Merge branch 'zshfish' into dev

merge hidpi support

.install/cleanup.sh

@@ -13,24 +13,6 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
-# Check for running NetworkManager.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
-    echo ":: NetworkManager.service already running."
-else
-    sudo systemctl enable NetworkManager.service
-    sudo systemctl start NetworkManager.service
-    echo ":: NetworkManager.service activated successfully."    
-fi
-
-# Check for running bluetooth.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
-    echo ":: bluetooth.service already running."
-else
-    sudo systemctl enable bluetooth.service
-    sudo systemctl start bluetooth.service
-    echo ":: bluetooth.service activated successfully."    
-fi
-
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/fish.sh

@@ -0,0 +1,6 @@
+# ------------------------------------------------------
+# install fish
+# ------------------------------------------------------
+packagesPacman=("fish");
+packagesYay=();
+source .install/install-packages.sh

.install/hidpi.sh

@@ -0,0 +1,17 @@
+
+# ------------------------------------------------------
+# hidpi support
+# ------------------------------------------------------
+
+echo -e "${GREEN}"
+figlet "hidpi"
+echo -e "${NONE}"
+
+hidpiconfirm="Do you want 2x hidpi scale?"
+if gum confirm "$hidpiconfirm"; then
+    sed -i -E 's/size = [0-9]+(\.[0-9]+)?/size = 16/' ~/dotfiles-versions/$version/alacritty/alacritty.toml
+    sed -i -E 's/[0-9]+(\.[0-9]+)?/16/' ~/dotfiles-versions/$version/.settings/rofi-font.rasi
+    echo -e '\n\n# hidpi scale\nsource = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/conf/custom.conf
+    sed -i -E 's/1/2/' ~/dotfiles-versions/$version/hypr/conf/monitors/default.conf
+    echo ":: finished hidpi patch."
+fi

.install/hyprland-dotfiles.sh

@@ -5,6 +5,9 @@
 if [ -d ~/dotfiles-versions/$version/alacritty ]; then
     _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/kitty ]; then
+    _installSymLink kitty ~/.config/kitty ~/dotfiles/kitty/ ~/.config
+fi
 if [ -d ~/dotfiles-versions/$version/vim ]; then
     _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
 fi
@@ -37,11 +40,17 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/eww ]; then
+if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink eww ~/.config/eww ~/dotfiles/eww/ ~/.config
 fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
     _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
 fi
+if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
+    _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
+fi
+if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
+    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors
+fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -1,65 +1,57 @@
 packagesPacman=(
     "pacman-contrib"
     "vim"
-    "bluez"
+    "bat"
-    "bluez-utils"
+    "fzf"
+    "zsh"
+    "fastfetch"
+    "ranger"
+    "btop"
     "neovim"
     "wget"
     "unzip"
     "alacritty"
-    "chromium" 
     "dunst"
     "starship"
     "mpv"
     "thunar"
     "nautilus"
-    "mousepad"
     "noto-fonts"
     "otf-font-awesome"
     "ttf-fira-sans"
     "ttf-fira-code"
     "ttf-firacode-nerd"
+    "ttf-firacode-nerd"
     "figlet"
     "vlc"
     "eza"
     "python-pip"
     "python-psutil"
     "python-rich"
-    "python-click" 
     "python-pywal"
-    "python-gobject"
     "pavucontrol"
     "tumbler"
     "papirus-icon-theme"
-    "breeze-icons"
-    "polkit-gnome"
-    "brightnessctl"
     "gum"
     "man-pages"
-    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
     "xdg-desktop-portal-gtk"
-    "networkmanager"
-    "network-manager-applet"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
-    "gtk4"
-    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
-    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
-    "blueman"
 );
 
 packagesYay=(
-    "bibata-cursor-theme" 
+    "vimix-cursors"
+    "orchis-theme"
     "trizen"
-    "pacseek"
+    "google-chrome"
 );

.install/packages/hyprland-packages.sh

@@ -9,9 +9,11 @@ packagesPacman=(
     "slurp"
     "swappy"
     "cliphist"
+    "kitty"
 );
 
 packagesYay=(
+    "pyprland"
     "wlogout"
     "nwg-look"
     "eww"

.install/qtile-dotfiles.sh

@@ -35,4 +35,7 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
+    _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
+fi
 echo ":: Symbolic links created."

.install/restore.sh

@@ -14,6 +14,14 @@ _showRestoreOptions() {
         restorelist+="~/dotfiles/.bashrc "
         selectedlist+="~/dotfiles/.bashrc,"
     fi
+    if [ -f ~/dotfiles/.zshrc ]; then
+        restorelist+="~/dotfiles/.zshrc "
+        selectedlist+="~/dotfiles/.zshrc,"
+    fi
+    if [ -f ~/dotfiles/.p10k.zsh ]; then
+        restorelist+="~/dotfiles/.p10k.zsh "
+        selectedlist+="~/dotfiles/.p10k.zsh,"
+    fi
     if [ -d ~/dotfiles/.settings ]; then
         restorelist+="~/dotfiles/.settings "
         selectedlist+="~/dotfiles/.settings,"

.install/templates/keyboard-default.conf

@@ -28,7 +28,3 @@ input {
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
-
-gestures {
-    workspace_swipe = true
-}

.install/templates/keyboard-laptop.conf

@@ -22,14 +22,9 @@ input {
         # natural_scroll = false
 
         # for laptop
-        natural_scroll = true
+        natural_scroll = yes
         middle_button_emulation = true
-        clickfinger_behavior = true
+        clickfinger_behavior = 1  
-        disable_while_typing = true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
-
-gestures {
-    workspace_swipe = true
-}

.install/wallpaper.sh

@@ -5,16 +5,17 @@ echo -e "${GREEN}"
 figlet "Wallpapers"
 echo -e "${NONE}"
 if [ ! -d ~/wallpaper ]; then
-    echo "Do you want to download the wallpapers from repository https://gitlab.com/stephan-raabe/wallpaper/ ?"
+    echo "Do you want to download the wallpapers from repository https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ?"
     echo "If not, the script will install 3 default wallpapers in ~/wallpaper/"
     echo ""
     if gum confirm "Do you want to download the repository?" ;then
-        wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
+        # wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
-        unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
+        # unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
-        if [ ! -d ~/wallpaper/ ]; then
+        # if [ ! -d ~/wallpaper/ ]; then
-            mkdir ~/wallpaper
+        #     mkdir ~/wallpaper
-        fi
+        # fi
-        cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        # cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        git clone https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ~/wallpaper
         echo "Wallpapers from the repository installed successfully."
     elif [ $? -eq 130 ]; then
         exit 130

.install/zsh.sh

@@ -0,0 +1,19 @@
+# ------------------------------------------------------
+# install zsh and zinit
+# ------------------------------------------------------
+packagesPacman=("zsh");
+
+echo "Please select the zsh plugin manager:"
+zsh_manager=$(gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "oh my zsh" "zinit")
+if [[ "${zsh_manager}" == *"oh my zsh"* ]]; then
+    source .install/install-packages.sh
+    RUNZSH=no CHSH=no sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
+	git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
+	git clone https://github.com/zdharma-continuum/fast-syntax-highlighting.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/fast-syntax-highlighting
+	_installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_ohmyzsh ~/.zshrc
+else
+    packagesYay=("zinit");
+	source .install/install-packages.sh
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_zinit ~/.zshrc
+fi
+_installSymLink p10k ~/.p10k.zsh ~/dotfiles/.p10k.zsh ~/

.install/zshfish.sh

@@ -0,0 +1,25 @@
+# ------------------------------------------------------
+# Select additional shell
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "Zsh Fish"
+echo -e "${NONE}"
+echo "Please select if you want to install zsh or fish."
+echo
+zshfish=$(gum choose --no-limit --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "zsh" "fish")
+
+if [ -z "${zshfish}" ] ;then
+    echo ":: No shell selected. Keep using bash."
+else
+    echo "Please select your default shell."
+	echo
+	shell=$(echo -e "bash\n$zshfish" | gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) ")
+    if [[ $zshfish == *"zsh"* ]]; then
+		echo ":: zsh selected"
+		source .install/zsh.sh
+	fi
+	if [[ $zshfish == *"fish"* ]]; then
+		echo ":: fish selected"
+		source .install/fish.sh
+	fi
+fi

.settings/browser.sh

@@ -1 +1 @@
-chromium
+google-chrome-stable

.settings/editor.sh

@@ -1 +1 @@
-mousepad
+~/dotfiles/.settings/terminal.sh -e vim

.settings/networkmanager.sh

@@ -1 +0,0 @@
-nm-connection-editor

.settings/rofi-border-radius.rasi

@@ -0,0 +1,3 @@
+* {
+    border-radius:  15px;
+}

.settings/rofi-border.rasi

@@ -1,4 +1,3 @@
 * {
     border-width:   2px;
-    border-radius:  15px;
 }

.settings/software.sh

@@ -1 +0,0 @@
-alacritty -e pacseek

.version/name

@@ -1 +1 @@
-2.9.1.2
+2.9.1.1

.version/version

@@ -1 +1 @@
-2912
+2911

.zshrc_ohmyzsh

@@ -0,0 +1,80 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# -----------------------------------------------------
+# Oh my zsh settings
+# -----------------------------------------------------
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# ZSH_THEME="robbyrussell"
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+zstyle ':omz:update' mode auto
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+COMPLETION_WAITING_DOTS="true"
+
+# -----------------------------------------------------
+# Plugins
+# -----------------------------------------------------
+plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# -----------------------------------------------------
+# Variables
+# -----------------------------------------------------
+export PATH=$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+# export MANPATH="/usr/local/man:$MANPATH"
+
+export LANG=en_US.UTF-8
+
+export EDITOR='vim'
+
+export MAKEFLAGS='-j$(nproc)'
+export CFLAGS='-march=native -O2 -pipe'
+
+# -----------------------------------------------------
+# Alias
+# -----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias ls="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+# fix ssh if in kitty
+[ "$TERM" = "xterm-kitty" ] && alias ssh="kitty +kitten ssh"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh
+
+# -----------------------------------------------------
+# miscs
+# -----------------------------------------------------
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.zshrc_zinit

@@ -0,0 +1,62 @@
+# ---------------------------------------------------
+# Zinit and plugins
+# ---------------------------------------------------
+source /usr/share/zinit/zinit.zsh
+
+# Load powerlevel10k theme
+zinit ice depth"1" # git clone depth
+zinit light romkatv/powerlevel10k
+
+# Load plugins
+zinit light zsh-users/zsh-autosuggestions
+zinit light zdharma-continuum/fast-syntax-highlighting
+# oh-my-zsh plugins
+zi snippet OMZL::git.zsh
+zi snippet OMZP::git
+zi snippet OMZP::sudo
+zi snippet OMZP::colored-man-pages
+zi snippet OMZP::eza
+zi snippet OMZP::z
+# others
+zplugin ice as"program" pick"bin/git-dsf"
+zplugin light zdharma-continuum/zsh-diff-so-fancy
+
+# ----------------------------------------------------
+# Variables
+# ----------------------------------------------------
+export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+export EDITOR=vim
+
+# ----------------------------------------------------
+# Alias
+# ----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias eza="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# Miscs
+# -----------------------------------------------------
+# fix ssh if in kitty
+[ "$TERM" = "xterm-kitty" ] && alias ssh="kitty +kitten ssh"
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh

CHANGELOG.md

@@ -1,11 +1,3 @@
-Version 2.9.1.2
-https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
---------------------------------------------------------
-- Workspaces module in waybar updated to enable scroll to change the workspace https://gitlab.com/stephan-raabe/dotfiles/-/merge_requests/114
-- More functions deactivated in Game Mode (SUPER+ALT+G)
-- Keybindings rofi menu updated with keybinding description. Open with right mouse click on Apps waybar module
-- Fixed bug of ML4W Hyprland Settings App with Hyprland 0.41.0
-
 Version 2.9.1.1
 https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
 --------------------------------------------------------

README.md

@@ -1,4 +1,4 @@
-# ML4W Dotfiles 2.9.1.2
+# ML4W Dotfiles 2.9.1.1
 
 An advanced configuration of Hyprland for Arch Linux based distributions. This package includes an installation script to install and setup the required components.
 
@@ -55,8 +55,6 @@ THANK YOU very much for all your support, contributions and ideas:
 - Don Williams: https://github.com/dwilliam62
 - Teodor Orzechowski: https://gitlab.com/sq6gtt
 - Jamie Deppeler: https://gitlab.com/bknight2k
-- Yingjie Wang: https://gitlab.com/GaugeAndGravity
-- Daniel Gerber: https://gitlab.com/dan.john.gerber
 - https://gitlab.com/muee
 
 and many more...

Vimix-hyprcursors/manifest.hl

@@ -0,0 +1,4 @@
+name = Extracted Theme
+description = Automatically extracted with hyprcursor-util
+version = 0.1
+cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -1,5 +1,5 @@
 [font]
-size = 12.0
+size = 16.0
 
 [font.normal]
 family = "FiraCode Nerd Font"
@@ -11,3 +11,6 @@ opacity = 0.7
 [window.padding]
 x = 15
 y = 15
+
+[selection]
+save_to_clipboard = true

chrome-flags.conf

@@ -0,0 +1 @@
+--ozone-platform=wayland --enable-wayland-ime

fastfetch/config.jsonc

@@ -1,110 +1,165 @@
-//  Thanks to Bina
+// Note that you must replace the image path to an existing image to display it.
+
 {
     "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-  "logo": {
+    // "logo": {
-      "padding": {
+    //     "type": "iterm",
-      "top": 2
+    //     "source": "/Users/carter/Desktop/apple1.png",
-      }
+    //     "width": 28,
-  },
+    //     "height": 12
+    // },
     "display": {
-        "separator": " ➜  "
+    //    "separator": "  "
+        "separator": " "
     },
     "modules": [
-      "break",
-      "break",
-      "break",
-       {
-          "type": "os",
-          "key": "OS   ",
-          "keyColor": "31",  // = color1
-      },
-      {
-          "type": "kernel",
-          "key": " ├  ",
-          "keyColor": "31",
-      },
-      {
-          "type": "packages",
-          "format": "{} (pacman)",
-          "key": " ├ 󰏖 ",
-          "keyColor": "31",  
-      },
-      {
-          "type": "shell",
-          "key": " └  ",
-          "keyColor": "31", 
-      },
-      "break",
-      {
-          "type": "wm",
-          "key": "WM   ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "wmtheme",
-          "key": " ├ 󰉼 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "icons",
-          "key": " ├ 󰀻 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "cursor",
-          "key": " ├  ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "terminal",
-          "key": " ├  ",
-          "keyColor": "32",
-      },
-      {
-          "type": "terminalfont",
-          "key": " └  ",
-          "keyColor": "32", 
-      },
-      "break",
         {
             "type": "host",
-          "format": "{5} {1} Type {2}",
+            "key": "╭─󰌢",
-          "key": "PC   ",
+            "keyColor": "green"
-          "keyColor": "33",
         },
         {
             "type": "cpu",
-          "format": "{1} ({3}) @ {7} GHz",
+            "key": "├─󰻠",
-          "key": " ├  ",
+            "keyColor": "green"
-          "keyColor": "33",
         },
         {
             "type": "gpu",
-          "format": "{1} {2} @ {12} GHz",            
+            "key": "├─󰍛",
-          "key": " ├ 󰢮 ",
+            "keyColor": "green"
-          "keyColor": "33",
-      },
-      {
-          "type": "memory",
-          "key": " ├  ",
-          "keyColor": "33",
-      },
-      {
-          "type": "swap",
-          "key": " ├ 󰓡 ",
-          "keyColor": "33",
         },
         {
             "type": "disk",
-          "key": " ├ 󰋊 ",
+            "key": "├─",
-          "keyColor": "33",
+            "keyColor": "green"
         },
         {
-          "type": "monitor",
+            "type": "memory",
-          "key": " └  ",
+            "key": "├─󰑭",
-          "keyColor": "33",
+            "keyColor": "green"
+        },
+        {
+            "type": "swap",
+            "key": "├─󰓡",
+            "keyColor": "green"
+        },
+        {
+            "type": "display",
+            "key": "├─󰍹",
+            "keyColor": "green"
+        },
+        {
+            "type": "battery",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "poweradapter",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "gamepad",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "bluetooth",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "sound",
+            "key": "╰─",
+            "keyColor": "green"
         },
         "break",
+
+        {
+            "type": "shell",
+            "key": "╭─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminal",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminalfont",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "lm",
+            "key": "├─󰧨",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "de",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "wm",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "theme",
+            "key": "├─󰉼",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "icons",
+            "key": "╰─󰀻",
+            "keyColor": "yellow"
+        },
+
         "break",
+        {
+            "type": "title",
+            "key": "╭─",
+            "format": "{1}@{2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "os",
+            "key": "├─󰣇", // Just get your distro's logo off nerdfonts.com
+            "keyColor": "blue"
+        },
+        {
+            "type": "kernel",
+            "key": "├─",
+            "format": "{1} {2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "packages",
+            "key": "├─󰏖",
+            "keyColor": "blue"
+        },
+        {
+            "type": "uptime",
+            "key": "├─󰅐",
+            "keyColor": "blue"
+        },
+        {
+            "type": "media",
+            "key": "├─󰝚",
+            "keyColor": "blue"
+        },
+        {
+            "type": "localip",
+            "key": "╰─󰩟",
+            "compact": true,
+            "keyColor": "blue"
+        },
+        "break",
+        {
+            "type": "custom",
+            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻"
+        }
     ]
 }
+

hypr/conf/animation.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/animations/animation-moving.conf
+source = ~/dotfiles/hypr/conf/animations/animations-high.conf

hypr/conf/autostart.conf

@@ -29,8 +29,8 @@ exec-once = ~/dotfiles/hypr/scripts/ml4w-welcome-autostart.sh
 # Start ewww daemon
 exec-once = ~/dotfiles/hypr/scripts/eww.sh
 
+exec-once = pypr
+
+
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
-
-# Load configuration from ML4W Hyprland Settings App
-exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1 +1 @@
-exec-once = hyprctl setcursor Bibata-Modern-Ice 24
+exec-once = hyprctl setcursor Vimix 24

hypr/conf/fcitx5.conf

@@ -3,5 +3,3 @@ exec-once = fcitx5 -d --replace
 exec-once = fcitx5-remote -r
 
 bind=$mainMod CTRL, E, exec, pkill fcitx5 -9;sleep 1;fcitx5 -d --replace; sleep 1;fcitx5-remote -r
-
-env=QT_IM_MODULE,fcitx

hypr/conf/hidpi.conf

@@ -0,0 +1,6 @@
+xwayland {
+  force_zero_scaling = true
+}
+
+env = GDK_SCALE,2
+env = QT_SCALE_FACTOR=2

hypr/conf/keybindings/custom.conf

@@ -9,7 +9,7 @@ $mainMod = SUPER
 # Applications
 bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
 bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
-bind = $mainMod, period, exec, emote
+bind = $mainMod SHIFT, E, exec, emote
 
 # Windows
 bind = $mainMod, Q, killactive
@@ -35,15 +35,18 @@ bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
 bind = $mainMod CTRL, Q, exec, wlogout
 bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
 bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
+bind = $mainMod, SPACE, exec, rofi -show drun -replace -i
 bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
 bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
 bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
-bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
 bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
 bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
+bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
 bind = $mainMod, 1, workspace, 1
@@ -92,3 +95,6 @@ bind = $mainMod, P, submap, passthru
 submap = passthru
 bind = SUPER, Escape, submap, reset
 submap = reset
+
+# Pyprland
+bind = $mainMod SHIFT, RETURN, exec, pypr toggle term

hypr/conf/keybindings/default.conf

@@ -7,88 +7,89 @@
 $mainMod = SUPER
 
 # Applications
-bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh # Open the terminal
+bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
-bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh # Open the browser
+bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
-bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh # Open the filemanager
 
 # Windows
-bind = $mainMod, Q, killactive # Kill active window
+bind = $mainMod, Q, killactive
-bind = $mainMod, F, fullscreen # Set active window to fullscreen
+bind = $mainMod, F, fullscreen
-bind = $mainMod, T, togglefloating # Toggle active windows into floating mode
+bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
-bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh # Toggle all windows into floating mode
+bind = $mainMod, T, togglefloating
-bind = $mainMod, J, togglesplit # Toggle split
+bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
-bind = $mainMod, left, movefocus, l # Move focus left
+bind = $mainMod, J, togglesplit
-bind = $mainMod, right, movefocus, r # Move focus right
+bind = $mainMod, left, movefocus, l
-bind = $mainMod, up, movefocus, u # Move focus up
+bind = $mainMod, right, movefocus, r
-bind = $mainMod, down, movefocus, d # Move focus down
+bind = $mainMod, up, movefocus, u
-bindm = $mainMod, mouse:272, movewindow # Move window with the mouse
+bind = $mainMod, down, movefocus, d
-bindm = $mainMod, mouse:273, resizewindow # Resize window with the mouse
+bindm = $mainMod, mouse:272, movewindow
-bind = $mainMod SHIFT, right, resizeactive, 100 0 # Increase window width with keyboard
+bindm = $mainMod, mouse:273, resizewindow
-bind = $mainMod SHIFT, left, resizeactive, -100 0 # Reduce window width with keyboard
+bind = $mainMod SHIFT, right, resizeactive, 100 0
-bind = $mainMod SHIFT, down, resizeactive, 0 100 # Increase window height with keyboard
+bind = $mainMod SHIFT, left, resizeactive, -100 0
-bind = $mainMod SHIFT, up, resizeactive, 0 -100 # Reduce window height with keyboard
+bind = $mainMod SHIFT, up, resizeactive, 0 -100
-bind = $mainMod, G, togglegroup # Toggle window group
+bind = $mainMod SHIFT, down, resizeactive, 0 100
+bind = $mainMod, G, togglegroup
 
 # Actions
-bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh # Toggle animations
+bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh
-bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh # Take a screenshot
+bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
-bind = $mainMod CTRL, Q, exec, wlogout # Start wlogout
+bind = $mainMod CTRL, Q, exec, wlogout
-bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh # Change the wallpaper
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
-bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select # Open wallpaper selector
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i # Open application launcher
+bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
-bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh # Show keybindings
+bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
-bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh # Reload waybar
+bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
-bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh # Toggle waybar
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
-bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh # Reload hyprland config
+bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
-bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh # Open clipboard manager
+bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
-bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh # Open waybar theme switcher
+bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
-bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
+bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
-bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh # Toggle screenshader
+bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
-bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh # Toggle game mode
+bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
-bind = $mainMod, 1, workspace, 1 # Open workspace 1
+bind = $mainMod, 1, workspace, 1
-bind = $mainMod, 2, workspace, 2 # Open workspace 2
+bind = $mainMod, 2, workspace, 2
-bind = $mainMod, 3, workspace, 3 # Open workspace 3
+bind = $mainMod, 3, workspace, 3
-bind = $mainMod, 4, workspace, 4 # Open workspace 4
+bind = $mainMod, 4, workspace, 4
-bind = $mainMod, 5, workspace, 5 # Open workspace 5
+bind = $mainMod, 5, workspace, 5
-bind = $mainMod, 6, workspace, 6 # Open workspace 6
+bind = $mainMod, 6, workspace, 6
-bind = $mainMod, 7, workspace, 7 # Open workspace 7
+bind = $mainMod, 7, workspace, 7
-bind = $mainMod, 8, workspace, 8 # Open workspace 8
+bind = $mainMod, 8, workspace, 8
-bind = $mainMod, 9, workspace, 9 # Open workspace 9
+bind = $mainMod, 9, workspace, 9
-bind = $mainMod, 0, workspace, 10 # Open workspace 10
+bind = $mainMod, 0, workspace, 10
-bind = $mainMod SHIFT, 1, movetoworkspace, 1 # Move active window to workspace 1
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
-bind = $mainMod SHIFT, 2, movetoworkspace, 2 # Move active window to workspace 2
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
-bind = $mainMod SHIFT, 3, movetoworkspace, 3 # Move active window to workspace 3
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
-bind = $mainMod SHIFT, 4, movetoworkspace, 4 # Move active window to workspace 4
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
-bind = $mainMod SHIFT, 5, movetoworkspace, 5 # Move active window to workspace 5
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
-bind = $mainMod SHIFT, 6, movetoworkspace, 6 # Move active window to workspace 6
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
-bind = $mainMod SHIFT, 7, movetoworkspace, 7 # Move active window to workspace 7
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
-bind = $mainMod SHIFT, 8, movetoworkspace, 8 # Move active window to workspace 8
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
-bind = $mainMod SHIFT, 9, movetoworkspace, 9 # Move active window to workspace 9
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
-bind = $mainMod SHIFT, 0, movetoworkspace, 10 # Move active window to workspace 10
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
-bind = $mainMod, mouse_down, workspace, e+1 # Open next workspace
+bind = $mainMod, mouse_down, workspace, e+1
-bind = $mainMod, mouse_up, workspace, e-1 # Open previous workspace
+bind = $mainMod, mouse_up, workspace, e-1
-bind = $mainMod CTRL, down, workspace, empty # Open the next empty workspace
+bind = $mainMod CTRL, down, workspace, empty
-
-# Passthrough SUPER KEY to Virtual Machine
-bind = $mainMod, P, submap, passthru # Passthrough SUPER key to virtual machine
-submap = passthru
-bind = SUPER, Escape, submap, reset # Get SUPER key back from virtual machine
-submap = reset
 
 # Fn keys
-bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10% # Increase brightness by 10%
+bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10%
-bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%- # Reduce brightness by 10%
+bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%-
-bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5% # Increase volume by 5%
+bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5%
-bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5% # Reduce volume by 5%
+bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5%
-bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle # Toggle mute
+bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
-bind = , XF86AudioPlay, exec, playerctl play-pause # Audio play pause
+bind = , XF86AudioPlay, exec, playerctl play-pause
-bind = , XF86AudioPause, exec, playerctl pause # Audio pause
+bind = , XF86AudioPause, exec, playerctl pause
-bind = , XF86AudioNext, exec, playerctl next # Audio next
+bind = , XF86AudioNext, exec, playerctl next
-bind = , XF86AudioPrev, exec, playerctl previous # Audio previous
+bind = , XF86AudioPrev, exec, playerctl previous
-bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle # Toggle microphone
+bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle
-bind = , XF86Calculator, exec, qalculate-gtk # Open calculator
+bind = , XF86Calculator, exec, qalculate-gtk
-bind = , XF86Lock, exec, hyprlock # Open screenlock
+bind = , XF86Lock, exec, hyprlock
-bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
+bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/hypr/settings/settings.sh
 
+# Passthrough SUPER KEY to Virtual Machine
+bind = $mainMod, P, submap, passthru
+submap = passthru
+bind = SUPER, Escape, submap, reset
+submap = reset

hypr/conf/keyboard.conf

@@ -3,7 +3,7 @@
 # https://wiki.hyprland.org/Configuring/Variables/#input
 # -----------------------------------------------------
 input {
-    kb_layout = de
+    kb_layout = us
     kb_variant =
     kb_model =
     kb_options =
@@ -11,7 +11,9 @@ input {
     follow_mouse = 1
     mouse_refocus=false
     touchpad {
-        natural_scroll = false
+        natural_scroll = true
+        disable_while_typing=true
+        tap-to-click=true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }

hypr/conf/layouts/laptop.conf

@@ -13,4 +13,11 @@ master {
 
 gestures {
   workspace_swipe=true
+  workspace_swipe_fingers=3
+  workspace_swipe_distance=400
+  workspace_swipe_invert=true
+  workspace_swipe_min_speed_to_force=30
+  workspace_swipe_cancel_ratio=0.5
+  workspace_swipe_create_new=true
+  workspace_swipe_forever=true
 }

hypr/conf/misc.conf

@@ -5,4 +5,6 @@
 misc {
     disable_hyprland_logo = true
     disable_splash_rendering = true
+    enable_swallow = true
+    swallow_regex = ^(Alacritty)$
 }

hypr/conf/ml4w.conf

@@ -22,9 +22,9 @@ windowrulev2 = float,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = size 400 500,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = move 10% 20%,class:(ml4w-dotfiles-settings.py)
 
-windowrulev2 = float,class:(com.ml4w.hyprland.settings)
+windowrulev2 = float,class:(com.ml4w.hyprlandsettings)
-windowrulev2 = size 700 600,class:(com.ml4w.hyprland.settings)
+windowrulev2 = size 700 600,class:(com.ml4w.hyprlandsettings)
-windowrulev2 = center,class:(com.ml4w.hyprland.settings)
+windowrulev2 = center,class:(com.ml4w.hyprlandsettings)
 
 windowrulev2 = float,class:(ml4w-hyprland-settings.py)
 windowrulev2 = size 700 600,class:(ml4w-hyprland-settings.py)
@@ -37,3 +37,4 @@ windowrulev2 = center,class:(dotfiles-floating)
 env = APPIMAGELAUNCHER_DISABLE,1
 env = XCURSOR_SIZE,24
 env = XDG_CURRENT_DESKTOP,Hyprland
+

hypr/conf/monitors/4k.conf

@@ -0,0 +1,6 @@
+# ----------------------------------------------------- 
+# Monitor Setup
+# name: "Default"
+# ----------------------------------------------------- 
+
+monitor=,preferred,auto,2

hypr/conf/monitors/dual.conf

@@ -4,4 +4,7 @@
 # ----------------------------------------------------- 
 
 monitor=DP-1,preferred,0x0,2
-monitor=HDMI-A-1,3840x2160,1920x-180,2,transform,1
+monitor=HDMI-A-1,3840x2160,1920x-275,2,transform,1
+
+workspace=1,monitor:DP-1
+exec-once=hyprctl dispatch workspace 1

hypr/conf/windowrules/custom.conf

@@ -16,3 +16,4 @@ layerrule = blur, logout_dialog
 
 windowrule = float,title=^(Mathematica)$
 windowrule = opacity 0.75, ^(Code)$
+windowrule = float,^(QQ)$

hypr/pyprland.toml

@@ -0,0 +1,12 @@
+[pyprland]
+
+plugins = [
+  "scratchpads",
+  "magnify",
+]
+
+[scratchpads.term]
+animation = "fromTop"
+command = "kitty --class kitty-dropterm"
+class = "kitty-dropterm"
+size = "75% 60%"

hypr/scripts/gamemode.sh

@@ -7,18 +7,13 @@
 #
 
 if [ -f ~/.cache/gamemode ] ;then
-    hyprctl reload
+    hyprctl keyword animations:enabled true
+    hyprctl keyword decoration:blur:enabled true
     rm ~/.cache/gamemode
     notify-send "Gamemode deactivated" "Animations and blur enabled"
 else
-    hyprctl --batch "\
+    hyprctl keyword animations:enabled false
-        keyword animations:enabled 0;\
+    hyprctl keyword decoration:blur:enabled false
-        keyword decoration:drop_shadow 0;\
-        keyword decoration:blur:enabled 0;\
-        keyword general:gaps_in 0;\
-        keyword general:gaps_out 0;\
-        keyword general:border_size 1;\
-        keyword decoration:rounding 0"
     touch ~/.cache/gamemode
     notify-send "Gamemode activated" "Animations and blur disabled"
 fi

hypr/scripts/keybindings.sh

@@ -21,29 +21,13 @@ config_file=${config_file/source=~/}
 config_file="/home/$USER$config_file"
 echo "Reading from: $config_file"
 
-keybinds=""
+# ----------------------------------------------------- 
-
+# Parse keybindings
-# Detect Start String
+# ----------------------------------------------------- 
-while read -r line
+keybinds=$(grep -oP '(?<=bind = ).*' $config_file)
-do
+keybinds=$(echo "$keybinds" | sed 's/$mainMod/SUPER/g'| sed 's/,\([^,]*\)$/ = \1/' | sed 's/, exec//g' | sed 's/^,//g')
-    if [[ "$line" == "bind"* ]]; then
+# ----------------------------------------------------- 
-
+# Show keybindings in rofi
-        line="$(echo "$line" | sed 's/$mainMod/SUPER/g')"
+# ----------------------------------------------------- 
-        line="$(echo "$line" | sed 's/bind = //g')"
-        line="$(echo "$line" | sed 's/bindm = //g')"
-
-        IFS='#' 
-        read -a strarr <<<"$line" 
-        kb_str=${strarr[0]}
-        cm_str=${strarr[1]}
-
-        IFS=',' 
-        read -a kbarr <<<"$kb_str" 
-
-        item="${kbarr[0]}  + ${kbarr[1]}"$'\r'"${cm_str:1}"
-        keybinds=$keybinds$item$'\n'
-    fi 
-done < "$config_file"
-
 sleep 0.2
-rofi -dmenu -i -markup -eh 2 -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"
+rofi -dmenu -i -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"

install.sh

@@ -62,6 +62,7 @@ if [[ $profile == *"Qtile"* ]]; then
     source .install/install-packages.sh
 fi
 source .install/wallpaper.sh
+source .install/hidpi.sh
 source .install/displaymanager.sh
 source .install/issue.sh
 source .install/restore.sh
@@ -77,6 +78,7 @@ fi
 if [[ $profile == *"Qtile"* ]]; then
     source .install/qtile-dotfiles.sh
 fi
+source .install/zshfish.sh
 source .install/settings.sh
 source .install/apps.sh
 source .install/gtk.sh

kitty/kitty.conf

@@ -0,0 +1,14 @@
+font_family     Fira Code Nerd Font
+font_size 	    14.0
+bold_font       auto
+italic_font      auto
+bold_italic_font auto
+
+background_opacity 0.7
+
+confirm_os_window_close 0
+
+enable_audio_bell no
+
+selection_foreground #000000
+selection_background #F5FBFF

nvim/init.vim

@@ -31,13 +31,3 @@ set ttyfast                 " Speed up scrolling in Vim
 " set spell                 " enable spell check (may need to download language package)
 " set noswapfile            " disable creating swap file
 " set backupdir=~/.cache/vim " Directory to store backup files.
-
-hi NonText ctermbg=none guibg=NONE
-hi Normal guibg=NONE ctermbg=NONE
-hi NormalNC guibg=NONE ctermbg=NONE
-hi SignColumn ctermbg=NONE ctermfg=NONE guibg=NONE
-
-hi Pmenu ctermbg=NONE ctermfg=NONE guibg=NONE
-hi FloatBorder ctermbg=NONE ctermfg=NONE guibg=NONE
-hi NormalFloat ctermbg=NONE ctermfg=NONE guibg=NONE
-hi TabLine ctermbg=None ctermfg=None guibg=None

rofi/config-cliphist.rasi

@@ -38,6 +38,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config-compact.rasi

@@ -39,6 +39,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {