Merge branch 'zshfish' into dev

merge hidpi support

.install/cleanup.sh

@@ -13,24 +13,6 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
-# Check for running NetworkManager.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
-    echo ":: NetworkManager.service already running."
-else
-    sudo systemctl enable NetworkManager.service
-    sudo systemctl start NetworkManager.service
-    echo ":: NetworkManager.service activated successfully."    
-fi
-
-# Check for running bluetooth.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
-    echo ":: bluetooth.service already running."
-else
-    sudo systemctl enable bluetooth.service
-    sudo systemctl start bluetooth.service
-    echo ":: bluetooth.service activated successfully."    
-fi
-
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/fish.sh

@@ -0,0 +1,6 @@
+# ------------------------------------------------------
+# install fish
+# ------------------------------------------------------
+packagesPacman=("fish");
+packagesYay=();
+source .install/install-packages.sh

.install/hidpi.sh

@@ -0,0 +1,21 @@
+
+# ------------------------------------------------------
+# hidpi support
+# ------------------------------------------------------
+
+echo -e "${GREEN}"
+figlet "hidpi"
+echo -e "${NONE}"
+
+hidpiconfirm="Do you want 2x hidpi scale?"
+if gum confirm "$hidpiconfirm"; then
+    sed -i -E 's/size = [0-9]+(\.[0-9]+)?/size = 16/' ~/dotfiles-versions/$version/alacritty/alacritty.toml
+    sed -i -E 's/[0-9]+(\.[0-9]+)?/16/' ~/dotfiles-versions/$version/.settings/rofi-font.rasi
+    echo -e '\n# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# HiDPI Scaling' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e 'source = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    sed -i -E 's/1/2/' ~/dotfiles-versions/$version/hypr/conf/monitors/default.conf
+    sed -i -E 's/24/32/' ~/dotfiles-versions/$version/hypr/conf/cursor.conf
+    echo ":: finished hidpi patch."
+fi

.install/hyprland-dotfiles.sh

@@ -5,6 +5,9 @@
 if [ -d ~/dotfiles-versions/$version/alacritty ]; then
     _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/kitty ]; then
+    _installSymLink kitty ~/.config/kitty ~/dotfiles/kitty/ ~/.config
+fi
 if [ -d ~/dotfiles-versions/$version/vim ]; then
     _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
 fi
@@ -43,5 +46,12 @@ fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
     _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
 fi
+if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
+    _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
+fi
+if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
+    if [ ! -d ~/.local/share/icons ]; then mkdir -pv ~/.local/share/icons; fi
+    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors ~/.local/share/icons/
+fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -1,65 +1,57 @@
 packagesPacman=(
     "pacman-contrib"
     "vim"
-    "bluez"
+    "bat"
-    "bluez-utils"
+    "fzf"
+    "zsh"
+    "fastfetch"
+    "ranger"
+    "btop"
     "neovim"
     "wget"
     "unzip"
-    "alacritty" 
+    "alacritty"
-    "chromium" 
+    "dunst"
-    "dunst" 
     "starship"
-    "mpv" 
+    "mpv"
     "thunar"
-    "nautilus" 
+    "nautilus"
-    "mousepad"
+    "noto-fonts"
-    "noto-fonts" 
+    "otf-font-awesome"
-    "otf-font-awesome" 
+    "ttf-fira-sans"
-    "ttf-fira-sans" 
+    "ttf-fira-code"
-    "ttf-fira-code" 
+    "ttf-firacode-nerd"
-    "ttf-firacode-nerd" 
+    "ttf-firacode-nerd"
-    "figlet" 
+    "figlet"
-    "vlc" 
+    "vlc"
-    "eza" 
+    "eza"
-    "python-pip" 
+    "python-pip"
-    "python-psutil" 
+    "python-psutil"
-    "python-rich" 
+    "python-rich"
-    "python-click" 
     "python-pywal"
-    "python-gobject"
+    "pavucontrol"
-    "pavucontrol" 
+    "tumbler"
-    "tumbler" 
     "papirus-icon-theme"
-    "breeze-icons"
-    "polkit-gnome"
-    "brightnessctl"
     "gum"
     "man-pages"
-    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
     "xdg-desktop-portal-gtk"
-    "networkmanager"
-    "network-manager-applet"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
-    "gtk4"
-    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
-    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
-    "blueman"
 );
 
 packagesYay=(
-    "bibata-cursor-theme" 
+    "vimix-cursors"
+    "orchis-theme"
     "trizen"
-    "pacseek"
+    "google-chrome"
 );

.install/packages/hyprland-packages.sh

@@ -3,15 +3,17 @@ packagesPacman=(
     "hyprpaper"
     "hyprlock"
     "hypridle"
-    "xdg-desktop-portal-hyprland" 
+    "xdg-desktop-portal-hyprland"
-    "waybar" 
+    "waybar"
-    "grim" 
+    "grim"
     "slurp"
     "swappy"
     "cliphist"
+    "kitty"
 );
 
 packagesYay=(
+    "pyprland"
     "wlogout"
     "nwg-look"
     "eww"

.install/qtile-dotfiles.sh

@@ -35,4 +35,7 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
+    _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
+fi
 echo ":: Symbolic links created."

.install/restore.sh

@@ -14,6 +14,14 @@ _showRestoreOptions() {
         restorelist+="~/dotfiles/.bashrc "
         selectedlist+="~/dotfiles/.bashrc,"
     fi
+    if [ -f ~/dotfiles/.zshrc ]; then
+        restorelist+="~/dotfiles/.zshrc "
+        selectedlist+="~/dotfiles/.zshrc,"
+    fi
+    if [ -f ~/dotfiles/.p10k.zsh ]; then
+        restorelist+="~/dotfiles/.p10k.zsh "
+        selectedlist+="~/dotfiles/.p10k.zsh,"
+    fi
     if [ -d ~/dotfiles/.settings ]; then
         restorelist+="~/dotfiles/.settings "
         selectedlist+="~/dotfiles/.settings,"
@@ -24,7 +32,7 @@ _showRestoreOptions() {
             then
                 restorelist+="~/dotfiles/hypr/hypridle.conf "
                 selectedlist+="~/dotfiles/hypr/hypridle.conf,"
-            fi        
+            fi
         fi
         if [ -f ~/dotfiles/hypr/conf/custom.conf ]; then
             restorelist+="~/dotfiles/hypr/conf/custom.conf "
@@ -75,13 +83,13 @@ _showRestoreOptions() {
     fi
     restoreselect=$(gum choose --no-limit --height 20 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " --selected="$selectedlist" $restorelist)
     if [ ! -z "$restoreselect" ] ;then
-        echo "Selected to restore:" 
+        echo "Selected to restore:"
         echo "$restoreselect"
         echo ""
         confirmrestore=$(gum choose "Start restore" "Change restore" "Skip restore")
         if [ "$confirmrestore" == "Start restore" ] ;then
             _startRestore
-        elif [ "$confirmrestore" == "Change restore" ]; then 
+        elif [ "$confirmrestore" == "Change restore" ]; then
             _showRestoreOptions
         else
             echo ":: Restore skipped."
@@ -94,7 +102,7 @@ _showRestoreOptions() {
             echo ":: Installation canceled."
             exit
         fi
-        if [ "$confirmrestore" == "Change restore" ]; then 
+        if [ "$confirmrestore" == "Change restore" ]; then
             echo ""
             _showRestoreOptions
         else
@@ -135,11 +143,11 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/keyboard.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland keyboard.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/monitor.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/monitor.conf ]; then
                 cp ~/dotfiles/hypr/conf/monitor.conf ~/dotfiles-versions/$version/hypr/conf/
-                echo ":: Hyprland monitor.conf restored!"                
+                echo ":: Hyprland monitor.conf restored!"
             fi
         fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/keybinding.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
@@ -153,19 +161,19 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/environment.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland environment.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/layout.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/layout.conf ]; then
                 cp ~/dotfiles/hypr/conf/layout.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland layout.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/windowrule.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/windowrule.conf ]; then
                 cp ~/dotfiles/hypr/conf/windowrule.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland windowrule.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/animation.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/animation.conf ]; then
                 cp ~/dotfiles/hypr/conf/animation.conf ~/dotfiles-versions/$version/hypr/conf/

.install/wallpaper.sh

@@ -5,16 +5,17 @@ echo -e "${GREEN}"
 figlet "Wallpapers"
 echo -e "${NONE}"
 if [ ! -d ~/wallpaper ]; then
-    echo "Do you want to download the wallpapers from repository https://gitlab.com/stephan-raabe/wallpaper/ ?"
+    echo "Do you want to download the wallpapers from repository https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ?"
     echo "If not, the script will install 3 default wallpapers in ~/wallpaper/"
     echo ""
     if gum confirm "Do you want to download the repository?" ;then
-        wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
+        # wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
-        unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
+        # unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
-        if [ ! -d ~/wallpaper/ ]; then
+        # if [ ! -d ~/wallpaper/ ]; then
-            mkdir ~/wallpaper
+        #     mkdir ~/wallpaper
-        fi
+        # fi
-        cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        # cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        git clone https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ~/wallpaper
         echo "Wallpapers from the repository installed successfully."
     elif [ $? -eq 130 ]; then
         exit 130

.install/zsh.sh

@@ -0,0 +1,19 @@
+# ------------------------------------------------------
+# install zsh and zinit
+# ------------------------------------------------------
+packagesPacman=("zsh");
+
+echo "Please select the zsh plugin manager:"
+zsh_manager=$(gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "oh my zsh" "zinit")
+if [[ "${zsh_manager}" == *"oh my zsh"* ]]; then
+    source .install/install-packages.sh
+    RUNZSH=no CHSH=no sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
+	git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
+	git clone https://github.com/zdharma-continuum/fast-syntax-highlighting.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/fast-syntax-highlighting
+	_installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_ohmyzsh ~/.zshrc
+else
+    packagesYay=("zinit");
+	source .install/install-packages.sh
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_zinit ~/.zshrc
+fi
+_installSymLink p10k ~/.p10k.zsh ~/dotfiles/.p10k.zsh ~/

.install/zshfish.sh

@@ -0,0 +1,25 @@
+# ------------------------------------------------------
+# Select additional shell
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "Zsh Fish"
+echo -e "${NONE}"
+echo "Please select if you want to install zsh or fish."
+echo
+zshfish=$(gum choose --no-limit --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "zsh" "fish")
+
+if [ -z "${zshfish}" ] ;then
+    echo ":: No shell selected. Keep using bash."
+else
+    echo "Please select your default shell."
+	echo
+	shell=$(echo -e "bash\n$zshfish" | gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) ")
+    if [[ $zshfish == *"zsh"* ]]; then
+		echo ":: zsh selected"
+		source .install/zsh.sh
+	fi
+	if [[ $zshfish == *"fish"* ]]; then
+		echo ":: fish selected"
+		source .install/fish.sh
+	fi
+fi

.settings/browser.sh

@@ -1 +1 @@
-chromium
+google-chrome-stable

.settings/editor.sh

@@ -1 +1 @@
-mousepad
+~/dotfiles/.settings/terminal.sh -e vim

.settings/networkmanager.sh

@@ -1 +0,0 @@
-nm-connection-editor

.settings/rofi-border-radius.rasi

@@ -0,0 +1,3 @@
+* {
+    border-radius:  15px;
+}

.settings/rofi-border.rasi

@@ -1,4 +1,3 @@
 * {
     border-width:   2px;
-    border-radius:  15px;
 }

.settings/software.sh

@@ -1 +0,0 @@
-alacritty -e pacseek

.zshrc_ohmyzsh

@@ -0,0 +1,80 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# -----------------------------------------------------
+# Oh my zsh settings
+# -----------------------------------------------------
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# ZSH_THEME="robbyrussell"
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+zstyle ':omz:update' mode auto
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+COMPLETION_WAITING_DOTS="true"
+
+# -----------------------------------------------------
+# Plugins
+# -----------------------------------------------------
+plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# -----------------------------------------------------
+# Variables
+# -----------------------------------------------------
+export PATH=$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+# export MANPATH="/usr/local/man:$MANPATH"
+
+export LANG=en_US.UTF-8
+
+export EDITOR='vim'
+
+export MAKEFLAGS='-j$(nproc)'
+export CFLAGS='-march=native -O2 -pipe'
+
+# -----------------------------------------------------
+# Alias
+# -----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias ls="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+# fix ssh if in kitty
+[ "$TERM" = "xterm-kitty" ] && alias ssh="kitty +kitten ssh"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh
+
+# -----------------------------------------------------
+# miscs
+# -----------------------------------------------------
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.zshrc_zinit

@@ -0,0 +1,62 @@
+# ---------------------------------------------------
+# Zinit and plugins
+# ---------------------------------------------------
+source /usr/share/zinit/zinit.zsh
+
+# Load powerlevel10k theme
+zinit ice depth"1" # git clone depth
+zinit light romkatv/powerlevel10k
+
+# Load plugins
+zinit light zsh-users/zsh-autosuggestions
+zinit light zdharma-continuum/fast-syntax-highlighting
+# oh-my-zsh plugins
+zi snippet OMZL::git.zsh
+zi snippet OMZP::git
+zi snippet OMZP::sudo
+zi snippet OMZP::colored-man-pages
+zi snippet OMZP::eza
+zi snippet OMZP::z
+# others
+zplugin ice as"program" pick"bin/git-dsf"
+zplugin light zdharma-continuum/zsh-diff-so-fancy
+
+# ----------------------------------------------------
+# Variables
+# ----------------------------------------------------
+export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+export EDITOR=vim
+
+# ----------------------------------------------------
+# Alias
+# ----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias eza="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# Miscs
+# -----------------------------------------------------
+# fix ssh if in kitty
+[ "$TERM" = "xterm-kitty" ] && alias ssh="kitty +kitten ssh"
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh

Vimix-hyprcursors/manifest.hl

@@ -0,0 +1,4 @@
+name = Extracted Theme
+description = Automatically extracted with hyprcursor-util
+version = 0.1
+cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -1,5 +1,5 @@
 [font]
-size = 12.0
+size = 16.0
 
 [font.normal]
 family = "FiraCode Nerd Font"
@@ -11,3 +11,6 @@ opacity = 0.7
 [window.padding]
 x = 15
 y = 15
+
+[selection]
+save_to_clipboard = true

chrome-flags.conf

@@ -0,0 +1 @@
+--ozone-platform=wayland --enable-wayland-ime

fastfetch/config.jsonc

@@ -1,110 +1,165 @@
-//  Thanks to Bina
+// Note that you must replace the image path to an existing image to display it.
+
 {
-  "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-  "logo": {
+    // "logo": {
-      "padding": {
+    //     "type": "iterm",
-      "top": 2
+    //     "source": "/Users/carter/Desktop/apple1.png",
-      }
+    //     "width": 28,
-  },
+    //     "height": 12
-  "display": {
+    // },
-        "separator": " ➜  "
+    "display": {
-  },
+    //    "separator": "  "
-  "modules": [
+        "separator": " "
-      "break",
+    },
-      "break",
+    "modules": [
-      "break",
+        {
-       {
+            "type": "host",
-          "type": "os",
+            "key": "╭─󰌢",
-          "key": "OS   ",
+            "keyColor": "green"
-          "keyColor": "31",  // = color1
+        },
-      },
+        {
-      {
+            "type": "cpu",
-          "type": "kernel",
+            "key": "├─󰻠",
-          "key": " ├  ",
+            "keyColor": "green"
-          "keyColor": "31",
+        },
-      },
+        {
-      {
+            "type": "gpu",
-          "type": "packages",
+            "key": "├─󰍛",
-          "format": "{} (pacman)",
+            "keyColor": "green"
-          "key": " ├ 󰏖 ",
+        },
-          "keyColor": "31",  
+        {
-      },
+            "type": "disk",
-      {
+            "key": "├─",
-          "type": "shell",
+            "keyColor": "green"
-          "key": " └  ",
+        },
-          "keyColor": "31", 
+        {
-      },
+            "type": "memory",
-      "break",
+            "key": "├─󰑭",
-      {
+            "keyColor": "green"
-          "type": "wm",
+        },
-          "key": "WM   ",
+        {
-          "keyColor": "32", 
+            "type": "swap",
-      },
+            "key": "├─󰓡",
-      {
+            "keyColor": "green"
-          "type": "wmtheme",
+        },
-          "key": " ├ 󰉼 ",
+        {
-          "keyColor": "32",
+            "type": "display",
-      },
+            "key": "├─󰍹",
-      {
+            "keyColor": "green"
-          "type": "icons",
+        },
-          "key": " ├ 󰀻 ",
+        {
-          "keyColor": "32",
+            "type": "battery",
-      },
+            "key": "├─",
-      {
+            "keyColor": "green"
-          "type": "cursor",
+        },
-          "key": " ├  ",
+        {
-          "keyColor": "32", 
+            "type": "poweradapter",
-      },
+            "key": "├─",
-      {
+            "keyColor": "green"
-          "type": "terminal",
+        },
-          "key": " ├  ",
+        {
-          "keyColor": "32",
+            "type": "gamepad",
-      },
+            "key": "├─",
-      {
+            "keyColor": "green"
-          "type": "terminalfont",
+        },
-          "key": " └  ",
+        {
-          "keyColor": "32", 
+            "type": "bluetooth",
-      },
+            "key": "├─",
-      "break",
+            "keyColor": "green"
-      {
+        },
-          "type": "host",
+        {
-          "format": "{5} {1} Type {2}",
+            "type": "sound",
-          "key": "PC   ",
+            "key": "╰─",
-          "keyColor": "33",
+            "keyColor": "green"
-      },
+        },
-      {
+        "break",
-          "type": "cpu",
+
-          "format": "{1} ({3}) @ {7} GHz",
+        {
-          "key": " ├  ",
+            "type": "shell",
-          "keyColor": "33",
+            "key": "╭─",
-      },
+            "keyColor": "yellow"
-      {
+        },
-          "type": "gpu",
+        {
-          "format": "{1} {2} @ {12} GHz",            
+            "type": "terminal",
-          "key": " ├ 󰢮 ",
+            "key": "├─",
-          "keyColor": "33",
+            "keyColor": "yellow"
-      },
+        },
-      {
+        {
-          "type": "memory",
+            "type": "terminalfont",
-          "key": " ├  ",
+            "key": "├─",
-          "keyColor": "33",
+            "keyColor": "yellow"
-      },
+        },
-      {
+        {
-          "type": "swap",
+            "type": "lm",
-          "key": " ├ 󰓡 ",
+            "key": "├─󰧨",
-          "keyColor": "33",
+            "keyColor": "yellow"
-      },
+        },
-      {
+        {
-          "type": "disk",
+            "type": "de",
-          "key": " ├ 󰋊 ",
+            "key": "├─",
-          "keyColor": "33",
+            "keyColor": "yellow"
-      },
+        },
-      {
+        {
-          "type": "monitor",
+            "type": "wm",
-          "key": " └  ",
+            "key": "├─",
-          "keyColor": "33",
+            "keyColor": "yellow"
-      },
+        },
-      "break",
+        {
-      "break",
+            "type": "theme",
-  ]
+            "key": "├─󰉼",
-}
+            "keyColor": "yellow"
+        },
+        {
+            "type": "icons",
+            "key": "╰─󰀻",
+            "keyColor": "yellow"
+        },
+
+        "break",
+        {
+            "type": "title",
+            "key": "╭─",
+            "format": "{1}@{2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "os",
+            "key": "├─󰣇", // Just get your distro's logo off nerdfonts.com
+            "keyColor": "blue"
+        },
+        {
+            "type": "kernel",
+            "key": "├─",
+            "format": "{1} {2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "packages",
+            "key": "├─󰏖",
+            "keyColor": "blue"
+        },
+        {
+            "type": "uptime",
+            "key": "├─󰅐",
+            "keyColor": "blue"
+        },
+        {
+            "type": "media",
+            "key": "├─󰝚",
+            "keyColor": "blue"
+        },
+        {
+            "type": "localip",
+            "key": "╰─󰩟",
+            "compact": true,
+            "keyColor": "blue"
+        },
+        "break",
+        {
+            "type": "custom",
+            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻"
+        }
+    ]
+}
+

hypr/conf/animation.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/animations/animation-moving.conf
+source = ~/dotfiles/hypr/conf/animations/animations-high.conf

hypr/conf/autostart.conf

@@ -29,8 +29,8 @@ exec-once = ~/dotfiles/hypr/scripts/ml4w-welcome-autostart.sh
 # Start ewww daemon
 exec-once = ~/dotfiles/hypr/scripts/eww.sh
 
+exec-once = pypr
+
+
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
-
-# Load configuration from ML4W Hyprland Settings App
-exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1 +1,2 @@
-exec-once = hyprctl setcursor Bibata-Modern-Ice 24
+exec-once = hyprctl setcursor Vimix-hyprcursors 24
+env = HYPRCURSOR_THEME,Vimix-hyprcursors

hypr/conf/fcitx5.conf

@@ -3,5 +3,3 @@ exec-once = fcitx5 -d --replace
 exec-once = fcitx5-remote -r
 
 bind=$mainMod CTRL, E, exec, pkill fcitx5 -9;sleep 1;fcitx5 -d --replace; sleep 1;fcitx5-remote -r
-
-env=QT_IM_MODULE,fcitx

hypr/conf/hidpi.conf

@@ -0,0 +1,6 @@
+xwayland {
+  force_zero_scaling = true
+}
+
+env = GDK_SCALE,2
+env = QT_SCALE_FACTOR,2

hypr/conf/keybindings/custom.conf

@@ -1,7 +1,7 @@
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Key bindings
 # name: "Default"
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 
 # SUPER KEY
 $mainMod = SUPER
@@ -9,7 +9,7 @@ $mainMod = SUPER
 # Applications
 bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
 bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
-bind = $mainMod, period, exec, emote
+bind = $mainMod SHIFT, E, exec, emote
 
 # Windows
 bind = $mainMod, Q, killactive
@@ -35,15 +35,18 @@ bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
 bind = $mainMod CTRL, Q, exec, wlogout
 bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
 bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
+bind = $mainMod, SPACE, exec, rofi -show drun -replace -i
 bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
 bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
 bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
-bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
 bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
 bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
+bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
 bind = $mainMod, 1, workspace, 1
@@ -92,3 +95,6 @@ bind = $mainMod, P, submap, passthru
 submap = passthru
 bind = SUPER, Escape, submap, reset
 submap = reset
+
+# Pyprland
+bind = $mainMod SHIFT, RETURN, exec, pypr toggle term

hypr/conf/keyboard.conf

@@ -3,15 +3,17 @@
 # https://wiki.hyprland.org/Configuring/Variables/#input
 # -----------------------------------------------------
 input {
-    kb_layout = de
+    kb_layout = us
-    kb_variant = 
+    kb_variant =
     kb_model =
     kb_options =
     numlock_by_default = true
     follow_mouse = 1
     mouse_refocus=false
     touchpad {
-        natural_scroll = false
+        natural_scroll = true
+        disable_while_typing=true
+        tap-to-click=true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }

hypr/conf/layouts/laptop.conf

@@ -12,5 +12,12 @@ master {
 }
 
 gestures {
-    workspace_swipe = true
+  workspace_swipe=true
+  workspace_swipe_fingers=3
+  workspace_swipe_distance=400
+  workspace_swipe_invert=true
+  workspace_swipe_min_speed_to_force=30
+  workspace_swipe_cancel_ratio=0.5
+  workspace_swipe_create_new=true
+  workspace_swipe_forever=true
 }

hypr/conf/misc.conf

@@ -5,4 +5,6 @@
 misc {
     disable_hyprland_logo = true
     disable_splash_rendering = true
+    enable_swallow = true
+    swallow_regex = ^(Alacritty)$
 }

hypr/conf/monitors/4k.conf

@@ -0,0 +1,6 @@
+# ----------------------------------------------------- 
+# Monitor Setup
+# name: "Default"
+# ----------------------------------------------------- 
+
+monitor=,preferred,auto,2

hypr/conf/monitors/dual.conf

@@ -4,4 +4,7 @@
 # ----------------------------------------------------- 
 
 monitor=DP-1,preferred,0x0,2
-monitor=HDMI-A-1,3840x2160,1920x-180,2,transform,1
+monitor=HDMI-A-1,3840x2160,1920x-275,2,transform,1
+
+workspace=1,monitor:DP-1
+exec-once=hyprctl dispatch workspace 1

hypr/conf/windowrules/custom.conf

@@ -1,6 +1,6 @@
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Window rules
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 
 windowrule = tile,^(Microsoft-edge)$
 windowrule = tile,^(Brave-browser)$
@@ -16,3 +16,6 @@ layerrule = blur, logout_dialog
 
 windowrule = float,title=^(Mathematica)$
 windowrule = opacity 0.75, ^(Code)$
+windowrule = opacity 0.75, ^(code-url-handler)$
+windowrule = float,^(QQ)$
+windowrule = float,^(fdm)$

hypr/hyprland.conf

@@ -1,48 +1,48 @@
-#  _   _                  _                 _  
+#  _   _                  _                 _
-# | | | |_   _ _ __  _ __| | __ _ _ __   __| | 
+# | | | |_   _ _ __  _ __| | __ _ _ __   __| |
-# | |_| | | | | '_ \| '__| |/ _` | '_ \ / _` | 
+# | |_| | | | | '_ \| '__| |/ _` | '_ \ / _` |
-# |  _  | |_| | |_) | |  | | (_| | | | | (_| | 
+# |  _  | |_| | |_) | |  | | (_| | | | | (_| |
-# |_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_| 
+# |_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_|
-#        |___/|_|                              
+#        |___/|_|
-#  
+#
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # IMPORTANT: Don't overwrite ML4W configuration.
 # Create your own custom configuration variation instead.
 # https://gitlab.com/stephan-raabe/dotfiles#hyprland-configuration-variations
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Monitor
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/monitor.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Autostart
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/autostart.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Cursor
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/cursor.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Environment
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/environment.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Keyboard
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/keyboard.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Load pywal color file
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/.cache/wal/colors-hyprland.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Load configuration files
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/window.conf
 source = ~/dotfiles/hypr/conf/decoration.conf
 source = ~/dotfiles/hypr/conf/layout.conf
@@ -50,22 +50,22 @@ source = ~/dotfiles/hypr/conf/misc.conf
 source = ~/dotfiles/hypr/conf/keybinding.conf
 source = ~/dotfiles/hypr/conf/windowrule.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Animation
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/animation.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Custom
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/custom.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # ML4W Configuration
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/ml4w.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Environment for xdg-desktop-portal-hyprland
-# ----------------------------------------------------- 
+# -----------------------------------------------------
-exec-once=dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
+exec-once=dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP

hypr/pyprland.toml

@@ -0,0 +1,12 @@
+[pyprland]
+
+plugins = [
+  "scratchpads",
+  "magnify",
+]
+
+[scratchpads.term]
+animation = "fromTop"
+command = "kitty --class kitty-dropterm"
+class = "kitty-dropterm"
+size = "75% 60%"

hypr/scripts/gtk.sh

@@ -29,7 +29,7 @@ gsettings set "$gnome_schema" cursor-theme "$cursor_theme"
 gsettings set "$gnome_schema" font-name "$font_name"
 gsettings set "$gnome_schema" color-scheme "prefer-dark"
 
-if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
+# if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
-    echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
+#     echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
-    hyprctl setcursor $cursor_theme $cursor_size
+#     hyprctl setcursor $cursor_theme $cursor_size
-fi
+# fi

hypr/scripts/screenshot.sh

@@ -42,4 +42,4 @@ case $choice in
         notify-send "Screenshot created and copied to clipboard" "Mode: Fullscreen"
         swappy -f "$DIR$NAME"
     ;;
-esac
+esac

install.sh

@@ -62,6 +62,7 @@ if [[ $profile == *"Qtile"* ]]; then
     source .install/install-packages.sh
 fi
 source .install/wallpaper.sh
+source .install/hidpi.sh
 source .install/displaymanager.sh
 source .install/issue.sh
 source .install/restore.sh
@@ -77,6 +78,7 @@ fi
 if [[ $profile == *"Qtile"* ]]; then
     source .install/qtile-dotfiles.sh
 fi
+source .install/zshfish.sh
 source .install/settings.sh
 source .install/apps.sh
 source .install/gtk.sh

kitty/kitty.conf

@@ -0,0 +1,14 @@
+font_family     Fira Code Nerd Font
+font_size 	    14.0
+bold_font       auto
+italic_font      auto
+bold_italic_font auto
+
+background_opacity 0.7
+
+confirm_os_window_close 0
+
+enable_audio_bell no
+
+selection_foreground #000000
+selection_background #F5FBFF

rofi/config-cliphist.rasi

@@ -38,6 +38,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config-compact.rasi

@@ -39,6 +39,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config-power.rasi

@@ -38,6 +38,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config-screenshot.rasi

@@ -38,6 +38,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config-short.rasi

@@ -38,6 +38,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config-themes.rasi

@@ -38,6 +38,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config-wallpaper.rasi

@@ -33,6 +33,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

rofi/config.rasi

@@ -39,6 +39,7 @@ configuration {
 
 /* ---- Load border width ---- */
 @import "~/dotfiles/.settings/rofi-border.rasi"
+@import "~/dotfiles/.settings/rofi-border-radius.rasi"
 
 /* ---- Window ---- */
 window {

scripts/filemanager.sh

@@ -1 +0,0 @@
-thunar

scripts/installtimeshift.sh

@@ -1,42 +0,0 @@
-#!/bin/bash
-#  _____ _                     _     _  __ _   
-# |_   _(_)_ __ ___   ___  ___| |__ (_)/ _| |_ 
-#   | | | | '_ ` _ \ / _ \/ __| '_ \| | |_| __|
-#   | | | | | | | | |  __/\__ \ | | | |  _| |_ 
-#   |_| |_|_| |_| |_|\___||___/_| |_|_|_|  \__|
-#                                              
-
-sleep 1
-clear
-figlet "Timeshift"
-
-_isInstalledYay() {
-    package="$1";
-    check="$(yay -Qs --color always "${package}" | grep "local" | grep "${package} ")";
-    if [ -n "${check}" ] ; then
-        echo 0; #'0' means 'true' in Bash
-        return; #true
-    fi;
-    echo 1; #'1' means 'false' in Bash
-    return; #false
-}
-
-timeshift_installed=$(_isInstalledYay "timeshift")
-grubbtrfs_installed=$(_isInstalledYay "grub-btrfs")
-
-if [[ $timeshift_installed == "0" ]] ;then
-    echo ":: Timeshift is already installed"
-else
-    if gum confirm "DO YOU WANT TO INSTALL Timeshift now?" ;then
-        yay -S timeshift
-    fi
-fi
-if [[ -d /boot/grub ]] && [[ $grubbtrfs_installed == "0" ]] ;then
-    echo ":: grub-btrfs is already installed"
-else
-    echo ":: grub-btrfs is required to select a snapshot on grub bootloader."
-    if gum confirm "DO YOU WANT TO INSTALL grub-btrfs now?" ;then
-        yay -S grub-btrfs
-    fi
-fi
-sleep 3

scripts/installupdates.sh

@@ -1,66 +0,0 @@
-#!/bin/bash
-#  ___           _        _ _   _   _           _       _             
-# |_ _|_ __  ___| |_ __ _| | | | | | |_ __   __| | __ _| |_ ___  ___  
-#  | || '_ \/ __| __/ _` | | | | | | | '_ \ / _` |/ _` | __/ _ \/ __| 
-#  | || | | \__ \ || (_| | | | | |_| | |_) | (_| | (_| | ||  __/\__ \ 
-# |___|_| |_|___/\__\__,_|_|_|  \___/| .__/ \__,_|\__,_|\__\___||___/ 
-#                                    |_|                              
-# by Stephan Raabe (2024) 
-# ----------------------------------------------------- 
-# Required: yay trizen timeshift btrfs-grub
-# ----------------------------------------------------- 
-
-sleep 1
-clear
-figlet "Updates"
-echo
-_isInstalledYay() {
-    package="$1";
-    check="$(yay -Qs --color always "${package}" | grep "local" | grep "${package} ")";
-    if [ -n "${check}" ] ; then
-        echo 0; #'0' means 'true' in Bash
-        return; #true
-    fi;
-    echo 1; #'1' means 'false' in Bash
-    return; #false
-}
-
-# ------------------------------------------------------
-# Confirm Start
-# ------------------------------------------------------
-
-if gum confirm "DO YOU WANT TO START THE UPDATE NOW?" ;then
-    echo 
-    echo ":: Update started."
-elif [ $? -eq 130 ]; then
-        exit 130
-else
-    echo
-    echo ":: Update canceled."
-    exit;
-fi
-
-if [[ $(_isInstalledYay "timeshift") == "0" ]] ;then
-    if gum confirm "DO YOU WANT TO CREATE A SNAPSHOT?" ;then
-        echo
-        c=$(gum input --placeholder "Enter a comment for the snapshot...")
-        sudo timeshift --create --comments "$c"
-        sudo timeshift --list
-        sudo grub-mkconfig -o /boot/grub/grub.cfg
-        echo ":: DONE. Snapshot $c created!"
-        echo
-    elif [ $? -eq 130 ]; then
-        echo ":: Snapshot canceled."
-        exit 130
-    else
-        echo ":: Snapshot canceled."
-    fi
-    echo
-fi
-
-yay
-
-notify-send "Update complete"
-echo 
-echo ":: Update complete"
-sleep 2