line to use hyphen-insensitive completion.
-# Case-sensitive completion must be off. _ and - will be interchangeable.
-# HYPHEN_INSENSITIVE="true"
-
-zstyle ':omz:update' mode auto
-
-# Uncomment the following line to display red dots whilst waiting for completion.
-# You can also set it to another string to have that shown instead of the default red dots.
-# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
-# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
-COMPLETION_WAITING_DOTS="true"
-
-# -----------------------------------------------------
-# Plugins
-# -----------------------------------------------------
-plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
-
-source $ZSH/oh-my-zsh.sh
-
-# -----------------------------------------------------
-# Variables
-# -----------------------------------------------------
-export PATH=$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
-# export MANPATH="/usr/local/man:$MANPATH"
-
-export LANG=en_US.UTF-8
-
-export EDITOR='vim'
-
-export MAKEFLAGS='-j$(nproc)'
-export CFLAGS='-march=native -O2 -pipe'
-
-# -----------------------------------------------------
-# Alias
-# -----------------------------------------------------
-alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
-alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
-alias ls="eza --icons=auto"
-alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
-alias bat="bat --paging=never"
-# fix ssh if in kitty
-[ "$TERM" = "xterm-kitty" ] && alias ssh="kitty +kitten ssh"
-
-# -----------------------------------------------------
-# evals
-# -----------------------------------------------------
-eval $(thefuck --alias)
-eval "$(fzf --zsh)"
-
-# -----------------------------------------------------
-# PYWAL
-# -----------------------------------------------------
-cat ~/.cache/wal/sequences
-
-# -----------------------------------------------------
-# Custom
-# -----------------------------------------------------
-[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh
-
-# -----------------------------------------------------
-# miscs
-# -----------------------------------------------------
-[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.zshrc_zinit

@@ -1,62 +0,0 @@
-# ---------------------------------------------------
-# Zinit and plugins
-# ---------------------------------------------------
-source /usr/share/zinit/zinit.zsh
-
-# Load powerlevel10k theme
-zinit ice depth"1" # git clone depth
-zinit light romkatv/powerlevel10k
-
-# Load plugins
-zinit light zsh-users/zsh-autosuggestions
-zinit light zdharma-continuum/fast-syntax-highlighting
-# oh-my-zsh plugins
-zi snippet OMZL::git.zsh
-zi snippet OMZP::git
-zi snippet OMZP::sudo
-zi snippet OMZP::colored-man-pages
-zi snippet OMZP::eza
-zi snippet OMZP::z
-# others
-zplugin ice as"program" pick"bin/git-dsf"
-zplugin light zdharma-continuum/zsh-diff-so-fancy
-
-# ----------------------------------------------------
-# Variables
-# ----------------------------------------------------
-export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
-export EDITOR=vim
-
-# ----------------------------------------------------
-# Alias
-# ----------------------------------------------------
-alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
-alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
-alias eza="eza --icons=auto"
-alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
-alias bat="bat --paging=never"
-
-# -----------------------------------------------------
-# evals
-# -----------------------------------------------------
-eval $(thefuck --alias)
-eval "$(fzf --zsh)"
-
-# -----------------------------------------------------
-# Miscs
-# -----------------------------------------------------
-# fix ssh if in kitty
-[ "$TERM" = "xterm-kitty" ] && alias ssh="kitty +kitten ssh"
-
-# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
-[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
-
-# -----------------------------------------------------
-# PYWAL
-# -----------------------------------------------------
-cat ~/.cache/wal/sequences
-
-# -----------------------------------------------------
-# Custom
-# -----------------------------------------------------
-[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh

CHANGELOG.md

@@ -1,3 +1,11 @@
+Version 2.9.1.2
+https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
+--------------------------------------------------------
+- Workspaces module in waybar updated to enable scroll to change the workspace https://gitlab.com/stephan-raabe/dotfiles/-/merge_requests/114
+- More functions deactivated in Game Mode (SUPER+ALT+G)
+- Keybindings rofi menu updated with keybinding description. Open with right mouse click on Apps waybar module
+- Fixed bug of ML4W Hyprland Settings App with Hyprland 0.41.0
+
 Version 2.9.1.1
 https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
 --------------------------------------------------------

README.md

@@ -1,4 +1,4 @@
-# ML4W Dotfiles 2.9.1.1
+# ML4W Dotfiles 2.9.1.2
 
 An advanced configuration of Hyprland for Arch Linux based distributions. This package includes an installation script to install and setup the required components.
 
@@ -55,6 +55,8 @@ THANK YOU very much for all your support, contributions and ideas:
 - Don Williams: https://github.com/dwilliam62
 - Teodor Orzechowski: https://gitlab.com/sq6gtt
 - Jamie Deppeler: https://gitlab.com/bknight2k
+- Yingjie Wang: https://gitlab.com/GaugeAndGravity
+- Daniel Gerber: https://gitlab.com/dan.john.gerber
 - https://gitlab.com/muee
 
 and many more...

Vimix-hyprcursors/manifest.hl

@@ -1,4 +0,0 @@
-name = Extracted Theme
-description = Automatically extracted with hyprcursor-util
-version = 0.1
-cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -1,5 +1,5 @@
 [font]
-size = 16.0
+size = 12.0
 
 [font.normal]
 family = "FiraCode Nerd Font"
@@ -11,6 +11,3 @@ opacity = 0.7
 [window.padding]
 x = 15
 y = 15
-
-[selection]
-save_to_clipboard = true

chrome-flags.conf

@@ -1 +0,0 @@
---ozone-platform=wayland --enable-wayland-ime

fastfetch/config.jsonc

@@ -1,165 +1,110 @@
-// Note that you must replace the image path to an existing image to display it.
+//  Thanks to Bina
-
 {
-    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+  "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-    // "logo": {
+  "logo": {
-    //     "type": "iterm",
+      "padding": {
-    //     "source": "/Users/carter/Desktop/apple1.png",
+      "top": 2
-    //     "width": 28,
+      }
-    //     "height": 12
+  },
-    // },
+  "display": {
-    "display": {
+        "separator": " ➜  "
-    //    "separator": "  "
+  },
-        "separator": " "
+  "modules": [
-    },
+      "break",
-    "modules": [
+      "break",
-        {
+      "break",
-            "type": "host",
+       {
-            "key": "╭─󰌢",
+          "type": "os",
-            "keyColor": "green"
+          "key": "OS   ",
-        },
+          "keyColor": "31",  // = color1
-        {
+      },
-            "type": "cpu",
+      {
-            "key": "├─󰻠",
+          "type": "kernel",
-            "keyColor": "green"
+          "key": " ├  ",
-        },
+          "keyColor": "31",
-        {
+      },
-            "type": "gpu",
+      {
-            "key": "├─󰍛",
+          "type": "packages",
-            "keyColor": "green"
+          "format": "{} (pacman)",
-        },
+          "key": " ├ 󰏖 ",
-        {
+          "keyColor": "31",  
-            "type": "disk",
+      },
-            "key": "├─",
+      {
-            "keyColor": "green"
+          "type": "shell",
-        },
+          "key": " └  ",
-        {
+          "keyColor": "31", 
-            "type": "memory",
+      },
-            "key": "├─󰑭",
+      "break",
-            "keyColor": "green"
+      {
-        },
+          "type": "wm",
-        {
+          "key": "WM   ",
-            "type": "swap",
+          "keyColor": "32", 
-            "key": "├─󰓡",
+      },
-            "keyColor": "green"
+      {
-        },
+          "type": "wmtheme",
-        {
+          "key": " ├ 󰉼 ",
-            "type": "display",
+          "keyColor": "32",
-            "key": "├─󰍹",
+      },
-            "keyColor": "green"
+      {
-        },
+          "type": "icons",
-        {
+          "key": " ├ 󰀻 ",
-            "type": "battery",
+          "keyColor": "32",
-            "key": "├─",
+      },
-            "keyColor": "green"
+      {
-        },
+          "type": "cursor",
-        {
+          "key": " ├  ",
-            "type": "poweradapter",
+          "keyColor": "32", 
-            "key": "├─",
+      },
-            "keyColor": "green"
+      {
-        },
+          "type": "terminal",
-        {
+          "key": " ├  ",
-            "type": "gamepad",
+          "keyColor": "32",
-            "key": "├─",
+      },
-            "keyColor": "green"
+      {
-        },
+          "type": "terminalfont",
-        {
+          "key": " └  ",
-            "type": "bluetooth",
+          "keyColor": "32", 
-            "key": "├─",
+      },
-            "keyColor": "green"
+      "break",
-        },
+      {
-        {
+          "type": "host",
-            "type": "sound",
+          "format": "{5} {1} Type {2}",
-            "key": "╰─",
+          "key": "PC   ",
-            "keyColor": "green"
+          "keyColor": "33",
-        },
+      },
-        "break",
+      {
-
+          "type": "cpu",
-        {
+          "format": "{1} ({3}) @ {7} GHz",
-            "type": "shell",
+          "key": " ├  ",
-            "key": "╭─",
+          "keyColor": "33",
-            "keyColor": "yellow"
+      },
-        },
+      {
-        {
+          "type": "gpu",
-            "type": "terminal",
+          "format": "{1} {2} @ {12} GHz",            
-            "key": "├─",
+          "key": " ├ 󰢮 ",
-            "keyColor": "yellow"
+          "keyColor": "33",
-        },
+      },
-        {
+      {
-            "type": "terminalfont",
+          "type": "memory",
-            "key": "├─",
+          "key": " ├  ",
-            "keyColor": "yellow"
+          "keyColor": "33",
-        },
+      },
-        {
+      {
-            "type": "lm",
+          "type": "swap",
-            "key": "├─󰧨",
+          "key": " ├ 󰓡 ",
-            "keyColor": "yellow"
+          "keyColor": "33",
-        },
+      },
-        {
+      {
-            "type": "de",
+          "type": "disk",
-            "key": "├─",
+          "key": " ├ 󰋊 ",
-            "keyColor": "yellow"
+          "keyColor": "33",
-        },
+      },
-        {
+      {
-            "type": "wm",
+          "type": "monitor",
-            "key": "├─",
+          "key": " └  ",
-            "keyColor": "yellow"
+          "keyColor": "33",
-        },
+      },
-        {
+      "break",
-            "type": "theme",
+      "break",
-            "key": "├─󰉼",
+  ]
-            "keyColor": "yellow"
+}
-        },
-        {
-            "type": "icons",
-            "key": "╰─󰀻",
-            "keyColor": "yellow"
-        },
-
-        "break",
-        {
-            "type": "title",
-            "key": "╭─",
-            "format": "{1}@{2}",
-            "keyColor": "blue"
-        },
-        {
-            "type": "os",
-            "key": "├─󰣇", // Just get your distro's logo off nerdfonts.com
-            "keyColor": "blue"
-        },
-        {
-            "type": "kernel",
-            "key": "├─",
-            "format": "{1} {2}",
-            "keyColor": "blue"
-        },
-        {
-            "type": "packages",
-            "key": "├─󰏖",
-            "keyColor": "blue"
-        },
-        {
-            "type": "uptime",
-            "key": "├─󰅐",
-            "keyColor": "blue"
-        },
-        {
-            "type": "media",
-            "key": "├─󰝚",
-            "keyColor": "blue"
-        },
-        {
-            "type": "localip",
-            "key": "╰─󰩟",
-            "compact": true,
-            "keyColor": "blue"
-        },
-        "break",
-        {
-            "type": "custom",
-            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻"
-        }
-    ]
-}
-

hypr/conf/animation.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/animations/animations-high.conf
+source = ~/dotfiles/hypr/conf/animations/animation-moving.conf

hypr/conf/autostart.conf

@@ -29,8 +29,8 @@ exec-once = ~/dotfiles/hypr/scripts/ml4w-welcome-autostart.sh
 # Start ewww daemon
 exec-once = ~/dotfiles/hypr/scripts/eww.sh
 
-exec-once = pypr
-
-
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
+
+# Load configuration from ML4W Hyprland Settings App
+exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1 +1 @@
-exec-once = hyprctl setcursor Vimix 24
+exec-once = hyprctl setcursor Bibata-Modern-Ice 24

hypr/conf/fcitx5.conf

@@ -3,3 +3,5 @@ exec-once = fcitx5 -d --replace
 exec-once = fcitx5-remote -r
 
 bind=$mainMod CTRL, E, exec, pkill fcitx5 -9;sleep 1;fcitx5 -d --replace; sleep 1;fcitx5-remote -r
+
+env=QT_IM_MODULE,fcitx

hypr/conf/hidpi.conf

@@ -1,6 +0,0 @@
-xwayland {
-  force_zero_scaling = true
-}
-
-env = GDK_SCALE,2
-env = QT_SCALE_FACTOR=2

hypr/conf/keybindings/custom.conf

@@ -1,7 +1,7 @@
-# -----------------------------------------------------
+# ----------------------------------------------------- 
 # Key bindings
 # name: "Default"
-# -----------------------------------------------------
+# ----------------------------------------------------- 
 
 # SUPER KEY
 $mainMod = SUPER
@@ -9,7 +9,7 @@ $mainMod = SUPER
 # Applications
 bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
 bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
-bind = $mainMod SHIFT, E, exec, emote
+bind = $mainMod, period, exec, emote
 
 # Windows
 bind = $mainMod, Q, killactive
@@ -35,18 +35,15 @@ bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
 bind = $mainMod CTRL, Q, exec, wlogout
 bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
 bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod, SPACE, exec, rofi -show drun -replace -i
+bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
 bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
 bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
-bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
 bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
+bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
 bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
 bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
-bind = $mainMod CTRL, P, exec, hyprpicker -a
-bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
-bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
 bind = $mainMod, 1, workspace, 1
@@ -95,6 +92,3 @@ bind = $mainMod, P, submap, passthru
 submap = passthru
 bind = SUPER, Escape, submap, reset
 submap = reset
-
-# Pyprland
-bind = $mainMod SHIFT, RETURN, exec, pypr toggle term

hypr/conf/keybindings/default.conf

@@ -7,89 +7,88 @@
 $mainMod = SUPER
 
 # Applications
-bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
+bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh # Open the terminal
-bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
+bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh # Open the browser
+bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh # Open the filemanager
 
 # Windows
-bind = $mainMod, Q, killactive
+bind = $mainMod, Q, killactive # Kill active window
-bind = $mainMod, F, fullscreen
+bind = $mainMod, F, fullscreen # Set active window to fullscreen
-bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
+bind = $mainMod, T, togglefloating # Toggle active windows into floating mode
-bind = $mainMod, T, togglefloating
+bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh # Toggle all windows into floating mode
-bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
+bind = $mainMod, J, togglesplit # Toggle split
-bind = $mainMod, J, togglesplit
+bind = $mainMod, left, movefocus, l # Move focus left
-bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r # Move focus right
-bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u # Move focus up
-bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d # Move focus down
-bind = $mainMod, down, movefocus, d
+bindm = $mainMod, mouse:272, movewindow # Move window with the mouse
-bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow # Resize window with the mouse
-bindm = $mainMod, mouse:273, resizewindow
+bind = $mainMod SHIFT, right, resizeactive, 100 0 # Increase window width with keyboard
-bind = $mainMod SHIFT, right, resizeactive, 100 0
+bind = $mainMod SHIFT, left, resizeactive, -100 0 # Reduce window width with keyboard
-bind = $mainMod SHIFT, left, resizeactive, -100 0
+bind = $mainMod SHIFT, down, resizeactive, 0 100 # Increase window height with keyboard
-bind = $mainMod SHIFT, up, resizeactive, 0 -100
+bind = $mainMod SHIFT, up, resizeactive, 0 -100 # Reduce window height with keyboard
-bind = $mainMod SHIFT, down, resizeactive, 0 100
+bind = $mainMod, G, togglegroup # Toggle window group
-bind = $mainMod, G, togglegroup
 
 # Actions
-bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh
+bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh # Toggle animations
-bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
+bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh # Take a screenshot
-bind = $mainMod CTRL, Q, exec, wlogout
+bind = $mainMod CTRL, Q, exec, wlogout # Start wlogout
-bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh # Change the wallpaper
-bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select # Open wallpaper selector
-bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
+bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i # Open application launcher
-bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
+bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh # Show keybindings
-bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh # Reload waybar
-bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh # Toggle waybar
-bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
+bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh # Reload hyprland config
-bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh # Open clipboard manager
-bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh # Open waybar theme switcher
-bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
+bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
-bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh # Toggle screenshader
-bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh # Toggle game mode
-bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
-bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
-bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 1, workspace, 1 # Open workspace 1
-bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 2, workspace, 2 # Open workspace 2
-bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 3, workspace, 3 # Open workspace 3
-bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 4, workspace, 4 # Open workspace 4
-bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 5, workspace, 5 # Open workspace 5
-bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 6, workspace, 6 # Open workspace 6
-bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 7, workspace, 7 # Open workspace 7
-bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 8, workspace, 8 # Open workspace 8
-bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 9, workspace, 9 # Open workspace 9
-bind = $mainMod, 0, workspace, 10
+bind = $mainMod, 0, workspace, 10 # Open workspace 10
-bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 1, movetoworkspace, 1 # Move active window to workspace 1
-bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 2, movetoworkspace, 2 # Move active window to workspace 2
-bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 3, movetoworkspace, 3 # Move active window to workspace 3
-bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 4, movetoworkspace, 4 # Move active window to workspace 4
-bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 5, movetoworkspace, 5 # Move active window to workspace 5
-bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 6, movetoworkspace, 6 # Move active window to workspace 6
-bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 7, movetoworkspace, 7 # Move active window to workspace 7
-bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 8, movetoworkspace, 8 # Move active window to workspace 8
-bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 9, movetoworkspace, 9 # Move active window to workspace 9
-bind = $mainMod SHIFT, 0, movetoworkspace, 10
+bind = $mainMod SHIFT, 0, movetoworkspace, 10 # Move active window to workspace 10
-bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_down, workspace, e+1 # Open next workspace
-bind = $mainMod, mouse_up, workspace, e-1
+bind = $mainMod, mouse_up, workspace, e-1 # Open previous workspace
-bind = $mainMod CTRL, down, workspace, empty
+bind = $mainMod CTRL, down, workspace, empty # Open the next empty workspace
-
-# Fn keys
-bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10%
-bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%-
-bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5%
-bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5%
-bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
-bind = , XF86AudioPlay, exec, playerctl play-pause
-bind = , XF86AudioPause, exec, playerctl pause
-bind = , XF86AudioNext, exec, playerctl next
-bind = , XF86AudioPrev, exec, playerctl previous
-bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle
-bind = , XF86Calculator, exec, qalculate-gtk
-bind = , XF86Lock, exec, hyprlock
-bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/hypr/settings/settings.sh
 
 # Passthrough SUPER KEY to Virtual Machine
-bind = $mainMod, P, submap, passthru
+bind = $mainMod, P, submap, passthru # Passthrough SUPER key to virtual machine
 submap = passthru
-bind = SUPER, Escape, submap, reset
+bind = SUPER, Escape, submap, reset # Get SUPER key back from virtual machine
 submap = reset
+
+# Fn keys
+bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10% # Increase brightness by 10%
+bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%- # Reduce brightness by 10%
+bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5% # Increase volume by 5%
+bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5% # Reduce volume by 5%
+bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle # Toggle mute
+bind = , XF86AudioPlay, exec, playerctl play-pause # Audio play pause
+bind = , XF86AudioPause, exec, playerctl pause # Audio pause
+bind = , XF86AudioNext, exec, playerctl next # Audio next
+bind = , XF86AudioPrev, exec, playerctl previous # Audio previous
+bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle # Toggle microphone
+bind = , XF86Calculator, exec, qalculate-gtk # Open calculator
+bind = , XF86Lock, exec, hyprlock # Open screenlock
+bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
+

hypr/conf/keyboard.conf

@@ -3,17 +3,15 @@
 # https://wiki.hyprland.org/Configuring/Variables/#input
 # -----------------------------------------------------
 input {
-    kb_layout = us
+    kb_layout = de
-    kb_variant =
+    kb_variant = 
     kb_model =
     kb_options =
     numlock_by_default = true
     follow_mouse = 1
     mouse_refocus=false
     touchpad {
-        natural_scroll = true
+        natural_scroll = false
-        disable_while_typing=true
-        tap-to-click=true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }

hypr/conf/layouts/laptop.conf

@@ -12,12 +12,5 @@ master {
 }
 
 gestures {
-  workspace_swipe=true
+    workspace_swipe = true
-  workspace_swipe_fingers=3
-  workspace_swipe_distance=400
-  workspace_swipe_invert=true
-  workspace_swipe_min_speed_to_force=30
-  workspace_swipe_cancel_ratio=0.5
-  workspace_swipe_create_new=true
-  workspace_swipe_forever=true
 }

hypr/conf/misc.conf

@@ -5,6 +5,4 @@
 misc {
     disable_hyprland_logo = true
     disable_splash_rendering = true
-    enable_swallow = true
-    swallow_regex = ^(Alacritty)$
 }

hypr/conf/ml4w.conf

@@ -22,9 +22,9 @@ windowrulev2 = float,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = size 400 500,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = move 10% 20%,class:(ml4w-dotfiles-settings.py)
 
-windowrulev2 = float,class:(com.ml4w.hyprlandsettings)
+windowrulev2 = float,class:(com.ml4w.hyprland.settings)
-windowrulev2 = size 700 600,class:(com.ml4w.hyprlandsettings)
+windowrulev2 = size 700 600,class:(com.ml4w.hyprland.settings)
-windowrulev2 = center,class:(com.ml4w.hyprlandsettings)
+windowrulev2 = center,class:(com.ml4w.hyprland.settings)
 
 windowrulev2 = float,class:(ml4w-hyprland-settings.py)
 windowrulev2 = size 700 600,class:(ml4w-hyprland-settings.py)
@@ -37,4 +37,3 @@ windowrulev2 = center,class:(dotfiles-floating)
 env = APPIMAGELAUNCHER_DISABLE,1
 env = XCURSOR_SIZE,24
 env = XDG_CURRENT_DESKTOP,Hyprland
-

hypr/conf/monitors/4k.conf

@@ -1,6 +0,0 @@
-# ----------------------------------------------------- 
-# Monitor Setup
-# name: "Default"
-# ----------------------------------------------------- 
-
-monitor=,preferred,auto,2

hypr/conf/monitors/dual.conf

@@ -4,7 +4,4 @@
 # ----------------------------------------------------- 
 
 monitor=DP-1,preferred,0x0,2
-monitor=HDMI-A-1,3840x2160,1920x-275,2,transform,1
+monitor=HDMI-A-1,3840x2160,1920x-180,2,transform,1
-
-workspace=1,monitor:DP-1
-exec-once=hyprctl dispatch workspace 1

hypr/conf/windowrules/custom.conf

@@ -16,4 +16,3 @@ layerrule = blur, logout_dialog
 
 windowrule = float,title=^(Mathematica)$
 windowrule = opacity 0.75, ^(Code)$
-windowrule = float,^(QQ)$

hypr/pyprland.toml

@@ -1,12 +0,0 @@
-[pyprland]
-
-plugins = [
-  "scratchpads",
-  "magnify",
-]
-
-[scratchpads.term]
-animation = "fromTop"
-command = "kitty --class kitty-dropterm"
-class = "kitty-dropterm"
-size = "75% 60%"

hypr/scripts/gamemode.sh

@@ -7,13 +7,18 @@
 #
 
 if [ -f ~/.cache/gamemode ] ;then
-    hyprctl keyword animations:enabled true
+    hyprctl reload
-    hyprctl keyword decoration:blur:enabled true
     rm ~/.cache/gamemode
     notify-send "Gamemode deactivated" "Animations and blur enabled"
 else
-    hyprctl keyword animations:enabled false
+    hyprctl --batch "\
-    hyprctl keyword decoration:blur:enabled false
+        keyword animations:enabled 0;\
-    touch ~/.cache/gamemode
+        keyword decoration:drop_shadow 0;\
+        keyword decoration:blur:enabled 0;\
+        keyword general:gaps_in 0;\
+        keyword general:gaps_out 0;\
+        keyword general:border_size 1;\
+        keyword decoration:rounding 0"
+	touch ~/.cache/gamemode
     notify-send "Gamemode activated" "Animations and blur disabled"
 fi

hypr/scripts/keybindings.sh

@@ -21,13 +21,29 @@ config_file=${config_file/source=~/}
 config_file="/home/$USER$config_file"
 echo "Reading from: $config_file"
 
-# ----------------------------------------------------- 
+keybinds=""
-# Parse keybindings
+
-# ----------------------------------------------------- 
+# Detect Start String
-keybinds=$(grep -oP '(?<=bind = ).*' $config_file)
+while read -r line
-keybinds=$(echo "$keybinds" | sed 's/$mainMod/SUPER/g'| sed 's/,\([^,]*\)$/ = \1/' | sed 's/, exec//g' | sed 's/^,//g')
+do
-# ----------------------------------------------------- 
+    if [[ "$line" == "bind"* ]]; then
-# Show keybindings in rofi
+
-# ----------------------------------------------------- 
+        line="$(echo "$line" | sed 's/$mainMod/SUPER/g')"
+        line="$(echo "$line" | sed 's/bind = //g')"
+        line="$(echo "$line" | sed 's/bindm = //g')"
+
+        IFS='#' 
+        read -a strarr <<<"$line" 
+        kb_str=${strarr[0]}
+        cm_str=${strarr[1]}
+
+        IFS=',' 
+        read -a kbarr <<<"$kb_str" 
+
+        item="${kbarr[0]}  + ${kbarr[1]}"$'\r'"${cm_str:1}"
+        keybinds=$keybinds$item$'\n'
+    fi 
+done < "$config_file"
+
 sleep 0.2
-rofi -dmenu -i -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"
+rofi -dmenu -i -markup -eh 2 -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"

hypr/scripts/screenshot.sh

@@ -42,4 +42,4 @@ case $choice in
         notify-send "Screenshot created and copied to clipboard" "Mode: Fullscreen"
         swappy -f "$DIR$NAME"
     ;;
-esac
+esac

install.sh

@@ -62,7 +62,6 @@ if [[ $profile == *"Qtile"* ]]; then
     source .install/install-packages.sh
 fi
 source .install/wallpaper.sh
-source .install/hidpi.sh
 source .install/displaymanager.sh
 source .install/issue.sh
 source .install/restore.sh
@@ -78,7 +77,6 @@ fi
 if [[ $profile == *"Qtile"* ]]; then
     source .install/qtile-dotfiles.sh
 fi
-source .install/zshfish.sh
 source .install/settings.sh
 source .install/apps.sh
 source .install/gtk.sh

kitty/kitty.conf

@@ -1,14 +0,0 @@
-font_family     Fira Code Nerd Font
-font_size 	    14.0
-bold_font       auto
-italic_font      auto
-bold_italic_font auto
-
-background_opacity 0.7
-
-confirm_os_window_close 0
-
-enable_audio_bell no
-
-selection_foreground #000000
-selection_background #F5FBFF

nvim/init.vim

@@ -31,3 +31,13 @@ set ttyfast                 " Speed up scrolling in Vim
 " set spell                 " enable spell check (may need to download language package)
 " set noswapfile            " disable creating swap file
 " set backupdir=~/.cache/vim " Directory to store backup files.
+
+hi NonText ctermbg=none guibg=NONE
+hi Normal guibg=NONE ctermbg=NONE
+hi NormalNC guibg=NONE ctermbg=NONE
+hi SignColumn ctermbg=NONE ctermfg=NONE guibg=NONE
+
+hi Pmenu ctermbg=NONE ctermfg=NONE guibg=NONE
+hi FloatBorder ctermbg=NONE ctermfg=NONE guibg=NONE
+hi NormalFloat ctermbg=NONE ctermfg=NONE guibg=NONE
+hi TabLine ctermbg=None ctermfg=None guibg=None

rofi/config-cliphist.rasi

@@ -38,7 +38,6 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
-@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {