new: yazi

.bashrc

@@ -109,7 +109,7 @@ alias setkb='setxkbmap de;echo "Keyboard set back to de."'
 alias res1='xrandr --output DisplayPort-0 --mode 2560x1440 --rate 120'
 alias res2='xrandr --output DisplayPort-0 --mode 1920x1080 --rate 120'
 
-export PATH="/usr/lib/ccache/bin/:$PATH"
+export PATH="$HOME/.local/bin/:/usr/lib/ccache/bin/:$PATH"
 
 # -----------------------------------------------------
 # DEVELOPMENT

.gitmodules

@@ -0,0 +1,3 @@
+[submodule "yazi/flavors/tokyo-night.yazi"]
+	path = yazi/flavors/tokyo-night.yazi
+	url = https://github.com/BennyOe/tokyo-night.yazi.git

.install/cleanup.sh

@@ -13,24 +13,6 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
-# Check for running NetworkManager.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
-    echo ":: NetworkManager.service already running."
-else
-    sudo systemctl enable NetworkManager.service
-    sudo systemctl start NetworkManager.service
-    echo ":: NetworkManager.service activated successfully."    
-fi
-
-# Check for running bluetooth.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
-    echo ":: bluetooth.service already running."
-else
-    sudo systemctl enable bluetooth.service
-    sudo systemctl start bluetooth.service
-    echo ":: bluetooth.service activated successfully."    
-fi
-
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/hyprland-dotfiles.sh

@@ -5,6 +5,9 @@
 if [ -d ~/dotfiles-versions/$version/alacritty ]; then
     _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/kitty ]; then
+    _installSymLink kitty ~/.config/kitty ~/dotfiles/kitty/ ~/.config
+fi
 if [ -d ~/dotfiles-versions/$version/vim ]; then
     _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
 fi
@@ -43,5 +46,15 @@ fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
     _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
 fi
+if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
+    _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
+fi
+if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
+    if [ ! -d ~/.local/share/icons ]; then mkdir -pv ~/.local/share/icons; fi
+    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors ~/.local/share/icons/
+fi
+if [ -d ~/dotfiles-versions/$version/ranger ]; then
+    _installSymLink ranger ~/.config/ranger ~/dotfiles/ranger/ ~/.config
+fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -1,65 +1,59 @@
 packagesPacman=(
     "pacman-contrib"
     "vim"
-    "bluez"
+    "bat"
-    "bluez-utils"
+    "fzf"
+    "zsh"
+    "fastfetch"
+    "ranger"
+    "btop"
     "neovim"
     "wget"
     "unzip"
     "alacritty"
-    "chromium" 
     "dunst"
     "starship"
     "mpv"
     "thunar"
     "nautilus"
-    "mousepad"
     "noto-fonts"
     "otf-font-awesome"
     "ttf-fira-sans"
     "ttf-fira-code"
     "ttf-firacode-nerd"
+    "ttf-firacode-nerd"
     "figlet"
     "vlc"
     "eza"
     "python-pip"
     "python-psutil"
     "python-rich"
-    "python-click" 
     "python-pywal"
-    "python-gobject"
     "pavucontrol"
     "tumbler"
     "papirus-icon-theme"
-    "breeze-icons"
-    "polkit-gnome"
-    "brightnessctl"
     "gum"
     "man-pages"
-    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
-    "xdg-desktop-portal-gtk"
+#    "xdg-desktop-portal-gtk"
-    "networkmanager"
-    "network-manager-applet"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
-    "gtk4"
-    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
-    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
-    "blueman"
+    "pipewire-pulse"
+    "wireplumber"
 );
 
 packagesYay=(
-    "bibata-cursor-theme" 
+    "vimix-cursors"
+    "orchis-theme"
     "trizen"
-    "pacseek"
+    "google-chrome"
 );

.install/packages/hyprland-packages.sh

@@ -3,17 +3,19 @@ packagesPacman=(
     "hyprpaper"
     "hyprlock"
     "hypridle"
-    "xdg-desktop-portal-hyprland" 
+    #    "xdg-desktop-portal-hyprland"
     "waybar"
     "grim"
     "slurp"
     "swappy"
     "cliphist"
-);
+    "kitty"
+)
 
 packagesYay=(
+    "pyprland"
     "wlogout"
     "nwg-look"
     "eww"
     "hyprshade"
-);
+)

.install/qtile-dotfiles.sh

@@ -35,4 +35,7 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
+    _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
+fi
 echo ":: Symbolic links created."

.install/wallpaper.sh

@@ -5,16 +5,17 @@ echo -e "${GREEN}"
 figlet "Wallpapers"
 echo -e "${NONE}"
 if [ ! -d ~/wallpaper ]; then
-    echo "Do you want to download the wallpapers from repository https://gitlab.com/stephan-raabe/wallpaper/ ?"
+    echo "Do you want to download the wallpapers from repository https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ?"
     echo "If not, the script will install 3 default wallpapers in ~/wallpaper/"
     echo ""
     if gum confirm "Do you want to download the repository?" ;then
-        wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
+        # wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
-        unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
+        # unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
-        if [ ! -d ~/wallpaper/ ]; then
+        # if [ ! -d ~/wallpaper/ ]; then
-            mkdir ~/wallpaper
+        #     mkdir ~/wallpaper
-        fi
+        # fi
-        cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        # cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        git clone https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ~/wallpaper
         echo "Wallpapers from the repository installed successfully."
     elif [ $? -eq 130 ]; then
         exit 130

.settings/browser.sh

@@ -1 +1 @@
-chromium
+google-chrome-stable

.settings/editor.sh

@@ -1 +1 @@
-mousepad
+~/dotfiles/.settings/terminal.sh -e vim

.settings/networkmanager.sh

@@ -1 +0,0 @@
-nm-connection-editor

.settings/rofi-border-radius.rasi

@@ -0,0 +1,3 @@
+* {
+    border-radius:  15px;
+}

.settings/rofi-border.rasi

@@ -1 +1,3 @@
-* { border-width: 3px; }
+* {
+    border-width:   2px;
+}

.settings/software.sh

@@ -1 +0,0 @@
-alacritty -e pacseek

.settings/terminal.sh

@@ -1 +1 @@
-alacritty
+kitty

Vimix-hyprcursors/manifest.hl

@@ -0,0 +1,4 @@
+name = Extracted Theme
+description = Automatically extracted with hyprcursor-util
+version = 0.1
+cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -9,5 +9,8 @@ style = "Regular"
 opacity = 0.7
 
 [window.padding]
-x = 15
+x = 0
-y = 15
+y = 0
+
+[selection]
+save_to_clipboard = true

chrome-flags.conf

@@ -0,0 +1 @@
+--ozone-platform=wayland --enable-wayland-ime

fastfetch/config.jsonc

@@ -1,110 +1,181 @@
-//  Thanks to Bina
+// Note that you must replace the image path to an existing image to display it.
 {
     "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-  "logo": {
+    // "logo": {
-      "padding": {
+    //     "type": "iterm",
-      "top": 2
+    //     "source": "/Users/carter/Desktop/apple1.png",
-      }
+    //     "width": 28,
-  },
+    //     "height": 12
+    // },
     "display": {
-        "separator": " ➜  "
+        //    "separator": "  "
+        "separator": " "
     },
     "modules": [
-      "break",
-      "break",
-      "break",
-       {
-          "type": "os",
-          "key": "OS   ",
-          "keyColor": "31",  // = color1
-      },
-      {
-          "type": "kernel",
-          "key": " ├  ",
-          "keyColor": "31",
-      },
-      {
-          "type": "packages",
-          "format": "{} (pacman)",
-          "key": " ├ 󰏖 ",
-          "keyColor": "31",  
-      },
-      {
-          "type": "shell",
-          "key": " └  ",
-          "keyColor": "31", 
-      },
-      "break",
-      {
-          "type": "wm",
-          "key": "WM   ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "wmtheme",
-          "key": " ├ 󰉼 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "icons",
-          "key": " ├ 󰀻 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "cursor",
-          "key": " ├  ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "terminal",
-          "key": " ├  ",
-          "keyColor": "32",
-      },
-      {
-          "type": "terminalfont",
-          "key": " └  ",
-          "keyColor": "32", 
-      },
-      "break",
         {
             "type": "host",
-          "format": "{5} {1} Type {2}",
+            "key": "╭─󰌢",
-          "key": "PC   ",
+            "keyColor": "green"
-          "keyColor": "33",
         },
         {
             "type": "cpu",
-          "format": "{1} ({3}) @ {7} GHz",
+            "key": "├─󰻠",
-          "key": " ├  ",
+            "keyColor": "green"
-          "keyColor": "33",
         },
         {
             "type": "gpu",
-          "format": "{1} {2} @ {12} GHz",            
+            "key": "├─󰍛",
-          "key": " ├ 󰢮 ",
+            "keyColor": "green"
-          "keyColor": "33",
-      },
-      {
-          "type": "memory",
-          "key": " ├  ",
-          "keyColor": "33",
-      },
-      {
-          "type": "swap",
-          "key": " ├ 󰓡 ",
-          "keyColor": "33",
         },
         {
             "type": "disk",
-          "key": " ├ 󰋊 ",
+            "key": "├─",
-          "keyColor": "33",
+            "keyColor": "green"
         },
         {
-          "type": "monitor",
+            "type": "memory",
-          "key": " └  ",
+            "key": "├─󰑭",
-          "keyColor": "33",
+            "keyColor": "green"
+        },
+        {
+            "type": "swap",
+            "key": "├─󰓡",
+            "keyColor": "green"
+        },
+        {
+            "type": "display",
+            "key": "├─󰍹",
+            "keyColor": "green"
+        },
+        {
+            "type": "battery",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "poweradapter",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "gamepad",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "bluetooth",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "sound",
+            "key": "╰─",
+            "keyColor": "green"
         },
         "break",
+        {
+            "type": "shell",
+            "key": "╭─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminal",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "editor",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminalfont",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "lm",
+            "key": "├─󰧨",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "de",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "wm",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "theme",
+            "key": "├─󰉼",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "icons",
+            "key": "╰─󰀻",
+            "keyColor": "yellow"
+        },
         "break",
+        {
+            "type": "title",
+            "key": "╭─",
+            "format": "{1}@{2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "os",
+            "key": "├─󰣇", // Just get your distro's logo off nerdfonts.com
+            "keyColor": "blue"
+        },
+        {
+            "type": "kernel",
+            "key": "├─",
+            "format": "{1} {2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "packages",
+            "key": "├─󰏖",
+            "keyColor": "blue"
+        },
+        {
+            "type": "uptime",
+            "key": "├─󰅐",
+            "keyColor": "blue"
+        },
+        {
+            "type": "media",
+            "key": "├─󰝚",
+            "keyColor": "blue"
+        },
+        {
+            "type": "cpuusage",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "loadavg",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "processes",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "localip",
+            "key": "╰─󰩟",
+            "compact": true,
+            "keyColor": "blue"
+        },
+        "break",
+        {
+            "type": "custom",
+            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻 "
+        }
     ]
 }

hypr/conf/animation.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/animations/default.conf
+source = ~/dotfiles/hypr/conf/animations/animations-high.conf

hypr/conf/autostart.conf

@@ -29,8 +29,8 @@ exec-once = ~/dotfiles/hypr/scripts/ml4w-welcome-autostart.sh
 # Start ewww daemon
 exec-once = ~/dotfiles/hypr/scripts/eww.sh
 
+exec-once = pypr
+
+
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
-
-# Load configuration from ML4W Hyprland Settings App
-exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1 +1,2 @@
-exec-once = hyprctl setcursor Bibata-Modern-Ice 24
+exec-once = hyprctl setcursor Vimix-hyprcursors 24
+env = HYPRCURSOR_THEME,Vimix-hyprcursors

hypr/conf/decoration.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/decorations/default.conf
+source = ~/dotfiles/hypr/conf/decorations/custom.conf

hypr/conf/decorations/custom.conf

@@ -0,0 +1,31 @@
+# ----------------------------------------------------- 
+# General window decoration
+# name: "Default"
+# ----------------------------------------------------- 
+
+decoration {
+    rounding = 10
+    blur {
+        enabled = true
+        size = 10
+        passes = 3
+        new_optimizations = on
+        ignore_opacity = true
+        xray = false
+        blurls = waybar
+    }
+    active_opacity = 1.0
+    inactive_opacity = 0.8
+    fullscreen_opacity = 1.0
+
+    shadow {
+        enabled = true
+        range = 30
+        render_power = 3
+        color = 0x66000000
+    }
+    #drop_shadow = true
+    #shadow_range = 30
+    #shadow_render_power = 3
+    #col.shadow = 0x66000000
+}

hypr/conf/environments/default.conf

@@ -6,6 +6,7 @@
 env = XDG_SESSION_TYPE,wayland
 env = XDG_SESSION_DESKTOP,Hyprland
 env = QT_QPA_PLATFORM,wayland
+env = QT_QPA_PLATFORMTHEME,qt6ct
 env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
 env = QT_AUTO_SCREEN_SCALE_FACTOR,1
 env = MOZ_ENABLE_WAYLAND,1

hypr/conf/keybinding.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/keybindings/default.conf
+source = ~/dotfiles/hypr/conf/keybindings/custom.conf

hypr/conf/keybindings/custom.conf

@@ -0,0 +1,104 @@
+# -----------------------------------------------------
+# Key bindings
+# name: "Default"
+# -----------------------------------------------------
+
+# SUPER KEY
+$mainMod = SUPER
+
+# Applications
+bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
+bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
+bind = $mainMod SHIFT, E, exec, emote
+
+# Windows
+bind = $mainMod, Q, killactive
+bind = $mainMod, F, fullscreen
+bind = $mainMod SHIFT, F, fullscreen, 1
+bind = $mainMod CTRL SHIFT, F, fullscreen, 2
+bind = $mainMod ALT, F, fakefullscreen
+bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
+bind = $mainMod, T, togglefloating
+bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
+bind = $mainMod, J, togglesplit
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow
+bind = $mainMod SHIFT, right, resizeactive, 100 0
+bind = $mainMod SHIFT, left, resizeactive, -100 0
+bind = $mainMod SHIFT, up, resizeactive, 0 -100
+bind = $mainMod SHIFT, down, resizeactive, 0 100
+bind = $mainMod, G, togglegroup
+bind = $mainMod CTRL, Tab, changegroupactive, f
+
+# Actions
+bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
+bind = $mainMod CTRL, Q, exec, wlogout
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
+bind = $mainMod, SPACE, exec, rofi -show drun -replace -i
+bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
+bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
+bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
+bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
+bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
+bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
+
+# Workspaces
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+bind = $mainMod CTRL, down, workspace, empty
+bind = $mainMod CTRL, left, workspace, e-1
+bind = $mainMod CTRL, right, workspace, e+1
+
+# Fn keys
+bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10%
+bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%-
+bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5% && notify-send -t 400 "Volume: $(pactl get-sink-volume @DEFAULT_SINK@ | awk '/front-left/ {print $5}')"
+bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5% && notify-send -t 400 "Volume: $(pactl get-sink-volume @DEFAULT_SINK@ | awk '/front-left/ {print $5}')"
+bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bind = , XF86AudioPlay, exec, playerctl play-pause
+bind = , XF86AudioPause, exec, playerctl pause
+bind = , XF86AudioNext, exec, playerctl next
+bind = , XF86AudioPrev, exec, playerctl previous
+bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle
+bind = , XF86Calculator, exec, qalculate-gtk
+bind = , XF86Lock, exec, hyprlock
+bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/hypr/settings/settings.sh
+
+# Passthrough SUPER KEY to Virtual Machine
+bind = $mainMod, P, submap, passthru
+submap = passthru
+bind = SUPER, Escape, submap, reset
+submap = reset
+
+# Pyprland
+bind = $mainMod SHIFT, RETURN, exec, pypr toggle term

hypr/conf/keyboard.conf

@@ -3,7 +3,7 @@
 # https://wiki.hyprland.org/Configuring/Variables/#input
 # -----------------------------------------------------
 input {
-    kb_layout = de
+    kb_layout = us
     kb_variant =
     kb_model =
     kb_options =
@@ -11,7 +11,9 @@ input {
     follow_mouse = 1
     mouse_refocus=false
     touchpad {
-        natural_scroll = false
+        natural_scroll = true
+        disable_while_typing=true
+        tap-to-click=true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }

hypr/conf/layouts/default.conf

@@ -8,7 +8,6 @@ dwindle {
 }
 
 master {
-    new_is_master = true
 }
 
 gestures {

hypr/conf/layouts/laptop.conf

@@ -12,5 +12,12 @@ master {
 }
 
 gestures {
-    workspace_swipe = true
+  workspace_swipe=true
+  workspace_swipe_fingers=3
+  workspace_swipe_distance=400
+  workspace_swipe_invert=true
+  workspace_swipe_min_speed_to_force=30
+  workspace_swipe_cancel_ratio=0.5
+  workspace_swipe_create_new=true
+  workspace_swipe_forever=true
 }

hypr/conf/misc.conf

@@ -5,4 +5,7 @@
 misc {
     disable_hyprland_logo = true
     disable_splash_rendering = true
+    enable_swallow = true
+    swallow_regex = ^(Alacritty|kitty|thunar)$
+    font_family = FiraCode Nerd Font
 }

hypr/conf/monitors/dual.conf

@@ -0,0 +1,10 @@
+# ----------------------------------------------------- 
+# Monitor Setup
+# name: "Default"
+# ----------------------------------------------------- 
+
+monitor=DP-1,preferred,0x0,2
+monitor=HDMI-A-1,3840x2160,1920x-275,2,transform,1
+
+workspace=1,monitor:DP-1
+exec-once=hyprctl dispatch workspace 1

hypr/conf/windowrule.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/windowrules/default.conf
+source = ~/dotfiles/hypr/conf/windowrules/custom.conf

hypr/conf/windowrules/custom.conf

@@ -0,0 +1,24 @@
+# -----------------------------------------------------
+# Window rules
+# -----------------------------------------------------
+
+windowrule = tile,^(Microsoft-edge)$
+windowrule = tile,^(Brave-browser)$
+windowrule = tile,^(Chromium)$
+windowrule = float,^(pavucontrol)$
+windowrule = float,^(blueman-manager)$
+windowrule = float,^(nm-connection-editor)$
+windowrule = float,^(qalculate-gtk)$
+windowrule = float,^(showmethekey-gtk)$
+windowrule = pin,^(showmethekey-gtk)$
+layerrule = blur, gtk-layer-shell
+layerrule = blur, logout_dialog
+
+windowrule = float,title:^(Mathematica)$
+windowrule = opacity 0.75, ^(Code)$
+windowrule = opacity 0.75, ^(code-oss)$
+windowrule = opacity 0.75, ^(code-url-handler)$
+windowrule = float,^(QQ)$
+windowrule = float,^(wechat)$
+windowrule = float,^(fdm)$
+windowrule = float,^(xdg-desktop-portal-gtk)$

hypr/conf/windows/default.conf

@@ -6,8 +6,17 @@
 general {
     gaps_in = 10
     gaps_out = 14
-    border_size = 3
+    border_size = 2
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
 }
+
+group {
+    col.border_active = $color11
+    col.border_inactive = rgba(ffffffff)
+    groupbar {
+        col.active = $color11
+        col.inactive = $color13
+    }
+}

hypr/pyprland.toml

@@ -0,0 +1,12 @@
+[pyprland]
+
+plugins = [
+  "scratchpads",
+  "magnify",
+]
+
+[scratchpads.term]
+animation = "fromTop"
+command = "alacritty --class alacritty-dropterm"
+class = "alacritty-dropterm"
+size = "75% 60%"

hypr/scripts/gtk.sh

@@ -29,7 +29,7 @@ gsettings set "$gnome_schema" cursor-theme "$cursor_theme"
 gsettings set "$gnome_schema" font-name "$font_name"
 gsettings set "$gnome_schema" color-scheme "prefer-dark"
 
-if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
+# if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
-    echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
+#     echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
-    hyprctl setcursor $cursor_theme $cursor_size
+#     hyprctl setcursor $cursor_theme $cursor_size
-fi
+# fi

kitty/kitty.conf

@@ -0,0 +1,25 @@
+font_family      Fira Code Nerd Font
+font_size        16.0
+bold_font        auto
+italic_font      auto
+bold_italic_font auto
+
+background_opacity 0.7
+
+confirm_os_window_close 0
+
+selection_foreground #000000
+selection_background #F5FBFF
+
+detect_urls    yes
+copy_on_select clipboard
+strip_trailing_spaces smart
+rectangle_select_modifiers ctrl+alt
+terminal_select_modifiers shift
+
+enable_audio_bell no
+
+remember_window_size no
+window_padding_width 5
+
+map ctrl+super+enter    launch --cwd=current

nvim/.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,121 @@
+name: Bug Report
+description: File a bug report
+labels: [bug]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before reporting:_ Search [existing issues](https://github.com/ayamir/nvimdots/issues) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
+        > [!IMPORTANT]
+        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+  - type: checkboxes
+    id: is-latest-commit
+    attributes:
+      label: "Version confirmation"
+      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: prerequisites-done
+    attributes:
+      label: "Following prerequisites"
+      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: not-user-config-issue
+    attributes:
+      label: "Not a user config issue"
+      description: "This issue _persists_ after removing ALL user configs. If this is not the case, you should open a [Custom (User) Config Issue](https://github.com/ayamir/nvimdots/issues/new?assignees=&labels=usage&projects=&template=custom_config.yml) instead."
+      options:
+        - label: "Confirm"
+          required: true
+
+  - type: input
+    id: nvim-version
+    attributes:
+      label: "Neovim version"
+      description: "Paste the output of `nvim --version` here"
+      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
+    validations:
+      required: true
+  - type: input
+    id: system-version
+    attributes:
+      label: "Operating system/version"
+      placeholder: "macOS 12.6.1"
+    validations:
+      required: true
+  - type: input
+    id: terminal-version
+    attributes:
+      label: "Terminal name/version"
+      placeholder: "iTerm2 Build 3.4.17"
+    validations:
+      required: true
+  - type: input
+    id: term-env
+    attributes:
+      label: "$TERM environment variable"
+      placeholder: "xterm-256color"
+    validations:
+      required: false
+  - type: dropdown
+    id: branch
+    attributes:
+      label: "Branch info"
+      description: "Which branch are you currently on? If you are not sure, check the output of `git rev-parse --abbrev-ref HEAD`"
+      options:
+        - main (Default/Latest)
+        - 0.9 (Legacy)
+        - 0.8 (Deprecated)
+        - 0.11 (Nightly)
+    validations:
+      required: true
+  - type: dropdown
+    id: fetch-pref
+    attributes:
+      label: "Fetch Preferences"
+      description: "In what way do you fetch resources? If you are not sure, check the value of `use_ssh` in `lua/user/settings.lua`"
+      options:
+        - SSH (use_ssh = true)
+        - HTTPS (use_ssh = false)
+    validations:
+      required: true
+
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: "How to reproduce the issue"
+      description: "Note: Issues without any information will be closed directly"
+      placeholder: |
+        Steps to reproduce the behavior:
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. See error
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: "Expected behavior"
+      description: "Describe the behavior you expect"
+    validations:
+      required: true
+  - type: textarea
+    id: actual-behavior
+    attributes:
+      label: "Actual behavior"
+    validations:
+      required: false
+  - type: textarea
+    id: extras
+    attributes:
+      label: Additional information
+      description: If applicable, you may include logs, images, or videos to help explain your problem
+    validations:
+      required: false

nvim/.github/ISSUE_TEMPLATE/config.yml

@@ -0,0 +1,8 @@
+blank_issues_enabled: true
+contact_links:
+  - name: GitHub Discussions
+    url: https://github.com/ayamir/nvimdots/discussions/new/choose
+    about: Any issue that does not fall into the above categories shall go here
+  - name: GitHub Wiki
+    url: https://github.com/ayamir/nvimdots/wiki
+    about: Make sure you have checked our documentation first. To be explicit, the "Issues" section

nvim/.github/ISSUE_TEMPLATE/custom_config.yml

@@ -0,0 +1,111 @@
+name: Custom (User) Config Issue
+description: Problems when trying to implement your custom config
+labels: [usage]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before requesting:_ Make sure you've read through our [Wiki: Usage](https://github.com/ayamir/nvimdots/wiki/Usage) before you start to add things to nvimdots!
+        > [!IMPORTANT]
+        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+  - type: checkboxes
+    id: is-latest-commit
+    attributes:
+      label: "Version confirmation"
+      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: prerequisites-done
+    attributes:
+      label: "Following prerequisites"
+      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
+      options:
+        - label: "Confirm"
+          required: true
+
+  - type: input
+    id: nvim-version
+    attributes:
+      label: "Neovim version"
+      description: "Paste the output of `nvim --version` here"
+      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
+    validations:
+      required: true
+  - type: dropdown
+    id: branch-info
+    attributes:
+      label: "Branch info"
+      description: "This issue template mainly targets `main` branch. Check the output of `git rev-parse --abbrev-ref HEAD` if you're not sure."
+      options:
+        - main (Default/Latest)
+        - 0.9 (Legacy)
+        - 0.8 (Deprecated)
+        - 0.11 (Nightly)
+    validations:
+      required: true
+
+  - type: textarea
+    id: folder-structure-ta
+    attributes:
+      label: "Minimal (user) folder structure required to reproduce the issue"
+      description: "Note: You only need to describe where the *new/modified files* are. This section will be automatically formatted."
+      render: console
+      placeholder: |
+        └── lua/
+          ├── core/
+          ├── keymap/                    default keymaps
+          ├── modules/                   default plugins and plugin configs
+          └── user                       custom configs root directory
+              ├── configs/               custom plugin config folder
+              │   ├── dap-clients/       custom dap client config folder
+              │   ├── lsp-servers/       custom lsp server config folder
+              │   └── your-config.lua    your plugin configs (if applicable)
+              ├── keymap/                custom keymap folder
+              │   └── your-config.lua    your keymap overrides (if applicable)
+              ├── plugins/               custom plugin folder
+              │   └── your-config.lua    your plugins (if applicable)
+              ├── event.lua              custom `core/events.lua` overrides
+              ├── options.lua            custom `core/options.lua` overrides
+              └── settings.lua           custom `core/settings.lua` overrides
+    validations:
+      required: true
+
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: "Minimal config with steps on how to reproduce the issue"
+      description: "Note: Issues without any information will be closed directly"
+      placeholder: |
+        This is my custom config (`specs.lua`):
+        ```lua
+        return {
+          popup = {
+            delay_ms = 20,
+          }
+        }
+        ```
+
+        Steps to reproduce the behavior:
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. See error
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: "Expected behavior"
+      description: "Describe the behavior you expect"
+    validations:
+      required: true
+  - type: textarea
+    id: extras
+    attributes:
+      label: Additional information
+      description: If applicable, you may include logs, images, or videos to help explain your problem
+    validations:
+      required: false

nvim/.github/ISSUE_TEMPLATE/feature_request.yml

@@ -0,0 +1,22 @@
+name: Feature Request
+description: Request an enhancement for this project
+labels: [enhancement]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before requesting:_ Search [existing issues](https://github.com/ayamir/nvimdots/labels/enhancement) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
+
+  - type: textarea
+    id: feat-desc
+    attributes:
+      label: "Feature description"
+    validations:
+      required: true
+  - type: textarea
+    id: extras
+    attributes:
+      label: "Additional information"
+      description: "If applicable, you may include images or videos to help explain your request"
+    validations:
+      required: false

nvim/.github/ISSUE_TEMPLATE/lsp_issue_report.yml

@@ -0,0 +1,148 @@
+name: LSP Issue
+description: File a bug report related to LSPs
+labels: [bug, lsp]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before reporting:_ Search [existing issues](https://github.com/ayamir/nvimdots/issues) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
+        > [!IMPORTANT]
+        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+  - type: checkboxes
+    id: is-latest-commit
+    attributes:
+      label: "Version confirmation"
+      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: prerequisites-done
+    attributes:
+      label: "Following prerequisites"
+      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: not-user-config-issue
+    attributes:
+      label: "Not a user config issue"
+      description: "This issue _persists_ after removing ALL user configs. If this is not the case, you should open a [Custom (User) Config Issue](https://github.com/ayamir/nvimdots/issues/new?assignees=&labels=usage&projects=&template=custom_config.yml) instead."
+      options:
+        - label: "Confirm"
+          required: true
+
+  - type: input
+    id: nvim-version
+    attributes:
+      label: "Neovim version"
+      description: "Paste the output of `nvim --version` here"
+      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
+    validations:
+      required: true
+  - type: input
+    id: system-version
+    attributes:
+      label: "Operating system/version"
+      placeholder: "macOS 12.6.1"
+    validations:
+      required: true
+  - type: input
+    id: terminal-version
+    attributes:
+      label: "Terminal name/version"
+      placeholder: "iTerm2 Build 3.4.17"
+    validations:
+      required: true
+  - type: input
+    id: term-env
+    attributes:
+      label: "$TERM environment variable"
+      placeholder: "xterm-256color"
+    validations:
+      required: false
+  - type: dropdown
+    id: branch
+    attributes:
+      label: "Branch info"
+      description: "Which branch are you currently on? If you are not sure, check the output of `git rev-parse --abbrev-ref HEAD`"
+      options:
+        - main (Default/Latest)
+        - 0.9 (Legacy)
+        - 0.8 (Deprecated)
+        - 0.11 (Nightly)
+    validations:
+      required: true
+  - type: dropdown
+    id: fetch-pref
+    attributes:
+      label: "Fetch Preferences"
+      description: "In what way do you fetch resources? If you are not sure, check the value of `use_ssh` in `lua/user/settings.lua`"
+      options:
+        - SSH (use_ssh = true)
+        - HTTPS (use_ssh = false)
+    validations:
+      required: true
+  - type: input
+    id: servers
+    attributes:
+      label: "Affected language servers"
+      description: "If this issue is specific to one or more language servers, list them here. If not, write `any`"
+      placeholder: "lua-language-server, clangd"
+    validations:
+      required: true
+
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: "How to reproduce the issue"
+      description: "Note: Issues without any information will be closed directly"
+      placeholder: |
+        Steps to reproduce the behavior:
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. See error
+    validations:
+      required: true
+
+  - type: textarea
+    id: actual-behavior
+    attributes:
+      label: "Actual behavior"
+      description: "Briefly describe what you've observed"
+    validations:
+      required: true
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: "Expected behavior"
+      description: "Describe the behavior you expect"
+    validations:
+      required: false
+  - type: textarea
+    id: support-info
+    attributes:
+      label: "Support info"
+      description: "Plase include information (screenshots) from `:LspInfo` and `:Mason`"
+      placeholder: |
+        :LspInfo
+        :Mason
+    validations:
+      required: true
+  - type: textarea
+    id: lsp-logs
+    attributes:
+      label: "Logs"
+      description: "Please copy and paste any relevant log output (e.g., `${HOME}/.local/state/nvim/lsp.log` and `${HOME}/.cache/nvim/lsp.log`). This section will be automatically formatted"
+      render: console
+    validations:
+      required: false
+  - type: textarea
+    id: extras
+    attributes:
+      label: "Additional information"
+      description: "If applicable, you may include images or videos to help explain your problem"
+    validations:
+      required: false

nvim/.github/workflows/lint_code.yml

@@ -0,0 +1,11 @@
+name: lint code
+on: [push, pull_request]
+
+jobs:
+  luacheck:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: lunarmodules/luacheck@v1
+        with:
+          args: . --std luajit --globals vim _debugging _command_panel _flash_esc_or_noh _telescope_collections _toggle_lazygit --max-line-length 150 --no-config

nvim/.github/workflows/style_check.yml

@@ -0,0 +1,13 @@
+name: style check
+on: [push, pull_request]
+
+jobs:
+  stylua:
+    runs-on: ubuntu-latest
+    steps:
+      - uses: actions/checkout@v4
+      - uses: JohnnyMorganz/stylua-action@v4
+        with:
+          token: ${{ secrets.GITHUB_TOKEN }}
+          version: latest
+          args: --check --config-path=stylua.toml .

nvim/.github/workflows/update_flake.yml

@@ -0,0 +1,26 @@
+name: update flake.lock
+on:
+  # Scheduled update (1st of every month)
+  schedule: [{ cron: "30 02 1 * *" }]
+
+jobs:
+  update-lockfile:
+    if: github.repository_owner == 'ayamir'
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+      - uses: actions/checkout@v4
+      - uses: cachix/install-nix-action@v26
+        with:
+          nix_path: nixpkgs=channel:nixos-unstable
+      - name: Run flake-update
+        run: |
+          nix flake update
+      - uses: stefanzweifel/git-auto-commit-action@v5
+        with:
+          commit_message: "chore(lockfile): auto update flake.lock"
+          commit_user_name: "github-actions[bot]"
+          commit_user_email: "41898282+github-actions[bot]@users.noreply.github.com"
+          commit_author: "github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>"
+          file_pattern: "flake.lock"

nvim/.github/workflows/update_lockfile.yml

@@ -0,0 +1,41 @@
+name: update lockfile
+on:
+  # Scheduled update (each day)
+  schedule: [{ cron: "30 01 * * *" }]
+
+jobs:
+  update-lockfile:
+    if: github.repository_owner == 'ayamir'
+    runs-on: ubuntu-latest
+    permissions:
+      contents: write
+    steps:
+      - uses: actions/checkout@v4
+        with:
+          fetch-depth: 0 # Required to count the commits
+      - uses: andstor/file-existence-action@v3
+        id: check_lockfile
+        with:
+          files: "lazy-lock.json"
+      - name: Run count-new-commits
+        run: |
+          echo "NEW_COMMIT_COUNT=$(git log --oneline --since '24 hours ago' --perl-regexp --author='^((?!github-actions).*)$' | wc -l)" >> "$GITHUB_ENV"
+      - uses: rhysd/action-setup-vim@v1
+        if: ${{ steps.check_lockfile.outputs.files_exists == 'true' && env.NEW_COMMIT_COUNT > 0 }}
+        with:
+          neovim: true
+      - name: Run lockfile-autoupdate
+        if: ${{ steps.check_lockfile.outputs.files_exists == 'true' && env.NEW_COMMIT_COUNT > 0 }}
+        timeout-minutes: 5
+        run: |
+          ./scripts/install.sh
+          nvim --headless "+Lazy! update" +qa
+          cp -pv "${HOME}/.config/nvim/lazy-lock.json" .
+      - uses: stefanzweifel/git-auto-commit-action@v5
+        if: ${{ steps.check_lockfile.outputs.files_exists == 'true' && env.NEW_COMMIT_COUNT > 0 }}
+        with:
+          commit_message: "chore(lockfile): auto update lazy-lock.json"
+          commit_user_name: "github-actions[bot]"
+          commit_user_email: "41898282+github-actions[bot]@users.noreply.github.com"
+          commit_author: "github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>"
+          file_pattern: "lazy-lock.json"

nvim/.gitignore

@@ -0,0 +1,4 @@
+lua/modules/plugins/custom.lua
+lua/modules/configs/custom
+lua/user
+result

nvim/.nixd.json

@@ -0,0 +1,7 @@
+{
+    "formatting": {
+        "command": [
+            "nixpkgs-fmt"
+        ]
+    }
+}

nvim/LICENSE

@@ -0,0 +1,30 @@
+BSD 3-Clause License
+
+Copyright (c) 2021 ayamir
+Copyright (c) 2022 Jint-lzxy, CharlesChiuGit
+Copyright (c) 2023 aarnphm, misumisumi
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+1. Redistributions of source code must retain the above copyright notice, this
+   list of conditions and the following disclaimer.
+
+2. Redistributions in binary form must reproduce the above copyright notice,
+   this list of conditions and the following disclaimer in the documentation
+   and/or other materials provided with the distribution.
+
+3. Neither the name of the copyright holder nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
+FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

nvim/README.md

@@ -0,0 +1,216 @@
+<h1 align="center">
+    nvimdots
+    <br>
+    <a href="https://github.com/neovim/neovim/releases/tag/stable">
+    <img
+        alt="Neovim Version Capability"
+        src="https://img.shields.io/badge/Supports%20Nvim-v0.10-A6D895?style=for-the-badge&colorA=363A4F&logo=neovim&logoColor=D9E0EE">
+    </a>
+    <a href="https://github.com/ayamir/nvimdots/releases">
+    <img
+        alt="Release"
+        src="https://img.shields.io/github/v/release/ayamir/nvimdots.svg?style=for-the-badge&logo=github&color=F2CDCD&logoColor=D9E0EE&labelColor=363A4F">
+    </a>
+</h1>
+
+<p align="center">
+    <a href="https://github.com/ayamir/nvimdots/stargazers">
+    <img
+        alt="Stars"
+        src="https://img.shields.io/github/stars/ayamir/nvimdots?colorA=363A4F&colorB=B7BDF8&logo=adafruit&logoColor=D9E0EE&style=for-the-badge">
+    </a>
+    <a href="https://github.com/ayamir/nvimdots/issues">
+    <img
+        alt="Issues"
+        src="https://img.shields.io/github/issues-raw/ayamir/nvimdots?colorA=363A4f&colorB=F5A97F&logo=github&logoColor=D9E0EE&style=for-the-badge">
+    </a>
+    <a href="https://github.com/ayamir/nvimdots/contributors">
+    <img
+        alt="Contributors"
+        src="https://img.shields.io/github/contributors/ayamir/nvimdots?colorA=363A4F&colorB=B5E8E0&logo=git&logoColor=D9E0EE&style=for-the-badge">
+    </a>
+    <img
+        alt="Code Size"
+        src="https://img.shields.io/github/languages/code-size/ayamir/nvimdots?colorA=363A4F&colorB=DDB6F2&logo=gitlfs&logoColor=D9E0EE&style=for-the-badge">
+</p>
+
+## 🪷 Introduction
+
+This repo hosts our [Neovim](https://neovim.io/) configuration for Linux [(with NixOS support)](#nixos-support), macOS, and Windows. `init.lua` is the config entry point.
+
+Branch info:
+
+<div align="center">
+
+| Branch | Supported Neovim version |
+| :----: | :----------------------: |
+|  main  |     nvim 0.10 stable     |
+|  0.11  |    nvim 0.11 nightly     |
+|  0.9   |         nvim 0.9         |
+|  0.8   |         nvim 0.8         |
+
+</div>
+
+> [!IMPORTANT]
+> The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+
+We currently manage plugins using [lazy.nvim](https://github.com/folke/lazy.nvim).
+
+Chinese introduction is [here](https://zhuanlan.zhihu.com/p/382092667).
+
+### 🎐 Features
+
+- **Fast.** Less than **50ms** to start (Depends on SSD and CPU, tested on Zephyrus G14 2022 version).
+- **Simple.** Runs out of the box.
+- **Modern.** Pure `lua` config.
+- **Modular.** Easy to customize.
+- **Powerful.** Full functionality to code.
+
+## 🏗 How to Install
+
+Simply run the following interactive bootstrap command, and you should be all set 👍
+
+- **Windows** _(Note: This script REQUIRES `pwsh` > `v7.1`)_
+
+```pwsh
+Set-ExecutionPolicy Bypass -Scope Process -Force; Invoke-Expression ((New-Object System.Net.WebClient).DownloadString('https://raw.githubusercontent.com/ayamir/nvimdots/HEAD/scripts/install.ps1'))
+```
+
+- **\*nix**
+
+```sh
+if command -v curl >/dev/null 2>&1; then
+    bash -c "$(curl -fsSL https://raw.githubusercontent.com/ayamir/nvimdots/HEAD/scripts/install.sh)"
+else
+    bash -c "$(wget -O- https://raw.githubusercontent.com/ayamir/nvimdots/HEAD/scripts/install.sh)"
+fi
+```
+
+It's strongly recommended to read [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites) before starting, especially for \*nix users.
+
+## ⚙️ Configuration & Usage
+
+<h3 align="center">
+    🗺️ Keybindings
+</h3>
+<p align="center">See <a href="https://github.com/ayamir/nvimdots/wiki/Keybindings" rel="nofollow">Wiki: Keybindings</a> for details</p>
+<br>
+
+<h3 align="center">
+    🔌 Plugins & Deps
+</h3>
+<p align="center">See <a href="https://github.com/ayamir/nvimdots/wiki/Plugins" rel="nofollow">Wiki: Plugins</a> for details <br><em>(You can also find a deps diagram there!)</em></p>
+<br>
+
+<h3 align="center">
+    🔧 Usage & Customization
+</h3>
+<p align="center">See <a href="https://github.com/ayamir/nvimdots/wiki/Usage" rel="nofollow">Wiki: Usage</a> for details</p>
+<br>
+
+<h3 align="center" id="nixos-support" name="nixos-support">
+    ❄️  NixOS Support
+</h3>
+<p align="center">See <a href="https://github.com/ayamir/nvimdots/wiki/NixOS-Support" rel="nofollow">Wiki: NixOS Support</a> for details</p>
+<br>
+
+<h3 align="center">
+    🤔 FAQ
+</h3>
+<p align="center">See <a href="https://github.com/ayamir/nvimdots/wiki/Issues" rel="nofollow">Wiki: FAQ</a> for details</p>
+
+## ✨ Features
+
+<h3 align="center">
+    ⏱️  Startup Time
+</h3>
+
+<p align="center">
+  <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/startuptime.png"
+  width = "80%"
+  alt = "StartupTime"
+  />
+</p>
+
+<p align="center">
+  <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/vimstartup.png"
+  width = "60%"
+  alt = "Vim-StartupTime"
+  />
+</p>
+
+> Tested with [rhysd/vim-startuptime](https://github.com/rhysd/vim-startuptime)
+
+<h3 align="center">
+    📸 Screenshots
+</h3>
+
+<p align="center">
+    <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/dashboard.png" alt="Dashboard">
+    <em>Dashboard</em>
+</p>
+<br>
+
+<p align="center">
+    <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/telescope.png" alt="Telescope">
+    <em>Telescope</em>
+</p>
+<br>
+
+<p align="center">
+    <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/coding.png" alt="Coding">
+    <em>Coding</em>
+</p>
+<br>
+
+<p align="center">
+    <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/code_action.png" alt="Code Action">
+    <em>Code Action</em>
+</p>
+<br>
+
+<p align="center">
+    <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/dap.png" alt="Debugging">
+    <em>Debugging</em>
+</p>
+<br>
+
+<p align="center">
+    <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/lazygit.png" alt="Lazygit">
+    <em>Lazygit with built-in Terminal</em>
+</p>
+<br>
+
+<p align="center">
+    <img src="https://raw.githubusercontent.com/ayamir/blog-imgs/main/command_ref.png" alt="Command quickref">
+    <em>Command quickref</em>
+</p>
+
+## 👐 Contributing
+
+- If you find anything that needs improving, do not hesitate to point it out or create a PR.
+- If you come across an issue, you can first use `:checkhealth` command provided by nvim to trouble-shoot yourself.
+  - If you still have such problems, feel free to open a new issue!
+
+## ❤️ Thanks to
+
+- [ayamir](https://github.com/ayamir)
+- [Jint-lzxy](https://github.com/Jint-lzxy)
+- [CharlesChiuGit](https://github.com/CharlesChiuGit)
+- [aarnphm](https://github.com/aarnphm)
+- [misumisumi](https://github.com/misumisumi)
+
+## 🎉 Acknowledgement
+
+- [glepnir/nvim](https://github.com/glepnir/nvim)
+
+## 📜 License
+
+This Neovim configuration is released under the BSD 3-Clause license, which grants the following permissions:
+
+- Commercial use
+- Distribution
+- Modification
+- Private use
+
+For more convoluted language, see the [LICENSE](https://github.com/ayamir/nvimdots/blob/main/LICENSE).

nvim/flake.lock

@@ -0,0 +1,148 @@
+{
+  "nodes": {
+    "devshell": {
+      "inputs": {
+        "flake-utils": "flake-utils",
+        "nixpkgs": "nixpkgs"
+      },
+      "locked": {
+        "lastModified": 1717408969,
+        "narHash": "sha256-Q0OEFqe35fZbbRPPRdrjTUUChKVhhWXz3T9ZSKmaoVY=",
+        "owner": "numtide",
+        "repo": "devshell",
+        "rev": "1ebbe68d57457c8cae98145410b164b5477761f4",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "devshell",
+        "type": "github"
+      }
+    },
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib"
+      },
+      "locked": {
+        "lastModified": 1719745305,
+        "narHash": "sha256-xwgjVUpqSviudEkpQnioeez1Uo2wzrsMaJKJClh+Bls=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "c3c5ecc05edc7dafba779c6c1a61cd08ac6583e9",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
+    "flake-utils": {
+      "inputs": {
+        "systems": "systems"
+      },
+      "locked": {
+        "lastModified": 1701680307,
+        "narHash": "sha256-kAuep2h5ajznlPMD9rnQyffWG8EM/C73lejGofXvdM8=",
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "rev": "4022d587cbbfd70fe950c1e2083a02621806a725",
+        "type": "github"
+      },
+      "original": {
+        "owner": "numtide",
+        "repo": "flake-utils",
+        "type": "github"
+      }
+    },
+    "home-manager": {
+      "inputs": {
+        "nixpkgs": [
+          "nixpkgs"
+        ]
+      },
+      "locked": {
+        "lastModified": 1719677234,
+        "narHash": "sha256-qO9WZsj/0E6zcK4Ht1y/iJ8XfwbBzq7xdqhBh44OP/M=",
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "rev": "36317d4d38887f7629876b0e43c8d9593c5cc48d",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "home-manager",
+        "type": "github"
+      }
+    },
+    "nixpkgs": {
+      "locked": {
+        "lastModified": 1704161960,
+        "narHash": "sha256-QGua89Pmq+FBAro8NriTuoO/wNaUtugt29/qqA8zeeM=",
+        "owner": "NixOS",
+        "repo": "nixpkgs",
+        "rev": "63143ac2c9186be6d9da6035fa22620018c85932",
+        "type": "github"
+      },
+      "original": {
+        "owner": "NixOS",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "nixpkgs-lib": {
+      "locked": {
+        "lastModified": 1717284937,
+        "narHash": "sha256-lIbdfCsf8LMFloheeE6N31+BMIeixqyQWbSr2vk79EQ=",
+        "type": "tarball",
+        "url": "https://github.com/NixOS/nixpkgs/archive/eb9ceca17df2ea50a250b6b27f7bf6ab0186f198.tar.gz"
+      },
+      "original": {
+        "type": "tarball",
+        "url": "https://github.com/NixOS/nixpkgs/archive/eb9ceca17df2ea50a250b6b27f7bf6ab0186f198.tar.gz"
+      }
+    },
+    "nixpkgs_2": {
+      "locked": {
+        "lastModified": 1719468428,
+        "narHash": "sha256-vN5xJAZ4UGREEglh3lfbbkIj+MPEYMuqewMn4atZFaQ=",
+        "owner": "nixos",
+        "repo": "nixpkgs",
+        "rev": "1e3deb3d8a86a870d925760db1a5adecc64d329d",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nixos",
+        "ref": "nixpkgs-unstable",
+        "repo": "nixpkgs",
+        "type": "github"
+      }
+    },
+    "root": {
+      "inputs": {
+        "devshell": "devshell",
+        "flake-parts": "flake-parts",
+        "home-manager": "home-manager",
+        "nixpkgs": "nixpkgs_2"
+      }
+    },
+    "systems": {
+      "locked": {
+        "lastModified": 1681028828,
+        "narHash": "sha256-Vy1rq5AaRuLzOxct8nz4T6wlgyUR7zLU309k9mBC768=",
+        "owner": "nix-systems",
+        "repo": "default",
+        "rev": "da67096a3b9bf56a91d16901293e51ba5b49a27e",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-systems",
+        "repo": "default",
+        "type": "github"
+      }
+    }
+  },
+  "root": "root",
+  "version": 7
+}

nvim/flake.nix

@@ -0,0 +1,105 @@
+{
+  # This provides only NixOS module
+  # As of 2023/08/19, you need to depend on nixpkgs-unstable.
+  # because "doq" is not included in the stable version.
+  description = "Provide nixosModules for ayamir/nvimdots";
+
+  inputs = {
+    flake-parts.url = "github:hercules-ci/flake-parts";
+    devshell.url = "github:numtide/devshell";
+    nixpkgs.url = "github:nixos/nixpkgs/nixpkgs-unstable";
+    home-manager = {
+      url = "github:nix-community/home-manager";
+      inputs.nixpkgs.follows = "nixpkgs";
+    };
+  };
+
+  outputs = inputs @ { self, flake-parts, ... }:
+    flake-parts.lib.mkFlake { inherit inputs; }
+      {
+        imports = [
+          inputs.devshell.flakeModule
+        ];
+        flake = {
+          homeManagerModules = {
+            nvimdots = ./nixos;
+          };
+        };
+        systems = [ "x86_64-linux" "aarch64-linux" "x86_64-darwin" "aarch64-darwin" ];
+        perSystem = { pkgs, system, ... }: {
+          packages = {
+            testEnv = (import ./nixos/testEnv.nix { inherit inputs pkgs; }).activationPackage;
+            check-linker = pkgs.writeShellApplication {
+              name = "check-linker";
+              text =
+                let
+                  ldd_cmd = if pkgs.stdenv.isDarwin then "xcrun otool -L" else "${pkgs.glibc.bin}/bin/ldd";
+                in
+                ''
+                  #shellcheck disable=SC1090
+                  source <(sed -ne :1 -e 'N;1,1b1' -e 'P;D' "${self.packages.${system}.testEnv}/home-path/bin/nvim")
+                  echo "Checking files under ''${XDG_DATA_HOME}/''${NVIM_APPNAME:-nvim}/mason/bin..."
+                  find "''${XDG_DATA_HOME}/''${NVIM_APPNAME:-nvim}/mason/bin" -type l | while read -r link; do
+                    "${ldd_cmd}" "$(readlink -f "$link")" > /dev/zero 2>&1 || continue
+                    linkers=$("${ldd_cmd}" "$(readlink -f "$link")" | tail -n+2)
+                    echo "$linkers" | while read -r line; do
+                      [ -z "$line" ] && continue
+                      echo "$line" | grep -q "/nix/store" || printf '%s: %s does not link to /nix/store \n' "$(basename "$link")" "$line"
+                    done
+                  done
+                  echo "*** Done ***"
+                '';
+            };
+          };
+          devshells.default = {
+            commands = [
+              {
+                help = "neovim linked to testEnv.";
+                name = "nvim";
+                command = ''
+                  ${self.packages.${system}.testEnv}/home-path/bin/nvim
+                '';
+              }
+              {
+                help = "check-linker";
+                package = self.packages.${system}.check-linker;
+              }
+            ];
+            devshell = {
+              motd = ''
+                {202}🔨 Welcome to devshell{reset}
+                Symlink configs to "''${XDG_CONFIG_HOME}"/nvimdots!
+                And NVIM_APPNAME=nvimdots is already configured, so neovim will put files under "\$XDG_xxx_HOME"/nvimdots.
+                To uninstall, remove "\$XDG_xxx_HOME"/nvimdots.
+
+                $(type -p menu &>/dev/null && menu)
+              '';
+              startup = {
+                mkNvimDir = {
+                  text = ''
+                    mkdir -p "''${XDG_CONFIG_HOME}"/nvimdots
+                    for path in lazy-lock.json init.lua lua snips tutor; do
+                      ln -sf "''${PWD}/''${path}" "''${XDG_CONFIG_HOME}"/nvimdots/
+                    done
+                  '';
+                };
+              };
+            };
+            env = [
+              {
+                name = "NVIM_APPNAME";
+                value = "nvimdots";
+              }
+              {
+                name = "PATH";
+                prefix = "${self.packages.${system}.testEnv}/home-path/bin";
+              }
+            ];
+            packages = with pkgs; [
+              nixd
+              nixpkgs-fmt
+            ];
+          };
+        };
+      };
+}