update: windowrules for code and wolfram

Reviewed-on: https://gitea.phywyj.dynv6.net/wyj/Hyprland-dotfiles/pulls/4

.install/cleanup.sh

@@ -13,24 +13,6 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
-# Check for running NetworkManager.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
-    echo ":: NetworkManager.service already running."
-else
-    sudo systemctl enable NetworkManager.service
-    sudo systemctl start NetworkManager.service
-    echo ":: NetworkManager.service activated successfully."    
-fi
-
-# Check for running bluetooth.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
-    echo ":: bluetooth.service already running."
-else
-    sudo systemctl enable bluetooth.service
-    sudo systemctl start bluetooth.service
-    echo ":: bluetooth.service activated successfully."    
-fi
-
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/fish.sh

@@ -0,0 +1,6 @@
+# ------------------------------------------------------
+# install fish
+# ------------------------------------------------------
+packagesPacman=("fish");
+packagesYay=();
+source .install/install-packages.sh

.install/hidpi.sh

@@ -11,7 +11,11 @@ hidpiconfirm="Do you want 2x hidpi scale?"
 if gum confirm "$hidpiconfirm"; then
     sed -i -E 's/size = [0-9]+(\.[0-9]+)?/size = 16/' ~/dotfiles-versions/$version/alacritty/alacritty.toml
     sed -i -E 's/[0-9]+(\.[0-9]+)?/16/' ~/dotfiles-versions/$version/.settings/rofi-font.rasi
-    echo -e '\n\n# hidpi scale\nsource = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/conf/custom.conf
+    echo -e '\n# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# HiDPI Scaling' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e 'source = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
     sed -i -E 's/1/2/' ~/dotfiles-versions/$version/hypr/conf/monitors/default.conf
+    #sed -i -E 's/24/32/' ~/dotfiles-versions/$version/hypr/conf/cursor.conf
     echo ":: finished hidpi patch."
 fi

.install/hyprland-dotfiles.sh

@@ -40,7 +40,7 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/swappy ]; then
+if [ -d ~/dotfiles-versions/$version/eww ]; then
     _installSymLink eww ~/.config/eww ~/dotfiles/eww/ ~/.config
 fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
@@ -49,5 +49,12 @@ fi
 if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
     _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
+    if [ ! -d ~/.local/share/icons ]; then mkdir -pv ~/.local/share/icons; fi
+    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors ~/.local/share/icons/
+fi
+if [ -d ~/dotfiles-versions/$version/ranger ]; then
+    _installSymLink ranger ~/.config/ranger ~/dotfiles/ranger/ ~/.config
+fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -7,19 +7,15 @@ packagesPacman=(
     "fastfetch"
     "ranger"
     "btop"
-    "bluez"
-    "bluez-utils"
     "neovim"
     "wget"
     "unzip"
     "alacritty"
-    "chromium" 
     "dunst"
     "starship"
     "mpv"
     "thunar"
     "nautilus"
-    "mousepad"
     "noto-fonts"
     "otf-font-awesome"
     "ttf-fira-sans"
@@ -32,41 +28,30 @@ packagesPacman=(
     "python-pip"
     "python-psutil"
     "python-rich"
-    "python-click" 
     "python-pywal"
-    "python-gobject"
     "pavucontrol"
     "tumbler"
     "papirus-icon-theme"
-    "breeze-icons"
-    "polkit-gnome"
-    "brightnessctl"
     "gum"
     "man-pages"
-    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
-    "xdg-desktop-portal-gtk"
-    "networkmanager"
-    "network-manager-applet"
+#    "xdg-desktop-portal-gtk"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
-    "gtk4"
-    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
-    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
-    "blueman"
 );
 
 packagesYay=(
     "vimix-cursors"
+    "orchis-theme"
     "trizen"
-    "pacseek"
+    "google-chrome"
 );

.install/packages/hyprland-packages.sh

@@ -3,14 +3,14 @@ packagesPacman=(
     "hyprpaper"
     "hyprlock"
     "hypridle"
-    "xdg-desktop-portal-hyprland" 
+    #    "xdg-desktop-portal-hyprland"
     "waybar"
     "grim"
     "slurp"
     "swappy"
     "cliphist"
     "kitty"
-);
+)
 
 packagesYay=(
     "pyprland"
@@ -18,4 +18,4 @@ packagesYay=(
     "nwg-look"
     "eww"
     "hyprshade"
-);
+)

.install/restore.sh

@@ -14,6 +14,14 @@ _showRestoreOptions() {
         restorelist+="~/dotfiles/.bashrc "
         selectedlist+="~/dotfiles/.bashrc,"
     fi
+    if [ -f ~/dotfiles/.zshrc ]; then
+        restorelist+="~/dotfiles/.zshrc "
+        selectedlist+="~/dotfiles/.zshrc,"
+    fi
+    if [ -f ~/dotfiles/.p10k.zsh ]; then
+        restorelist+="~/dotfiles/.p10k.zsh "
+        selectedlist+="~/dotfiles/.p10k.zsh,"
+    fi
     if [ -d ~/dotfiles/.settings ]; then
         restorelist+="~/dotfiles/.settings "
         selectedlist+="~/dotfiles/.settings,"

.install/templates/keyboard-default.conf

@@ -28,3 +28,7 @@ input {
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
+
+gestures {
+    workspace_swipe = true
+}

.install/templates/keyboard-laptop.conf

@@ -22,9 +22,14 @@ input {
         # natural_scroll = false
 
         # for laptop
-        natural_scroll = yes
+        natural_scroll = true
         middle_button_emulation = true
-        clickfinger_behavior = 1  
+        clickfinger_behavior = true
+        disable_while_typing = true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
+
+gestures {
+    workspace_swipe = true
+}

.install/zsh.sh

@@ -0,0 +1,22 @@
+# ------------------------------------------------------
+# install zsh and zinit
+# ------------------------------------------------------
+packagesPacman=("zsh");
+
+echo "Please select the zsh plugin manager:"
+zsh_manager=$(gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "oh my zsh" "zinit")
+if [[ "${zsh_manager}" == *"oh my zsh"* ]]; then
+    source .install/install-packages.sh
+    if [ ! -d ~/.oh-my-zsh ]; then
+        RUNZSH=no CHSH=no sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
+    fi
+    git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
+    git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
+    git clone https://github.com/zdharma-continuum/fast-syntax-highlighting.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/fast-syntax-highlighting
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_ohmyzsh ~/.zshrc
+else
+    packagesYay=("zinit");
+    source .install/install-packages.sh
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_zinit ~/.zshrc
+fi
+_installSymLink p10k ~/.p10k.zsh ~/dotfiles/.p10k.zsh ~/

.install/zshfish.sh

@@ -0,0 +1,25 @@
+# ------------------------------------------------------
+# Select additional shell
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "Zsh Fish"
+echo -e "${NONE}"
+echo "Please select if you want to install zsh or fish."
+echo
+zshfish=$(gum choose --no-limit --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "zsh" "fish")
+
+if [ -z "${zshfish}" ] ;then
+    echo ":: No shell selected. Keep using bash."
+else
+    echo "Please select your default shell."
+	echo
+	shell=$(echo -e "bash\n$zshfish" | gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) ")
+    if [[ $zshfish == *"zsh"* ]]; then
+		echo ":: zsh selected"
+		source .install/zsh.sh
+	fi
+	if [[ $zshfish == *"fish"* ]]; then
+		echo ":: fish selected"
+		source .install/fish.sh
+	fi
+fi

.settings/browser.sh

@@ -1 +1 @@
-chromium
+google-chrome-stable

.settings/editor.sh

@@ -1 +1 @@
-mousepad
+~/dotfiles/.settings/terminal.sh -e vim

.settings/networkmanager.sh

@@ -1 +0,0 @@
-nm-connection-editor

.settings/software.sh

@@ -1 +0,0 @@
-alacritty -e pacseek

.settings/terminal.sh

@@ -1 +1 @@
-alacritty
+kitty

.version/name

@@ -1 +1 @@
-2.9.1.1
+2.9.1.2

.version/version

@@ -1 +1 @@
-2911
+2912

.zshrc

@@ -1,128 +0,0 @@
-# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
-# Initialization code that may require console input (password prompts, [y/n]
-# confirmations, etc.) must go above this block; everything else may go below.
-if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
-  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
-fi
-
-# If you come from bash you might have to change your $PATH.
-export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
-
-# Path to your oh-my-zsh installation.
-export ZSH="$HOME/.oh-my-zsh"
-
-# Set name of the theme to load --- if set to "random", it will
-# load a random theme each time oh-my-zsh is loaded, in which case,
-# to know which specific one was loaded, run: echo $RANDOM_THEME
-# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
-# ZSH_THEME="robbyrussell"
-ZSH_THEME="powerlevel10k/powerlevel10k"
-
-# Set list of themes to pick from when loading at random
-# Setting this variable when ZSH_THEME=random will cause zsh to load
-# a theme from this variable instead of looking in $ZSH/themes/
-# If set to an empty array, this variable will have no effect.
-# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
-
-# Uncomment the following line to use case-sensitive completion.
-# CASE_SENSITIVE="true"
-
-# Uncomment the following line to use hyphen-insensitive completion.
-# Case-sensitive completion must be off. _ and - will be interchangeable.
-# HYPHEN_INSENSITIVE="true"
-
-# Uncomment one of the following lines to change the auto-update behavior
-# zstyle ':omz:update' mode disabled  # disable automatic updates
-# zstyle ':omz:update' mode auto      # update automatically without asking
-# zstyle ':omz:update' mode reminder  # just remind me to update when it's time
-
-# Uncomment the following line to change how often to auto-update (in days).
-# zstyle ':omz:update' frequency 13
-
-# Uncomment the following line if pasting URLs and other text is messed up.
-# DISABLE_MAGIC_FUNCTIONS="true"
-
-# Uncomment the following line to disable colors in ls.
-# DISABLE_LS_COLORS="true"
-
-# Uncomment the following line to disable auto-setting terminal title.
-# DISABLE_AUTO_TITLE="true"
-
-# Uncomment the following line to enable command auto-correction.
-# ENABLE_CORRECTION="true"
-
-# Uncomment the following line to display red dots whilst waiting for completion.
-# You can also set it to another string to have that shown instead of the default red dots.
-# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
-# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
-# COMPLETION_WAITING_DOTS="true"
-
-# Uncomment the following line if you want to disable marking untracked files
-# under VCS as dirty. This makes repository status check for large repositories
-# much, much faster.
-# DISABLE_UNTRACKED_FILES_DIRTY="true"
-
-# Uncomment the following line if you want to change the command execution time
-# stamp shown in the history command output.
-# You can set one of the optional three formats:
-# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
-# or set a custom format using the strftime function format specifications,
-# see 'man strftime' for details.
-# HIST_STAMPS="mm/dd/yyyy"
-
-# Would you like to use another custom folder than $ZSH/custom?
-# ZSH_CUSTOM=/path/to/new-custom-folder
-
-# Which plugins would you like to load?
-# Standard plugins can be found in $ZSH/plugins/
-# Custom plugins may be added to $ZSH_CUSTOM/plugins/
-# Example format: plugins=(rails git textmate ruby lighthouse)
-# Add wisely, as too many plugins slow down shell startup.
-plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
-
-source $ZSH/oh-my-zsh.sh
-
-# User configuration
-
-# export MANPATH="/usr/local/man:$MANPATH"
-
-# You may need to manually set your language environment
-# export LANG=en_US.UTF-8
-
-# Preferred editor for local and remote sessions
-# if [[ -n $SSH_CONNECTION ]]; then
-#   export EDITOR='vim'
-# else
-#   export EDITOR='mvim'
-# fi
-
-# Compilation flags
-# export ARCHFLAGS="-arch x86_64"
-
-# Set personal aliases, overriding those provided by oh-my-zsh libs,
-# plugins, and themes. Aliases can be placed here, though oh-my-zsh
-# users are encouraged to define aliases within the ZSH_CUSTOM folder.
-# For a full list of active aliases, run `alias`.
-#
-# Example aliases
-# alias zshconfig="mate ~/.zshrc"
-# alias ohmyzsh="mate ~/.oh-my-zsh"
-
-alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
-alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
-alias ls="eza --icons=auto"
-alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
-alias bat="bat --paging=never"
-
-# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
-[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
-
-eval $(thefuck --alias)
-eval "$(fzf --zsh)"
-
-# -----------------------------------------------------
-# PYWAL
-# -----------------------------------------------------
-cat ~/.cache/wal/sequences
-
-export EDITOR=nvim

.zshrc_ohmyzsh

@@ -0,0 +1,88 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# -----------------------------------------------------
+# Oh my zsh settings
+# -----------------------------------------------------
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# ZSH_THEME="robbyrussell"
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+zstyle ':omz:update' mode auto
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+COMPLETION_WAITING_DOTS="true"
+
+# -----------------------------------------------------
+# Plugins
+# -----------------------------------------------------
+plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# -----------------------------------------------------
+# Variables
+# -----------------------------------------------------
+export PATH=$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+# export MANPATH="/usr/local/man:$MANPATH"
+
+export LANG=en_US.UTF-8
+
+export EDITOR='nvim'
+
+export MAKEFLAGS='-j$(nproc)'
+export CFLAGS='-march=native -O2 -pipe'
+
+# -----------------------------------------------------
+# Alias
+# -----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias ls="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+alias code="code --ozone-platform=wayland --enable-wayland-ime"
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# -----------------------------------------------------
+# Completion
+# -----------------------------------------------------
+[[ -f /home/wyj/.dart-cli-completion/zsh-config.zsh ]] && . /home/wyj/.dart-cli-completion/zsh-config.zsh || true
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh
+
+# -----------------------------------------------------
+# miscs
+# -----------------------------------------------------
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.zshrc_zinit

@@ -0,0 +1,64 @@
+# ---------------------------------------------------
+# Zinit and plugins
+# ---------------------------------------------------
+source /usr/share/zinit/zinit.zsh
+
+# Load powerlevel10k theme
+zinit ice depth"1" # git clone depth
+zinit light romkatv/powerlevel10k
+
+# Load plugins
+zinit light zsh-users/zsh-autosuggestions
+zinit light zdharma-continuum/fast-syntax-highlighting
+# oh-my-zsh plugins
+zi snippet OMZL::git.zsh
+zi snippet OMZP::git
+zi snippet OMZP::sudo
+zi snippet OMZP::colored-man-pages
+zi snippet OMZP::eza
+zi snippet OMZP::z
+# others
+zplugin ice as"program" pick"bin/git-dsf"
+zplugin light zdharma-continuum/zsh-diff-so-fancy
+
+# ----------------------------------------------------
+# Variables
+# ----------------------------------------------------
+export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+export EDITOR=vim
+
+# ----------------------------------------------------
+# Alias
+# ----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias eza="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# Miscs
+# -----------------------------------------------------
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh

CHANGELOG.md

@@ -1,3 +1,11 @@
+Version 2.9.1.2
+https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
+--------------------------------------------------------
+- Workspaces module in waybar updated to enable scroll to change the workspace https://gitlab.com/stephan-raabe/dotfiles/-/merge_requests/114
+- More functions deactivated in Game Mode (SUPER+ALT+G)
+- Keybindings rofi menu updated with keybinding description. Open with right mouse click on Apps waybar module
+- Fixed bug of ML4W Hyprland Settings App with Hyprland 0.41.0
+
 Version 2.9.1.1
 https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
 --------------------------------------------------------

README.md

@@ -1,4 +1,4 @@
-# ML4W Dotfiles 2.9.1.1
+# ML4W Dotfiles 2.9.1.2
 
 An advanced configuration of Hyprland for Arch Linux based distributions. This package includes an installation script to install and setup the required components.
 
@@ -55,6 +55,8 @@ THANK YOU very much for all your support, contributions and ideas:
 - Don Williams: https://github.com/dwilliam62
 - Teodor Orzechowski: https://gitlab.com/sq6gtt
 - Jamie Deppeler: https://gitlab.com/bknight2k
+- Yingjie Wang: https://gitlab.com/GaugeAndGravity
+- Daniel Gerber: https://gitlab.com/dan.john.gerber
 - https://gitlab.com/muee
 
 and many more...

Vimix-hyprcursors/manifest.hl

@@ -0,0 +1,4 @@
+name = Extracted Theme
+description = Automatically extracted with hyprcursor-util
+version = 0.1
+cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -9,8 +9,8 @@ style = "Regular"
 opacity = 0.7
 
 [window.padding]
-x = 15
-y = 15
+x = 0
+y = 0
 
 [selection]
 save_to_clipboard = true

fastfetch/config.jsonc

@@ -1,5 +1,4 @@
 // Note that you must replace the image path to an existing image to display it.
-
 {
     "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
     // "logo": {
@@ -74,7 +73,6 @@
             "keyColor": "green"
         },
         "break",
-
         {
             "type": "shell",
             "key": "╭─",
@@ -85,6 +83,11 @@
             "key": "├─",
             "keyColor": "yellow"
         },
+        {
+            "type": "editor",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
         {
             "type": "terminalfont",
             "key": "├─",
@@ -115,7 +118,6 @@
             "key": "╰─󰀻",
             "keyColor": "yellow"
         },
-
         "break",
         {
             "type": "title",
@@ -149,6 +151,21 @@
             "key": "├─󰝚",
             "keyColor": "blue"
         },
+        {
+            "type": "cpuusage",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "loadavg",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "processes",
+            "key": "├─",
+            "keyColor": "blue"
+        },
         {
             "type": "localip",
             "key": "╰─󰩟",
@@ -162,4 +179,3 @@
         }
     ]
 }
-

hypr/conf/autostart.conf

@@ -34,6 +34,3 @@ exec-once = pypr
 
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
-
-# Load configuration from ML4W Hyprland Settings App
-exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1 +1,2 @@
-exec-once = hyprctl setcursor Vimix 24
+exec-once = hyprctl setcursor Vimix-hyprcursors 32
+env = HYPRCURSOR_THEME,Vimix-hyprcursors

hypr/conf/decorations/custom.conf

@@ -18,8 +18,14 @@ decoration {
     inactive_opacity = 0.8
     fullscreen_opacity = 1.0
 
-    drop_shadow = true
-    shadow_range = 30
-    shadow_render_power = 3
-    col.shadow = 0x66000000
+    shadow {
+        enabled = true
+        range = 30
+        render_power = 3
+        color = 0x66000000
+    }
+    #drop_shadow = true
+    #shadow_range = 30
+    #shadow_render_power = 3
+    #col.shadow = 0x66000000
 }

hypr/conf/decorations/low.conf

@@ -0,0 +1,31 @@
+# ----------------------------------------------------- 
+# General window decoration
+# name: "Low"
+# ----------------------------------------------------- 
+
+decoration {
+    rounding = 10
+    blur {
+        enabled = true
+        size = 10
+        passes = 1
+        new_optimizations = on
+        ignore_opacity = true
+        xray = true 
+        blurls = waybar
+    }
+    active_opacity = 1.0
+    inactive_opacity = 0.8
+    fullscreen_opacity = 1.0
+
+    shadow {
+        enabled = false
+        range = 20
+        render_power = 3
+        color = 0x66000000
+    }
+    #drop_shadow = true
+    #shadow_range = 30
+    #shadow_render_power = 3
+    #col.shadow = 0x66000000
+}

hypr/conf/environments/default.conf

@@ -6,7 +6,7 @@
 env = XDG_SESSION_TYPE,wayland
 env = XDG_SESSION_DESKTOP,Hyprland
 env = QT_QPA_PLATFORM,wayland
+env = QT_QPA_PLATFORMTHEME,qt6ct
 env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
 env = QT_AUTO_SCREEN_SCALE_FACTOR,1
 env = MOZ_ENABLE_WAYLAND,1
-env = GDK_SCALE,1

hypr/conf/fcitx5.conf

@@ -3,3 +3,5 @@ exec-once = fcitx5 -d --replace
 exec-once = fcitx5-remote -r
 
 bind=$mainMod CTRL, E, exec, pkill fcitx5 -9;sleep 1;fcitx5 -d --replace; sleep 1;fcitx5-remote -r
+
+env=QT_IM_MODULE,fcitx

hypr/conf/hidpi.conf

@@ -3,4 +3,4 @@ xwayland {
 }
 
 env = GDK_SCALE,2
-env = QT_SCALE_FACTOR=2
+env = QT_AUTO_SCREEN_SCALE_FACTOR,1

hypr/conf/keybindings/custom.conf

@@ -9,11 +9,14 @@ $mainMod = SUPER
 # Applications
 bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
 bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
-bind = $mainMod, period, exec, emote
+bind = $mainMod SHIFT, E, exec, emote
 
 # Windows
 bind = $mainMod, Q, killactive
 bind = $mainMod, F, fullscreen
+bind = $mainMod SHIFT, F, fullscreen, 1
+bind = $mainMod CTRL SHIFT, F, fullscreen, 2
+bind = $mainMod ALT, F, fakefullscreen
 bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
 bind = $mainMod, T, togglefloating
 bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
@@ -29,21 +32,25 @@ bind = $mainMod SHIFT, left, resizeactive, -100 0
 bind = $mainMod SHIFT, up, resizeactive, 0 -100
 bind = $mainMod SHIFT, down, resizeactive, 0 100
 bind = $mainMod, G, togglegroup
+bind = $mainMod CTRL, Tab, changegroupactive, f
 
 # Actions
 bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
 bind = $mainMod CTRL, Q, exec, wlogout
 bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
 bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
+bind = $mainMod, SPACE, exec, rofi -show drun -replace -i
 bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
 bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
 bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
-bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
 bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
 bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
+bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
 bind = $mainMod, 1, workspace, 1

hypr/conf/keybindings/default.conf

@@ -7,90 +7,88 @@
 $mainMod = SUPER
 
 # Applications
-bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
-bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
+bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh # Open the terminal
+bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh # Open the browser
+bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh # Open the filemanager
 
 # Windows
-bind = $mainMod, Q, killactive
-bind = $mainMod, F, fullscreen
-bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
-bind = $mainMod, T, togglefloating
-bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
-bind = $mainMod, J, togglesplit
-bind = $mainMod, left, movefocus, l
-bind = $mainMod, right, movefocus, r
-bind = $mainMod, up, movefocus, u
-bind = $mainMod, down, movefocus, d
-bindm = $mainMod, mouse:272, movewindow
-bindm = $mainMod, mouse:273, resizewindow
-bind = $mainMod SHIFT, right, resizeactive, 100 0
-bind = $mainMod SHIFT, left, resizeactive, -100 0
-bind = $mainMod SHIFT, up, resizeactive, 0 -100
-bind = $mainMod SHIFT, down, resizeactive, 0 100
-bind = $mainMod, G, togglegroup
+bind = $mainMod, Q, killactive # Kill active window
+bind = $mainMod, F, fullscreen # Set active window to fullscreen
+bind = $mainMod, T, togglefloating # Toggle active windows into floating mode
+bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh # Toggle all windows into floating mode
+bind = $mainMod, J, togglesplit # Toggle split
+bind = $mainMod, left, movefocus, l # Move focus left
+bind = $mainMod, right, movefocus, r # Move focus right
+bind = $mainMod, up, movefocus, u # Move focus up
+bind = $mainMod, down, movefocus, d # Move focus down
+bindm = $mainMod, mouse:272, movewindow # Move window with the mouse
+bindm = $mainMod, mouse:273, resizewindow # Resize window with the mouse
+bind = $mainMod SHIFT, right, resizeactive, 100 0 # Increase window width with keyboard
+bind = $mainMod SHIFT, left, resizeactive, -100 0 # Reduce window width with keyboard
+bind = $mainMod SHIFT, down, resizeactive, 0 100 # Increase window height with keyboard
+bind = $mainMod SHIFT, up, resizeactive, 0 -100 # Reduce window height with keyboard
+bind = $mainMod, G, togglegroup # Toggle window group
 
 # Actions
-bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh
-bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
-bind = $mainMod CTRL, Q, exec, wlogout
-bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
-bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
-bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
-bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
-bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
-bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
-bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
-bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
-bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
-bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
-bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
-bind = $mainMod CTRL, P, exec, hyprpicker -a
-bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
-bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
+bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh # Toggle animations
+bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh # Take a screenshot
+bind = $mainMod CTRL, Q, exec, wlogout # Start wlogout
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh # Change the wallpaper
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select # Open wallpaper selector
+bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i # Open application launcher
+bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh # Show keybindings
+bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh # Reload waybar
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh # Toggle waybar
+bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh # Reload hyprland config
+bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh # Open clipboard manager
+bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh # Open waybar theme switcher
+bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh # Toggle screenshader
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh # Toggle game mode
 
 # Workspaces
-bind = $mainMod, 1, workspace, 1
-bind = $mainMod, 2, workspace, 2
-bind = $mainMod, 3, workspace, 3
-bind = $mainMod, 4, workspace, 4
-bind = $mainMod, 5, workspace, 5
-bind = $mainMod, 6, workspace, 6
-bind = $mainMod, 7, workspace, 7
-bind = $mainMod, 8, workspace, 8
-bind = $mainMod, 9, workspace, 9
-bind = $mainMod, 0, workspace, 10
-bind = $mainMod SHIFT, 1, movetoworkspace, 1
-bind = $mainMod SHIFT, 2, movetoworkspace, 2
-bind = $mainMod SHIFT, 3, movetoworkspace, 3
-bind = $mainMod SHIFT, 4, movetoworkspace, 4
-bind = $mainMod SHIFT, 5, movetoworkspace, 5
-bind = $mainMod SHIFT, 6, movetoworkspace, 6
-bind = $mainMod SHIFT, 7, movetoworkspace, 7
-bind = $mainMod SHIFT, 8, movetoworkspace, 8
-bind = $mainMod SHIFT, 9, movetoworkspace, 9
-bind = $mainMod SHIFT, 0, movetoworkspace, 10
-bind = $mainMod, mouse_down, workspace, e+1
-bind = $mainMod, mouse_up, workspace, e-1
-bind = $mainMod CTRL, down, workspace, empty
-
-# Fn keys
-bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10%
-bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%-
-bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5%
-bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5%
-bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
-bind = , XF86AudioPlay, exec, playerctl play-pause
-bind = , XF86AudioPause, exec, playerctl pause
-bind = , XF86AudioNext, exec, playerctl next
-bind = , XF86AudioPrev, exec, playerctl previous
-bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle
-bind = , XF86Calculator, exec, qalculate-gtk
-bind = , XF86Lock, exec, hyprlock
-bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/hypr/settings/settings.sh
+bind = $mainMod, 1, workspace, 1 # Open workspace 1
+bind = $mainMod, 2, workspace, 2 # Open workspace 2
+bind = $mainMod, 3, workspace, 3 # Open workspace 3
+bind = $mainMod, 4, workspace, 4 # Open workspace 4
+bind = $mainMod, 5, workspace, 5 # Open workspace 5
+bind = $mainMod, 6, workspace, 6 # Open workspace 6
+bind = $mainMod, 7, workspace, 7 # Open workspace 7
+bind = $mainMod, 8, workspace, 8 # Open workspace 8
+bind = $mainMod, 9, workspace, 9 # Open workspace 9
+bind = $mainMod, 0, workspace, 10 # Open workspace 10
+bind = $mainMod SHIFT, 1, movetoworkspace, 1 # Move active window to workspace 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2 # Move active window to workspace 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3 # Move active window to workspace 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4 # Move active window to workspace 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5 # Move active window to workspace 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6 # Move active window to workspace 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7 # Move active window to workspace 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8 # Move active window to workspace 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9 # Move active window to workspace 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10 # Move active window to workspace 10
+bind = $mainMod, mouse_down, workspace, e+1 # Open next workspace
+bind = $mainMod, mouse_up, workspace, e-1 # Open previous workspace
+bind = $mainMod CTRL, down, workspace, empty # Open the next empty workspace
 
 # Passthrough SUPER KEY to Virtual Machine
-bind = $mainMod, P, submap, passthru
+bind = $mainMod, P, submap, passthru # Passthrough SUPER key to virtual machine
 submap = passthru
-bind = SUPER, Escape, submap, reset
+bind = SUPER, Escape, submap, reset # Get SUPER key back from virtual machine
 submap = reset
+
+# Fn keys
+bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10% # Increase brightness by 10%
+bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%- # Reduce brightness by 10%
+bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5% # Increase volume by 5%
+bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5% # Reduce volume by 5%
+bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle # Toggle mute
+bind = , XF86AudioPlay, exec, playerctl play-pause # Audio play pause
+bind = , XF86AudioPause, exec, playerctl pause # Audio pause
+bind = , XF86AudioNext, exec, playerctl next # Audio next
+bind = , XF86AudioPrev, exec, playerctl previous # Audio previous
+bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle # Toggle microphone
+bind = , XF86Calculator, exec, qalculate-gtk # Open calculator
+bind = , XF86Lock, exec, hyprlock # Open screenlock
+bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
+

hypr/conf/layouts/default.conf

@@ -8,7 +8,6 @@ dwindle {
 }
 
 master {
-    new_is_master = true
 }
 
 gestures {

hypr/conf/misc.conf

@@ -6,5 +6,6 @@ misc {
     disable_hyprland_logo = true
     disable_splash_rendering = true
     enable_swallow = true
-    swallow_regex = ^(Alacritty)$
+    swallow_regex = ^(Alacritty|kitty|thunar)$
+    font_family = FiraCode Nerd Font
 }

hypr/conf/ml4w.conf

@@ -22,9 +22,9 @@ windowrulev2 = float,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = size 400 500,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = move 10% 20%,class:(ml4w-dotfiles-settings.py)
 
-windowrulev2 = float,class:(com.ml4w.hyprlandsettings)
-windowrulev2 = size 700 600,class:(com.ml4w.hyprlandsettings)
-windowrulev2 = center,class:(com.ml4w.hyprlandsettings)
+windowrulev2 = float,class:(com.ml4w.hyprland.settings)
+windowrulev2 = size 700 600,class:(com.ml4w.hyprland.settings)
+windowrulev2 = center,class:(com.ml4w.hyprland.settings)
 
 windowrulev2 = float,class:(ml4w-hyprland-settings.py)
 windowrulev2 = size 700 600,class:(ml4w-hyprland-settings.py)
@@ -37,4 +37,3 @@ windowrulev2 = center,class:(dotfiles-floating)
 env = APPIMAGELAUNCHER_DISABLE,1
 env = XCURSOR_SIZE,24
 env = XDG_CURRENT_DESKTOP,Hyprland
-

hypr/conf/windowrules/custom.conf

@@ -14,6 +14,11 @@ windowrule = pin,^(showmethekey-gtk)$
 layerrule = blur, gtk-layer-shell
 layerrule = blur, logout_dialog
 
-windowrule = float,title=^(Mathematica)$
-windowrule = opacity 0.75, ^(Code)$
+windowrule = float,title:^(Mathematica)$ # Mathematica<=14.1
+windowrule = float,title:^(WolframNB)$ # Mathematica>=14.2
+windowrule = opacity 0.75, ^(code)$
+windowrule = opacity 0.75, ^(code-url-handler)$
 windowrule = float,^(QQ)$
+windowrule = float,^(wechat)$
+windowrule = float,^(fdm)$
+windowrule = float,^(xdg-desktop-portal-gtk)$

hypr/conf/windows/default.conf

@@ -11,3 +11,12 @@ general {
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
 }
+
+group {
+    col.border_active = $color11
+    col.border_inactive = rgba(ffffffff)
+    groupbar {
+        col.active = $color11
+        col.inactive = $color13
+    }
+}

hypr/pyprland.toml

@@ -7,6 +7,6 @@ plugins = [
 
 [scratchpads.term]
 animation = "fromTop"
-command = "kitty --class kitty-dropterm"
-class = "kitty-dropterm"
+command = "alacritty --class alacritty-dropterm"
+class = "alacritty-dropterm"
 size = "75% 60%"

hypr/scripts/gamemode.sh

@@ -7,13 +7,18 @@
 #
 
 if [ -f ~/.cache/gamemode ] ;then
-    hyprctl keyword animations:enabled true
-    hyprctl keyword decoration:blur:enabled true
+    hyprctl reload
     rm ~/.cache/gamemode
     notify-send "Gamemode deactivated" "Animations and blur enabled"
 else
-    hyprctl keyword animations:enabled false
-    hyprctl keyword decoration:blur:enabled false
+    hyprctl --batch "\
+        keyword animations:enabled 0;\
+        keyword decoration:drop_shadow 0;\
+        keyword decoration:blur:enabled 0;\
+        keyword general:gaps_in 0;\
+        keyword general:gaps_out 0;\
+        keyword general:border_size 1;\
+        keyword decoration:rounding 0"
 	touch ~/.cache/gamemode
     notify-send "Gamemode activated" "Animations and blur disabled"
 fi

hypr/scripts/gtk.sh

@@ -29,7 +29,7 @@ gsettings set "$gnome_schema" cursor-theme "$cursor_theme"
 gsettings set "$gnome_schema" font-name "$font_name"
 gsettings set "$gnome_schema" color-scheme "prefer-dark"
 
-if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
-    echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
-    hyprctl setcursor $cursor_theme $cursor_size
-fi
+# if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
+#     echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
+#     hyprctl setcursor $cursor_theme $cursor_size
+# fi

hypr/scripts/keybindings.sh

@@ -21,13 +21,29 @@ config_file=${config_file/source=~/}
 config_file="/home/$USER$config_file"
 echo "Reading from: $config_file"
 
-# ----------------------------------------------------- 
-# Parse keybindings
-# ----------------------------------------------------- 
-keybinds=$(grep -oP '(?<=bind = ).*' $config_file)
-keybinds=$(echo "$keybinds" | sed 's/$mainMod/SUPER/g'| sed 's/,\([^,]*\)$/ = \1/' | sed 's/, exec//g' | sed 's/^,//g')
-# ----------------------------------------------------- 
-# Show keybindings in rofi
-# ----------------------------------------------------- 
+keybinds=""
+
+# Detect Start String
+while read -r line
+do
+    if [[ "$line" == "bind"* ]]; then
+
+        line="$(echo "$line" | sed 's/$mainMod/SUPER/g')"
+        line="$(echo "$line" | sed 's/bind = //g')"
+        line="$(echo "$line" | sed 's/bindm = //g')"
+
+        IFS='#' 
+        read -a strarr <<<"$line" 
+        kb_str=${strarr[0]}
+        cm_str=${strarr[1]}
+
+        IFS=',' 
+        read -a kbarr <<<"$kb_str" 
+
+        item="${kbarr[0]}  + ${kbarr[1]}"$'\r'"${cm_str:1}"
+        keybinds=$keybinds$item$'\n'
+    fi 
+done < "$config_file"
+
 sleep 0.2
-rofi -dmenu -i -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"
+rofi -dmenu -i -markup -eh 2 -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"

install.sh

@@ -78,6 +78,7 @@ fi
 if [[ $profile == *"Qtile"* ]]; then
     source .install/qtile-dotfiles.sh
 fi
+source .install/zshfish.sh
 source .install/settings.sh
 source .install/apps.sh
 source .install/gtk.sh

kitty/kitty.conf

@@ -1,5 +1,5 @@
 font_family      Fira Code Nerd Font
-font_size 	    14.0
+font_size        16.0
 bold_font        auto
 italic_font      auto
 bold_italic_font auto
@@ -8,7 +8,18 @@ background_opacity 0.7
 
 confirm_os_window_close 0
 
-enable_audio_bell no
-
 selection_foreground #000000
 selection_background #F5FBFF
+
+detect_urls    yes
+copy_on_select clipboard
+strip_trailing_spaces smart
+rectangle_select_modifiers ctrl+alt
+terminal_select_modifiers shift
+
+enable_audio_bell no
+
+remember_window_size no
+window_padding_width 5
+
+map ctrl+super+enter    launch --cwd=current

nvim/.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,121 @@
+name: Bug Report
+description: File a bug report
+labels: [bug]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before reporting:_ Search [existing issues](https://github.com/ayamir/nvimdots/issues) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
+        > [!IMPORTANT]
+        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+  - type: checkboxes
+    id: is-latest-commit
+    attributes:
+      label: "Version confirmation"
+      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: prerequisites-done
+    attributes:
+      label: "Following prerequisites"
+      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: not-user-config-issue
+    attributes:
+      label: "Not a user config issue"
+      description: "This issue _persists_ after removing ALL user configs. If this is not the case, you should open a [Custom (User) Config Issue](https://github.com/ayamir/nvimdots/issues/new?assignees=&labels=usage&projects=&template=custom_config.yml) instead."
+      options:
+        - label: "Confirm"
+          required: true
+
+  - type: input
+    id: nvim-version
+    attributes:
+      label: "Neovim version"
+      description: "Paste the output of `nvim --version` here"
+      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
+    validations:
+      required: true
+  - type: input
+    id: system-version
+    attributes:
+      label: "Operating system/version"
+      placeholder: "macOS 12.6.1"
+    validations:
+      required: true
+  - type: input
+    id: terminal-version
+    attributes:
+      label: "Terminal name/version"
+      placeholder: "iTerm2 Build 3.4.17"
+    validations:
+      required: true
+  - type: input
+    id: term-env
+    attributes:
+      label: "$TERM environment variable"
+      placeholder: "xterm-256color"
+    validations:
+      required: false
+  - type: dropdown
+    id: branch
+    attributes:
+      label: "Branch info"
+      description: "Which branch are you currently on? If you are not sure, check the output of `git rev-parse --abbrev-ref HEAD`"
+      options:
+        - main (Default/Latest)
+        - 0.9 (Legacy)
+        - 0.8 (Deprecated)
+        - 0.11 (Nightly)
+    validations:
+      required: true
+  - type: dropdown
+    id: fetch-pref
+    attributes:
+      label: "Fetch Preferences"
+      description: "In what way do you fetch resources? If you are not sure, check the value of `use_ssh` in `lua/user/settings.lua`"
+      options:
+        - SSH (use_ssh = true)
+        - HTTPS (use_ssh = false)
+    validations:
+      required: true
+
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: "How to reproduce the issue"
+      description: "Note: Issues without any information will be closed directly"
+      placeholder: |
+        Steps to reproduce the behavior:
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. See error
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: "Expected behavior"
+      description: "Describe the behavior you expect"
+    validations:
+      required: true
+  - type: textarea
+    id: actual-behavior
+    attributes:
+      label: "Actual behavior"
+    validations:
+      required: false
+  - type: textarea
+    id: extras
+    attributes:
+      label: Additional information
+      description: If applicable, you may include logs, images, or videos to help explain your problem
+    validations:
+      required: false

nvim/.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,8 @@
+blank_issues_enabled: true
+contact_links:
+  - name: GitHub Discussions
+    url: https://github.com/ayamir/nvimdots/discussions/new/choose
+    about: Any issue that does not fall into the above categories shall go here
+  - name: GitHub Wiki
+    url: https://github.com/ayamir/nvimdots/wiki
+    about: Make sure you have checked our documentation first. To be explicit, the "Issues" section

nvim/.github/ISSUE_TEMPLATE/custom_config.yml

@@ -0,0 +1,111 @@
+name: Custom (User) Config Issue
+description: Problems when trying to implement your custom config
+labels: [usage]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before requesting:_ Make sure you've read through our [Wiki: Usage](https://github.com/ayamir/nvimdots/wiki/Usage) before you start to add things to nvimdots!
+        > [!IMPORTANT]
+        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+  - type: checkboxes
+    id: is-latest-commit
+    attributes:
+      label: "Version confirmation"
+      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: prerequisites-done
+    attributes:
+      label: "Following prerequisites"
+      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
+      options:
+        - label: "Confirm"
+          required: true
+
+  - type: input
+    id: nvim-version
+    attributes:
+      label: "Neovim version"
+      description: "Paste the output of `nvim --version` here"
+      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
+    validations:
+      required: true
+  - type: dropdown
+    id: branch-info
+    attributes:
+      label: "Branch info"
+      description: "This issue template mainly targets `main` branch. Check the output of `git rev-parse --abbrev-ref HEAD` if you're not sure."
+      options:
+        - main (Default/Latest)
+        - 0.9 (Legacy)
+        - 0.8 (Deprecated)
+        - 0.11 (Nightly)
+    validations:
+      required: true
+
+  - type: textarea
+    id: folder-structure-ta
+    attributes:
+      label: "Minimal (user) folder structure required to reproduce the issue"
+      description: "Note: You only need to describe where the *new/modified files* are. This section will be automatically formatted."
+      render: console
+      placeholder: |
+        └── lua/
+          ├── core/
+          ├── keymap/                    default keymaps
+          ├── modules/                   default plugins and plugin configs
+          └── user                       custom configs root directory
+              ├── configs/               custom plugin config folder
+              │   ├── dap-clients/       custom dap client config folder
+              │   ├── lsp-servers/       custom lsp server config folder
+              │   └── your-config.lua    your plugin configs (if applicable)
+              ├── keymap/                custom keymap folder
+              │   └── your-config.lua    your keymap overrides (if applicable)
+              ├── plugins/               custom plugin folder
+              │   └── your-config.lua    your plugins (if applicable)
+              ├── event.lua              custom `core/events.lua` overrides
+              ├── options.lua            custom `core/options.lua` overrides
+              └── settings.lua           custom `core/settings.lua` overrides
+    validations:
+      required: true
+
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: "Minimal config with steps on how to reproduce the issue"
+      description: "Note: Issues without any information will be closed directly"
+      placeholder: |
+        This is my custom config (`specs.lua`):
+        ```lua
+        return {
+          popup = {
+            delay_ms = 20,
+          }
+        }
+        ```
+
+        Steps to reproduce the behavior:
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. See error
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: "Expected behavior"
+      description: "Describe the behavior you expect"
+    validations:
+      required: true
+  - type: textarea
+    id: extras
+    attributes:
+      label: Additional information
+      description: If applicable, you may include logs, images, or videos to help explain your problem
+    validations:
+      required: false

nvim/.github/ISSUE_TEMPLATE/feature_request.yml

@@ -0,0 +1,22 @@
+name: Feature Request
+description: Request an enhancement for this project
+labels: [enhancement]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before requesting:_ Search [existing issues](https://github.com/ayamir/nvimdots/labels/enhancement) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
+
+  - type: textarea
+    id: feat-desc
+    attributes:
+      label: "Feature description"
+    validations:
+      required: true
+  - type: textarea
+    id: extras
+    attributes:
+      label: "Additional information"
+      description: "If applicable, you may include images or videos to help explain your request"
+    validations:
+      required: false

nvim/.github/ISSUE_TEMPLATE/lsp_issue_report.yml

@@ -0,0 +1,148 @@
+name: LSP Issue
+description: File a bug report related to LSPs
+labels: [bug, lsp]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before reporting:_ Search [existing issues](https://github.com/ayamir/nvimdots/issues) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
+        > [!IMPORTANT]
+        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+  - type: checkboxes
+    id: is-latest-commit
+    attributes:
+      label: "Version confirmation"
+      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: prerequisites-done
+    attributes:
+      label: "Following prerequisites"
+      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: not-user-config-issue
+    attributes:
+      label: "Not a user config issue"
+      description: "This issue _persists_ after removing ALL user configs. If this is not the case, you should open a [Custom (User) Config Issue](https://github.com/ayamir/nvimdots/issues/new?assignees=&labels=usage&projects=&template=custom_config.yml) instead."
+      options:
+        - label: "Confirm"
+          required: true
+
+  - type: input
+    id: nvim-version
+    attributes:
+      label: "Neovim version"
+      description: "Paste the output of `nvim --version` here"
+      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
+    validations:
+      required: true
+  - type: input
+    id: system-version
+    attributes:
+      label: "Operating system/version"
+      placeholder: "macOS 12.6.1"
+    validations:
+      required: true
+  - type: input
+    id: terminal-version
+    attributes:
+      label: "Terminal name/version"
+      placeholder: "iTerm2 Build 3.4.17"
+    validations:
+      required: true
+  - type: input
+    id: term-env
+    attributes:
+      label: "$TERM environment variable"
+      placeholder: "xterm-256color"
+    validations:
+      required: false
+  - type: dropdown
+    id: branch
+    attributes:
+      label: "Branch info"
+      description: "Which branch are you currently on? If you are not sure, check the output of `git rev-parse --abbrev-ref HEAD`"
+      options:
+        - main (Default/Latest)
+        - 0.9 (Legacy)
+        - 0.8 (Deprecated)
+        - 0.11 (Nightly)
+    validations:
+      required: true
+  - type: dropdown
+    id: fetch-pref
+    attributes:
+      label: "Fetch Preferences"
+      description: "In what way do you fetch resources? If you are not sure, check the value of `use_ssh` in `lua/user/settings.lua`"
+      options:
+        - SSH (use_ssh = true)
+        - HTTPS (use_ssh = false)
+    validations:
+      required: true
+  - type: input
+    id: servers
+    attributes:
+      label: "Affected language servers"
+      description: "If this issue is specific to one or more language servers, list them here. If not, write `any`"
+      placeholder: "lua-language-server, clangd"
+    validations:
+      required: true
+
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: "How to reproduce the issue"
+      description: "Note: Issues without any information will be closed directly"
+      placeholder: |
+        Steps to reproduce the behavior:
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. See error
+    validations:
+      required: true
+
+  - type: textarea
+    id: actual-behavior
+    attributes:
+      label: "Actual behavior"
+      description: "Briefly describe what you've observed"
+    validations:
+      required: true
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: "Expected behavior"
+      description: "Describe the behavior you expect"
+    validations:
+      required: false
+  - type: textarea
+    id: support-info
+    attributes:
+      label: "Support info"
+      description: "Plase include information (screenshots) from `:LspInfo` and `:Mason`"
+      placeholder: |
+        :LspInfo
+        :Mason
+    validations:
+      required: true
+  - type: textarea
+    id: lsp-logs
+    attributes:
+      label: "Logs"
+      description: "Please copy and paste any relevant log output (e.g., `${HOME}/.local/state/nvim/lsp.log` and `${HOME}/.cache/nvim/lsp.log`). This section will be automatically formatted"
+      render: console
+    validations:
+      required: false
+  - type: textarea
+    id: extras
+    attributes:
+      label: "Additional information"
+      description: "If applicable, you may include images or videos to help explain your problem"
+    validations:
+      required: false