Merge branch 'zshfish' into dev

merge hidpi support

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "yazi/flavors/tokyo-night.yazi"]
-	path = yazi/flavors/tokyo-night.yazi
-	url = https://github.com/BennyOe/tokyo-night.yazi.git

.install/cleanup.sh

@@ -13,6 +13,24 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
+# Check for running NetworkManager.service
+if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
+    echo ":: NetworkManager.service already running."
+else
+    sudo systemctl enable NetworkManager.service
+    sudo systemctl start NetworkManager.service
+    echo ":: NetworkManager.service activated successfully."    
+fi
+
+# Check for running bluetooth.service
+if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
+    echo ":: bluetooth.service already running."
+else
+    sudo systemctl enable bluetooth.service
+    sudo systemctl start bluetooth.service
+    echo ":: bluetooth.service activated successfully."    
+fi
+
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/fcitx5.sh

@@ -0,0 +1,24 @@
+# ------------------------------------------------------
+# Select fcitx5 or not
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "fcitx5"
+echo -e "${NONE}"
+
+if gum confirm "Do you want to install fcitx5 and chinese input method?" ;then
+    packagesPacman=(
+        "fcitx5"
+        "fcitx5-chinese-addons"
+        "fcitx5-configtool"
+        "fcitx5-gtk"
+        "fcitx5-qt"
+    );
+    packagesYay=(
+        "fcitx5-skin-seasons"
+    );
+    source .install/install-packages.sh
+    echo -e "\n# -----------------------------------------------------" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "# fcitx5 support" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "# -----------------------------------------------------" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "source = ~/dotfiles/hypr/conf/fcitx5.conf" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+fi

.install/hidpi.sh

@@ -0,0 +1,17 @@
+
+# ------------------------------------------------------
+# hidpi support
+# ------------------------------------------------------
+
+echo -e "${GREEN}"
+figlet "hidpi"
+echo -e "${NONE}"
+
+hidpiconfirm="Do you want 2x hidpi scale?"
+if gum confirm "$hidpiconfirm"; then
+    sed -i -E 's/size = [0-9]+(\.[0-9]+)?/size = 16/' ~/dotfiles-versions/$version/alacritty/alacritty.toml
+    sed -i -E 's/[0-9]+(\.[0-9]+)?/16/' ~/dotfiles-versions/$version/.settings/rofi-font.rasi
+    echo -e '\n\n# hidpi scale\nsource = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/conf/custom.conf
+    sed -i -E 's/1/2/' ~/dotfiles-versions/$version/hypr/conf/monitors/default.conf
+    echo ":: finished hidpi patch."
+fi

.install/hyprland-dotfiles.sh

@@ -40,7 +40,7 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/eww ]; then
+if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink eww ~/.config/eww ~/dotfiles/eww/ ~/.config
 fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
@@ -49,12 +49,5 @@ fi
 if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
     _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
-    if [ ! -d ~/.local/share/icons ]; then mkdir -pv ~/.local/share/icons; fi
-    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors ~/.local/share/icons/
-fi
-if [ -d ~/dotfiles-versions/$version/ranger ]; then
-    _installSymLink ranger ~/.config/ranger ~/dotfiles/ranger/ ~/.config
-fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -7,15 +7,19 @@ packagesPacman=(
     "fastfetch"
     "ranger"
     "btop"
+    "bluez"
+    "bluez-utils"
     "neovim"
     "wget"
     "unzip"
     "alacritty" 
+    "chromium" 
     "dunst" 
     "starship"
     "mpv" 
     "thunar"
     "nautilus" 
+    "mousepad"
     "noto-fonts" 
     "otf-font-awesome" 
     "ttf-fira-sans" 
@@ -28,32 +32,41 @@ packagesPacman=(
     "python-pip" 
     "python-psutil" 
     "python-rich" 
+    "python-click" 
     "python-pywal"
+    "python-gobject"
     "pavucontrol" 
     "tumbler" 
     "papirus-icon-theme"
+    "breeze-icons"
+    "polkit-gnome"
+    "brightnessctl"
     "gum"
     "man-pages"
+    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
-#    "xdg-desktop-portal-gtk"
+    "xdg-desktop-portal-gtk"
+    "networkmanager"
+    "network-manager-applet"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
+    "gtk4"
+    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
+    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
-    "pipewire-pulse"
-    "wireplumber"
+    "blueman"
 );
 
 packagesYay=(
     "vimix-cursors"
-    "orchis-theme"
     "trizen"
-    "google-chrome"
+    "pacseek"
 );

.install/packages/hyprland-packages.sh

@@ -3,14 +3,14 @@ packagesPacman=(
     "hyprpaper"
     "hyprlock"
     "hypridle"
-    #    "xdg-desktop-portal-hyprland"
+    "xdg-desktop-portal-hyprland" 
     "waybar" 
     "grim" 
     "slurp"
     "swappy"
     "cliphist"
     "kitty"
-)
+);
 
 packagesYay=(
     "pyprland"
@@ -18,4 +18,4 @@ packagesYay=(
     "nwg-look"
     "eww"
     "hyprshade"
-)
+);

.install/templates/keyboard-default.conf

@@ -8,7 +8,7 @@ input {
     kb_model =
     kb_options =
     numlock_by_default = true
-    mouse_refocus = false
+    mouse_refocus=false
     
     # For United States
     # kb_layout = us
@@ -28,7 +28,3 @@ input {
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
-
-gestures {
-    workspace_swipe = true
-}

.install/templates/keyboard-laptop.conf

@@ -8,7 +8,7 @@ input {
     kb_model =
     kb_options =
     numlock_by_default = true
-    mouse_refocus = false
+    mouse_refocus=false
     
     # For United States
     # kb_layout = us
@@ -22,14 +22,9 @@ input {
         # natural_scroll = false
 
         # for laptop
-        natural_scroll = true
+        natural_scroll = yes
         middle_button_emulation = true
-        clickfinger_behavior = true
-        disable_while_typing = true
+        clickfinger_behavior = 1  
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }
-
-gestures {
-    workspace_swipe = true
-}

.settings/browser.sh

@@ -1 +1 @@
-google-chrome-stable
+chromium

.settings/editor.sh

@@ -1 +1 @@
-~/dotfiles/.settings/terminal.sh -e vim
+mousepad

.settings/networkmanager.sh

@@ -0,0 +1 @@
+nm-connection-editor

.settings/software.sh

@@ -0,0 +1 @@
+alacritty -e pacseek

.settings/terminal.sh

@@ -1 +1 @@
-kitty
+alacritty

.version/name

@@ -1 +1 @@
-2.9.1.2
+2.9.1.1

.version/version

@@ -1 +1 @@
-2912
+2911

.zshrc

@@ -0,0 +1,128 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# If you come from bash you might have to change your $PATH.
+export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# Set name of the theme to load --- if set to "random", it will
+# load a random theme each time oh-my-zsh is loaded, in which case,
+# to know which specific one was loaded, run: echo $RANDOM_THEME
+# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
+# ZSH_THEME="robbyrussell"
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Set list of themes to pick from when loading at random
+# Setting this variable when ZSH_THEME=random will cause zsh to load
+# a theme from this variable instead of looking in $ZSH/themes/
+# If set to an empty array, this variable will have no effect.
+# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )
+
+# Uncomment the following line to use case-sensitive completion.
+# CASE_SENSITIVE="true"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+# Uncomment one of the following lines to change the auto-update behavior
+# zstyle ':omz:update' mode disabled  # disable automatic updates
+# zstyle ':omz:update' mode auto      # update automatically without asking
+# zstyle ':omz:update' mode reminder  # just remind me to update when it's time
+
+# Uncomment the following line to change how often to auto-update (in days).
+# zstyle ':omz:update' frequency 13
+
+# Uncomment the following line if pasting URLs and other text is messed up.
+# DISABLE_MAGIC_FUNCTIONS="true"
+
+# Uncomment the following line to disable colors in ls.
+# DISABLE_LS_COLORS="true"
+
+# Uncomment the following line to disable auto-setting terminal title.
+# DISABLE_AUTO_TITLE="true"
+
+# Uncomment the following line to enable command auto-correction.
+# ENABLE_CORRECTION="true"
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+# COMPLETION_WAITING_DOTS="true"
+
+# Uncomment the following line if you want to disable marking untracked files
+# under VCS as dirty. This makes repository status check for large repositories
+# much, much faster.
+# DISABLE_UNTRACKED_FILES_DIRTY="true"
+
+# Uncomment the following line if you want to change the command execution time
+# stamp shown in the history command output.
+# You can set one of the optional three formats:
+# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
+# or set a custom format using the strftime function format specifications,
+# see 'man strftime' for details.
+# HIST_STAMPS="mm/dd/yyyy"
+
+# Would you like to use another custom folder than $ZSH/custom?
+# ZSH_CUSTOM=/path/to/new-custom-folder
+
+# Which plugins would you like to load?
+# Standard plugins can be found in $ZSH/plugins/
+# Custom plugins may be added to $ZSH_CUSTOM/plugins/
+# Example format: plugins=(rails git textmate ruby lighthouse)
+# Add wisely, as too many plugins slow down shell startup.
+plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# User configuration
+
+# export MANPATH="/usr/local/man:$MANPATH"
+
+# You may need to manually set your language environment
+# export LANG=en_US.UTF-8
+
+# Preferred editor for local and remote sessions
+# if [[ -n $SSH_CONNECTION ]]; then
+#   export EDITOR='vim'
+# else
+#   export EDITOR='mvim'
+# fi
+
+# Compilation flags
+# export ARCHFLAGS="-arch x86_64"
+
+# Set personal aliases, overriding those provided by oh-my-zsh libs,
+# plugins, and themes. Aliases can be placed here, though oh-my-zsh
+# users are encouraged to define aliases within the ZSH_CUSTOM folder.
+# For a full list of active aliases, run `alias`.
+#
+# Example aliases
+# alias zshconfig="mate ~/.zshrc"
+# alias ohmyzsh="mate ~/.oh-my-zsh"
+
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias ls="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+export EDITOR=nvim

CHANGELOG.md

@@ -1,11 +1,3 @@
-Version 2.9.1.2
-https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
---------------------------------------------------------
-- Workspaces module in waybar updated to enable scroll to change the workspace https://gitlab.com/stephan-raabe/dotfiles/-/merge_requests/114
-- More functions deactivated in Game Mode (SUPER+ALT+G)
-- Keybindings rofi menu updated with keybinding description. Open with right mouse click on Apps waybar module
-- Fixed bug of ML4W Hyprland Settings App with Hyprland 0.41.0
-
 Version 2.9.1.1
 https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
 --------------------------------------------------------

README.md

@@ -1,4 +1,4 @@
-# ML4W Dotfiles 2.9.1.2
+# ML4W Dotfiles 2.9.1.1
 
 An advanced configuration of Hyprland for Arch Linux based distributions. This package includes an installation script to install and setup the required components.
 
@@ -55,8 +55,6 @@ THANK YOU very much for all your support, contributions and ideas:
 - Don Williams: https://github.com/dwilliam62
 - Teodor Orzechowski: https://gitlab.com/sq6gtt
 - Jamie Deppeler: https://gitlab.com/bknight2k
-- Yingjie Wang: https://gitlab.com/GaugeAndGravity
-- Daniel Gerber: https://gitlab.com/dan.john.gerber
 - https://gitlab.com/muee
 
 and many more...

Vimix-hyprcursors/manifest.hl

@@ -1,4 +0,0 @@
-name = Extracted Theme
-description = Automatically extracted with hyprcursor-util
-version = 0.1
-cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -1,5 +1,5 @@
 [font]
-size = 12.0
+size = 16.0
 
 [font.normal]
 family = "FiraCode Nerd Font"
@@ -9,8 +9,8 @@ style = "Regular"
 opacity = 0.7
 
 [window.padding]
-x = 0
-y = 0
+x = 15
+y = 15
 
 [selection]
 save_to_clipboard = true

fastfetch/config.jsonc

@@ -1,4 +1,5 @@
 // Note that you must replace the image path to an existing image to display it.
+
 {
     "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
     // "logo": {
@@ -73,6 +74,7 @@
             "keyColor": "green"
         },
         "break",
+
         {
             "type": "shell",
             "key": "╭─",
@@ -83,11 +85,6 @@
             "key": "├─",
             "keyColor": "yellow"
         },
-        {
-            "type": "editor",
-            "key": "├─",
-            "keyColor": "yellow"
-        },
         {
             "type": "terminalfont",
             "key": "├─",
@@ -118,6 +115,7 @@
             "key": "╰─󰀻",
             "keyColor": "yellow"
         },
+
         "break",
         {
             "type": "title",
@@ -151,21 +149,6 @@
             "key": "├─󰝚",
             "keyColor": "blue"
         },
-        {
-            "type": "cpuusage",
-            "key": "├─",
-            "keyColor": "blue"
-        },
-        {
-            "type": "loadavg",
-            "key": "├─",
-            "keyColor": "blue"
-        },
-        {
-            "type": "processes",
-            "key": "├─",
-            "keyColor": "blue"
-        },
         {
             "type": "localip",
             "key": "╰─󰩟",
@@ -175,7 +158,8 @@
         "break",
         {
             "type": "custom",
-            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻 "
+            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻"
         }
     ]
 }
+

hypr/conf/autostart.conf

@@ -34,3 +34,6 @@ exec-once = pypr
 
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
+
+# Load configuration from ML4W Hyprland Settings App
+exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1,2 +1 @@
-exec-once = hyprctl setcursor Vimix-hyprcursors 24
-env = HYPRCURSOR_THEME,Vimix-hyprcursors
+exec-once = hyprctl setcursor Vimix 24

hypr/conf/decorations/custom.conf

@@ -18,14 +18,8 @@ decoration {
     inactive_opacity = 0.8
     fullscreen_opacity = 1.0
 
-    shadow {
-        enabled = true
-        range = 30
-        render_power = 3
-        color = 0x66000000
-    }
-    #drop_shadow = true
-    #shadow_range = 30
-    #shadow_render_power = 3
-    #col.shadow = 0x66000000
+    drop_shadow = true
+    shadow_range = 30
+    shadow_render_power = 3
+    col.shadow = 0x66000000
 }

hypr/conf/environments/default.conf

@@ -6,7 +6,6 @@
 env = XDG_SESSION_TYPE,wayland
 env = XDG_SESSION_DESKTOP,Hyprland
 env = QT_QPA_PLATFORM,wayland
-env = QT_QPA_PLATFORMTHEME,qt6ct
 env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
 env = QT_AUTO_SCREEN_SCALE_FACTOR,1
 env = MOZ_ENABLE_WAYLAND,1

hypr/conf/fcitx5.conf

@@ -0,0 +1,5 @@
+exec-once = fcitx5-remote -r
+exec-once = fcitx5 -d --replace
+exec-once = fcitx5-remote -r
+
+bind=$mainMod CTRL, E, exec, pkill fcitx5 -9;sleep 1;fcitx5 -d --replace; sleep 1;fcitx5-remote -r

hypr/conf/hidpi.conf

@@ -0,0 +1,6 @@
+xwayland {
+  force_zero_scaling = true
+}
+
+env = GDK_SCALE,2
+env = QT_SCALE_FACTOR=2

hypr/conf/keybindings/custom.conf

@@ -9,14 +9,11 @@ $mainMod = SUPER
 # Applications
 bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
 bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
-bind = $mainMod SHIFT, E, exec, emote
+bind = $mainMod, period, exec, emote
 
 # Windows
 bind = $mainMod, Q, killactive
 bind = $mainMod, F, fullscreen
-bind = $mainMod SHIFT, F, fullscreen, 1
-bind = $mainMod CTRL SHIFT, F, fullscreen, 2
-bind = $mainMod ALT, F, fakefullscreen
 bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
 bind = $mainMod, T, togglefloating
 bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
@@ -32,25 +29,21 @@ bind = $mainMod SHIFT, left, resizeactive, -100 0
 bind = $mainMod SHIFT, up, resizeactive, 0 -100
 bind = $mainMod SHIFT, down, resizeactive, 0 100
 bind = $mainMod, G, togglegroup
-bind = $mainMod CTRL, Tab, changegroupactive, f
 
 # Actions
 bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
 bind = $mainMod CTRL, Q, exec, wlogout
 bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
 bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
-bind = $mainMod, SPACE, exec, rofi -show drun -replace -i
+bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
 bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
 bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
-bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
 bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
+bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
 bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
 bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
 bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
-bind = $mainMod CTRL, P, exec, hyprpicker -a
-bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
-bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
 bind = $mainMod, 1, workspace, 1

hypr/conf/keybindings/default.conf

@@ -7,88 +7,90 @@
 $mainMod = SUPER
 
 # Applications
-bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh # Open the terminal
-bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh # Open the browser
-bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh # Open the filemanager
+bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
+bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
 
 # Windows
-bind = $mainMod, Q, killactive # Kill active window
-bind = $mainMod, F, fullscreen # Set active window to fullscreen
-bind = $mainMod, T, togglefloating # Toggle active windows into floating mode
-bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh # Toggle all windows into floating mode
-bind = $mainMod, J, togglesplit # Toggle split
-bind = $mainMod, left, movefocus, l # Move focus left
-bind = $mainMod, right, movefocus, r # Move focus right
-bind = $mainMod, up, movefocus, u # Move focus up
-bind = $mainMod, down, movefocus, d # Move focus down
-bindm = $mainMod, mouse:272, movewindow # Move window with the mouse
-bindm = $mainMod, mouse:273, resizewindow # Resize window with the mouse
-bind = $mainMod SHIFT, right, resizeactive, 100 0 # Increase window width with keyboard
-bind = $mainMod SHIFT, left, resizeactive, -100 0 # Reduce window width with keyboard
-bind = $mainMod SHIFT, down, resizeactive, 0 100 # Increase window height with keyboard
-bind = $mainMod SHIFT, up, resizeactive, 0 -100 # Reduce window height with keyboard
-bind = $mainMod, G, togglegroup # Toggle window group
+bind = $mainMod, Q, killactive
+bind = $mainMod, F, fullscreen
+bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
+bind = $mainMod, T, togglefloating
+bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
+bind = $mainMod, J, togglesplit
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow
+bind = $mainMod SHIFT, right, resizeactive, 100 0
+bind = $mainMod SHIFT, left, resizeactive, -100 0
+bind = $mainMod SHIFT, up, resizeactive, 0 -100
+bind = $mainMod SHIFT, down, resizeactive, 0 100
+bind = $mainMod, G, togglegroup
 
 # Actions
-bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh # Toggle animations
-bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh # Take a screenshot
-bind = $mainMod CTRL, Q, exec, wlogout # Start wlogout
-bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh # Change the wallpaper
-bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select # Open wallpaper selector
-bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i # Open application launcher
-bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh # Show keybindings
-bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh # Reload waybar
-bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh # Toggle waybar
-bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh # Reload hyprland config
-bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh # Open clipboard manager
-bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh # Open waybar theme switcher
-bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
-bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh # Toggle screenshader
-bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh # Toggle game mode
+bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh
+bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
+bind = $mainMod CTRL, Q, exec, wlogout
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
+bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i
+bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
+bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
+bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
+bind = $mainMod CTRL, F, exec, ~/dotfiles/scripts/filemanager.sh
+bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
+bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
+bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
 
 # Workspaces
-bind = $mainMod, 1, workspace, 1 # Open workspace 1
-bind = $mainMod, 2, workspace, 2 # Open workspace 2
-bind = $mainMod, 3, workspace, 3 # Open workspace 3
-bind = $mainMod, 4, workspace, 4 # Open workspace 4
-bind = $mainMod, 5, workspace, 5 # Open workspace 5
-bind = $mainMod, 6, workspace, 6 # Open workspace 6
-bind = $mainMod, 7, workspace, 7 # Open workspace 7
-bind = $mainMod, 8, workspace, 8 # Open workspace 8
-bind = $mainMod, 9, workspace, 9 # Open workspace 9
-bind = $mainMod, 0, workspace, 10 # Open workspace 10
-bind = $mainMod SHIFT, 1, movetoworkspace, 1 # Move active window to workspace 1
-bind = $mainMod SHIFT, 2, movetoworkspace, 2 # Move active window to workspace 2
-bind = $mainMod SHIFT, 3, movetoworkspace, 3 # Move active window to workspace 3
-bind = $mainMod SHIFT, 4, movetoworkspace, 4 # Move active window to workspace 4
-bind = $mainMod SHIFT, 5, movetoworkspace, 5 # Move active window to workspace 5
-bind = $mainMod SHIFT, 6, movetoworkspace, 6 # Move active window to workspace 6
-bind = $mainMod SHIFT, 7, movetoworkspace, 7 # Move active window to workspace 7
-bind = $mainMod SHIFT, 8, movetoworkspace, 8 # Move active window to workspace 8
-bind = $mainMod SHIFT, 9, movetoworkspace, 9 # Move active window to workspace 9
-bind = $mainMod SHIFT, 0, movetoworkspace, 10 # Move active window to workspace 10
-bind = $mainMod, mouse_down, workspace, e+1 # Open next workspace
-bind = $mainMod, mouse_up, workspace, e-1 # Open previous workspace
-bind = $mainMod CTRL, down, workspace, empty # Open the next empty workspace
-
-# Passthrough SUPER KEY to Virtual Machine
-bind = $mainMod, P, submap, passthru # Passthrough SUPER key to virtual machine
-submap = passthru
-bind = SUPER, Escape, submap, reset # Get SUPER key back from virtual machine
-submap = reset
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+bind = $mainMod CTRL, down, workspace, empty
 
 # Fn keys
-bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10% # Increase brightness by 10%
-bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%- # Reduce brightness by 10%
-bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5% # Increase volume by 5%
-bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5% # Reduce volume by 5%
-bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle # Toggle mute
-bind = , XF86AudioPlay, exec, playerctl play-pause # Audio play pause
-bind = , XF86AudioPause, exec, playerctl pause # Audio pause
-bind = , XF86AudioNext, exec, playerctl next # Audio next
-bind = , XF86AudioPrev, exec, playerctl previous # Audio previous
-bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle # Toggle microphone
-bind = , XF86Calculator, exec, qalculate-gtk # Open calculator
-bind = , XF86Lock, exec, hyprlock # Open screenlock
-bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage # Open ML4W Dotfiles Settings app
+bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10%
+bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%-
+bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5%
+bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5%
+bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bind = , XF86AudioPlay, exec, playerctl play-pause
+bind = , XF86AudioPause, exec, playerctl pause
+bind = , XF86AudioNext, exec, playerctl next
+bind = , XF86AudioPrev, exec, playerctl previous
+bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle
+bind = , XF86Calculator, exec, qalculate-gtk
+bind = , XF86Lock, exec, hyprlock
+bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/hypr/settings/settings.sh
 
+# Passthrough SUPER KEY to Virtual Machine
+bind = $mainMod, P, submap, passthru
+submap = passthru
+bind = SUPER, Escape, submap, reset
+submap = reset

hypr/conf/layouts/default.conf

@@ -8,6 +8,7 @@ dwindle {
 }
 
 master {
+    new_is_master = true
 }
 
 gestures {

hypr/conf/misc.conf

@@ -6,6 +6,5 @@ misc {
     disable_hyprland_logo = true
     disable_splash_rendering = true
     enable_swallow = true
-    swallow_regex = ^(Alacritty|kitty|thunar)$
-    font_family = FiraCode Nerd Font
+    swallow_regex = ^(Alacritty)$
 }

hypr/conf/ml4w.conf

@@ -22,9 +22,9 @@ windowrulev2 = float,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = size 400 500,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = move 10% 20%,class:(ml4w-dotfiles-settings.py)
 
-windowrulev2 = float,class:(com.ml4w.hyprland.settings)
-windowrulev2 = size 700 600,class:(com.ml4w.hyprland.settings)
-windowrulev2 = center,class:(com.ml4w.hyprland.settings)
+windowrulev2 = float,class:(com.ml4w.hyprlandsettings)
+windowrulev2 = size 700 600,class:(com.ml4w.hyprlandsettings)
+windowrulev2 = center,class:(com.ml4w.hyprlandsettings)
 
 windowrulev2 = float,class:(ml4w-hyprland-settings.py)
 windowrulev2 = size 700 600,class:(ml4w-hyprland-settings.py)
@@ -37,3 +37,4 @@ windowrulev2 = center,class:(dotfiles-floating)
 env = APPIMAGELAUNCHER_DISABLE,1
 env = XCURSOR_SIZE,24
 env = XDG_CURRENT_DESKTOP,Hyprland
+

hypr/conf/monitors/4k.conf

@@ -0,0 +1,6 @@
+# ----------------------------------------------------- 
+# Monitor Setup
+# name: "Default"
+# ----------------------------------------------------- 
+
+monitor=,preferred,auto,2

hypr/conf/windowrules/custom.conf

@@ -14,11 +14,6 @@ windowrule = pin,^(showmethekey-gtk)$
 layerrule = blur, gtk-layer-shell
 layerrule = blur, logout_dialog
 
-windowrule = float,title:^(Mathematica)$
+windowrule = float,title=^(Mathematica)$
 windowrule = opacity 0.75, ^(Code)$
-windowrule = opacity 0.75, ^(code-oss)$
-windowrule = opacity 0.75, ^(code-url-handler)$
 windowrule = float,^(QQ)$
-windowrule = float,^(wechat)$
-windowrule = float,^(fdm)$
-windowrule = float,^(xdg-desktop-portal-gtk)$

hypr/conf/windows/default.conf

@@ -11,12 +11,3 @@ general {
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
 }
-
-group {
-    col.border_active = $color11
-    col.border_inactive = rgba(ffffffff)
-    groupbar {
-        col.active = $color11
-        col.inactive = $color13
-    }
-}

hypr/pyprland.toml

@@ -7,6 +7,6 @@ plugins = [
 
 [scratchpads.term]
 animation = "fromTop"
-command = "alacritty --class alacritty-dropterm"
-class = "alacritty-dropterm"
+command = "kitty --class kitty-dropterm"
+class = "kitty-dropterm"
 size = "75% 60%"

hypr/scripts/gamemode.sh

@@ -7,18 +7,13 @@
 #
 
 if [ -f ~/.cache/gamemode ] ;then
-    hyprctl reload
+    hyprctl keyword animations:enabled true
+    hyprctl keyword decoration:blur:enabled true
     rm ~/.cache/gamemode
     notify-send "Gamemode deactivated" "Animations and blur enabled"
 else
-    hyprctl --batch "\
-        keyword animations:enabled 0;\
-        keyword decoration:drop_shadow 0;\
-        keyword decoration:blur:enabled 0;\
-        keyword general:gaps_in 0;\
-        keyword general:gaps_out 0;\
-        keyword general:border_size 1;\
-        keyword decoration:rounding 0"
+    hyprctl keyword animations:enabled false
+    hyprctl keyword decoration:blur:enabled false
     touch ~/.cache/gamemode
     notify-send "Gamemode activated" "Animations and blur disabled"
 fi

hypr/scripts/gtk.sh

@@ -29,7 +29,7 @@ gsettings set "$gnome_schema" cursor-theme "$cursor_theme"
 gsettings set "$gnome_schema" font-name "$font_name"
 gsettings set "$gnome_schema" color-scheme "prefer-dark"
 
-# if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
-#     echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
-#     hyprctl setcursor $cursor_theme $cursor_size
-# fi
+if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
+    echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
+    hyprctl setcursor $cursor_theme $cursor_size
+fi

hypr/scripts/keybindings.sh

@@ -21,29 +21,13 @@ config_file=${config_file/source=~/}
 config_file="/home/$USER$config_file"
 echo "Reading from: $config_file"
 
-keybinds=""
-
-# Detect Start String
-while read -r line
-do
-    if [[ "$line" == "bind"* ]]; then
-
-        line="$(echo "$line" | sed 's/$mainMod/SUPER/g')"
-        line="$(echo "$line" | sed 's/bind = //g')"
-        line="$(echo "$line" | sed 's/bindm = //g')"
-
-        IFS='#' 
-        read -a strarr <<<"$line" 
-        kb_str=${strarr[0]}
-        cm_str=${strarr[1]}
-
-        IFS=',' 
-        read -a kbarr <<<"$kb_str" 
-
-        item="${kbarr[0]}  + ${kbarr[1]}"$'\r'"${cm_str:1}"
-        keybinds=$keybinds$item$'\n'
-    fi 
-done < "$config_file"
-
+# ----------------------------------------------------- 
+# Parse keybindings
+# ----------------------------------------------------- 
+keybinds=$(grep -oP '(?<=bind = ).*' $config_file)
+keybinds=$(echo "$keybinds" | sed 's/$mainMod/SUPER/g'| sed 's/,\([^,]*\)$/ = \1/' | sed 's/, exec//g' | sed 's/^,//g')
+# ----------------------------------------------------- 
+# Show keybindings in rofi
+# ----------------------------------------------------- 
 sleep 0.2
-rofi -dmenu -i -markup -eh 2 -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"
+rofi -dmenu -i -replace -p "Keybinds" -config ~/dotfiles/rofi/config-compact.rasi <<< "$keybinds"

install.sh

@@ -45,6 +45,7 @@ source .install/remove.sh
 source .install/general.sh
 source .install/packages/general-packages.sh
 source .install/install-packages.sh
+source .install/fcitx5.sh
 source .install/profile.sh
 if [[ $profile == *"Hyprland"* ]]; then
     echo -e "${GREEN}"
@@ -61,6 +62,7 @@ if [[ $profile == *"Qtile"* ]]; then
     source .install/install-packages.sh
 fi
 source .install/wallpaper.sh
+source .install/hidpi.sh
 source .install/displaymanager.sh
 source .install/issue.sh
 source .install/restore.sh

kitty/kitty.conf

@@ -1,5 +1,5 @@
 font_family     Fira Code Nerd Font
-font_size        16.0
+font_size 	    14.0
 bold_font       auto
 italic_font      auto
 bold_italic_font auto
@@ -8,18 +8,7 @@ background_opacity 0.7
 
 confirm_os_window_close 0
 
-selection_foreground #000000
-selection_background #F5FBFF
-
-detect_urls    yes
-copy_on_select clipboard
-strip_trailing_spaces smart
-rectangle_select_modifiers ctrl+alt
-terminal_select_modifiers shift
-
 enable_audio_bell no
 
-remember_window_size no
-window_padding_width 5
-
-map ctrl+super+enter    launch --cwd=current
+selection_foreground #000000
+selection_background #F5FBFF

nvim/.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,121 +0,0 @@
-name: Bug Report
-description: File a bug report
-labels: [bug]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        _Before reporting:_ Search [existing issues](https://github.com/ayamir/nvimdots/issues) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
-        > [!IMPORTANT]
-        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
-  - type: checkboxes
-    id: is-latest-commit
-    attributes:
-      label: "Version confirmation"
-      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
-      options:
-        - label: "Confirm"
-          required: true
-  - type: checkboxes
-    id: prerequisites-done
-    attributes:
-      label: "Following prerequisites"
-      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
-      options:
-        - label: "Confirm"
-          required: true
-  - type: checkboxes
-    id: not-user-config-issue
-    attributes:
-      label: "Not a user config issue"
-      description: "This issue _persists_ after removing ALL user configs. If this is not the case, you should open a [Custom (User) Config Issue](https://github.com/ayamir/nvimdots/issues/new?assignees=&labels=usage&projects=&template=custom_config.yml) instead."
-      options:
-        - label: "Confirm"
-          required: true
-
-  - type: input
-    id: nvim-version
-    attributes:
-      label: "Neovim version"
-      description: "Paste the output of `nvim --version` here"
-      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
-    validations:
-      required: true
-  - type: input
-    id: system-version
-    attributes:
-      label: "Operating system/version"
-      placeholder: "macOS 12.6.1"
-    validations:
-      required: true
-  - type: input
-    id: terminal-version
-    attributes:
-      label: "Terminal name/version"
-      placeholder: "iTerm2 Build 3.4.17"
-    validations:
-      required: true
-  - type: input
-    id: term-env
-    attributes:
-      label: "$TERM environment variable"
-      placeholder: "xterm-256color"
-    validations:
-      required: false
-  - type: dropdown
-    id: branch
-    attributes:
-      label: "Branch info"
-      description: "Which branch are you currently on? If you are not sure, check the output of `git rev-parse --abbrev-ref HEAD`"
-      options:
-        - main (Default/Latest)
-        - 0.9 (Legacy)
-        - 0.8 (Deprecated)
-        - 0.11 (Nightly)
-    validations:
-      required: true
-  - type: dropdown
-    id: fetch-pref
-    attributes:
-      label: "Fetch Preferences"
-      description: "In what way do you fetch resources? If you are not sure, check the value of `use_ssh` in `lua/user/settings.lua`"
-      options:
-        - SSH (use_ssh = true)
-        - HTTPS (use_ssh = false)
-    validations:
-      required: true
-
-  - type: textarea
-    id: repro-steps
-    attributes:
-      label: "How to reproduce the issue"
-      description: "Note: Issues without any information will be closed directly"
-      placeholder: |
-        Steps to reproduce the behavior:
-        1. Go to '...'
-        2. Click on '....'
-        3. Scroll down to '....'
-        4. See error
-    validations:
-      required: true
-
-  - type: textarea
-    id: expected-behavior
-    attributes:
-      label: "Expected behavior"
-      description: "Describe the behavior you expect"
-    validations:
-      required: true
-  - type: textarea
-    id: actual-behavior
-    attributes:
-      label: "Actual behavior"
-    validations:
-      required: false
-  - type: textarea
-    id: extras
-    attributes:
-      label: Additional information
-      description: If applicable, you may include logs, images, or videos to help explain your problem
-    validations:
-      required: false

nvim/.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +0,0 @@
-blank_issues_enabled: true
-contact_links:
-  - name: GitHub Discussions
-    url: https://github.com/ayamir/nvimdots/discussions/new/choose
-    about: Any issue that does not fall into the above categories shall go here
-  - name: GitHub Wiki
-    url: https://github.com/ayamir/nvimdots/wiki
-    about: Make sure you have checked our documentation first. To be explicit, the "Issues" section

nvim/.github/ISSUE_TEMPLATE/custom_config.yml

@@ -1,111 +0,0 @@
-name: Custom (User) Config Issue
-description: Problems when trying to implement your custom config
-labels: [usage]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        _Before requesting:_ Make sure you've read through our [Wiki: Usage](https://github.com/ayamir/nvimdots/wiki/Usage) before you start to add things to nvimdots!
-        > [!IMPORTANT]
-        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
-  - type: checkboxes
-    id: is-latest-commit
-    attributes:
-      label: "Version confirmation"
-      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
-      options:
-        - label: "Confirm"
-          required: true
-  - type: checkboxes
-    id: prerequisites-done
-    attributes:
-      label: "Following prerequisites"
-      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
-      options:
-        - label: "Confirm"
-          required: true
-
-  - type: input
-    id: nvim-version
-    attributes:
-      label: "Neovim version"
-      description: "Paste the output of `nvim --version` here"
-      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
-    validations:
-      required: true
-  - type: dropdown
-    id: branch-info
-    attributes:
-      label: "Branch info"
-      description: "This issue template mainly targets `main` branch. Check the output of `git rev-parse --abbrev-ref HEAD` if you're not sure."
-      options:
-        - main (Default/Latest)
-        - 0.9 (Legacy)
-        - 0.8 (Deprecated)
-        - 0.11 (Nightly)
-    validations:
-      required: true
-
-  - type: textarea
-    id: folder-structure-ta
-    attributes:
-      label: "Minimal (user) folder structure required to reproduce the issue"
-      description: "Note: You only need to describe where the *new/modified files* are. This section will be automatically formatted."
-      render: console
-      placeholder: |
-        └── lua/
-          ├── core/
-          ├── keymap/                    default keymaps
-          ├── modules/                   default plugins and plugin configs
-          └── user                       custom configs root directory
-              ├── configs/               custom plugin config folder
-              │   ├── dap-clients/       custom dap client config folder
-              │   ├── lsp-servers/       custom lsp server config folder
-              │   └── your-config.lua    your plugin configs (if applicable)
-              ├── keymap/                custom keymap folder
-              │   └── your-config.lua    your keymap overrides (if applicable)
-              ├── plugins/               custom plugin folder
-              │   └── your-config.lua    your plugins (if applicable)
-              ├── event.lua              custom `core/events.lua` overrides
-              ├── options.lua            custom `core/options.lua` overrides
-              └── settings.lua           custom `core/settings.lua` overrides
-    validations:
-      required: true
-
-  - type: textarea
-    id: repro-steps
-    attributes:
-      label: "Minimal config with steps on how to reproduce the issue"
-      description: "Note: Issues without any information will be closed directly"
-      placeholder: |
-        This is my custom config (`specs.lua`):
-        ```lua
-        return {
-          popup = {
-            delay_ms = 20,
-          }
-        }
-        ```
-
-        Steps to reproduce the behavior:
-        1. Go to '...'
-        2. Click on '....'
-        3. Scroll down to '....'
-        4. See error
-    validations:
-      required: true
-
-  - type: textarea
-    id: expected-behavior
-    attributes:
-      label: "Expected behavior"
-      description: "Describe the behavior you expect"
-    validations:
-      required: true
-  - type: textarea
-    id: extras
-    attributes:
-      label: Additional information
-      description: If applicable, you may include logs, images, or videos to help explain your problem
-    validations:
-      required: false

nvim/.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,22 +0,0 @@
-name: Feature Request
-description: Request an enhancement for this project
-labels: [enhancement]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        _Before requesting:_ Search [existing issues](https://github.com/ayamir/nvimdots/labels/enhancement) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
-
-  - type: textarea
-    id: feat-desc
-    attributes:
-      label: "Feature description"
-    validations:
-      required: true
-  - type: textarea
-    id: extras
-    attributes:
-      label: "Additional information"
-      description: "If applicable, you may include images or videos to help explain your request"
-    validations:
-      required: false

nvim/.github/ISSUE_TEMPLATE/lsp_issue_report.yml

@@ -1,148 +0,0 @@
-name: LSP Issue
-description: File a bug report related to LSPs
-labels: [bug, lsp]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        _Before reporting:_ Search [existing issues](https://github.com/ayamir/nvimdots/issues) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
-        > [!IMPORTANT]
-        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
-  - type: checkboxes
-    id: is-latest-commit
-    attributes:
-      label: "Version confirmation"
-      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
-      options:
-        - label: "Confirm"
-          required: true
-  - type: checkboxes
-    id: prerequisites-done
-    attributes:
-      label: "Following prerequisites"
-      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
-      options:
-        - label: "Confirm"
-          required: true
-  - type: checkboxes
-    id: not-user-config-issue
-    attributes:
-      label: "Not a user config issue"
-      description: "This issue _persists_ after removing ALL user configs. If this is not the case, you should open a [Custom (User) Config Issue](https://github.com/ayamir/nvimdots/issues/new?assignees=&labels=usage&projects=&template=custom_config.yml) instead."
-      options:
-        - label: "Confirm"
-          required: true
-
-  - type: input
-    id: nvim-version
-    attributes:
-      label: "Neovim version"
-      description: "Paste the output of `nvim --version` here"
-      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
-    validations:
-      required: true
-  - type: input
-    id: system-version
-    attributes:
-      label: "Operating system/version"
-      placeholder: "macOS 12.6.1"
-    validations:
-      required: true
-  - type: input
-    id: terminal-version
-    attributes:
-      label: "Terminal name/version"
-      placeholder: "iTerm2 Build 3.4.17"
-    validations:
-      required: true
-  - type: input
-    id: term-env
-    attributes:
-      label: "$TERM environment variable"
-      placeholder: "xterm-256color"
-    validations:
-      required: false
-  - type: dropdown
-    id: branch
-    attributes:
-      label: "Branch info"
-      description: "Which branch are you currently on? If you are not sure, check the output of `git rev-parse --abbrev-ref HEAD`"
-      options:
-        - main (Default/Latest)
-        - 0.9 (Legacy)
-        - 0.8 (Deprecated)
-        - 0.11 (Nightly)
-    validations:
-      required: true
-  - type: dropdown
-    id: fetch-pref
-    attributes:
-      label: "Fetch Preferences"
-      description: "In what way do you fetch resources? If you are not sure, check the value of `use_ssh` in `lua/user/settings.lua`"
-      options:
-        - SSH (use_ssh = true)
-        - HTTPS (use_ssh = false)
-    validations:
-      required: true
-  - type: input
-    id: servers
-    attributes:
-      label: "Affected language servers"
-      description: "If this issue is specific to one or more language servers, list them here. If not, write `any`"
-      placeholder: "lua-language-server, clangd"
-    validations:
-      required: true
-
-  - type: textarea
-    id: repro-steps
-    attributes:
-      label: "How to reproduce the issue"
-      description: "Note: Issues without any information will be closed directly"
-      placeholder: |
-        Steps to reproduce the behavior:
-        1. Go to '...'
-        2. Click on '....'
-        3. Scroll down to '....'
-        4. See error
-    validations:
-      required: true
-
-  - type: textarea
-    id: actual-behavior
-    attributes:
-      label: "Actual behavior"
-      description: "Briefly describe what you've observed"
-    validations:
-      required: true
-  - type: textarea
-    id: expected-behavior
-    attributes:
-      label: "Expected behavior"
-      description: "Describe the behavior you expect"
-    validations:
-      required: false
-  - type: textarea
-    id: support-info
-    attributes:
-      label: "Support info"
-      description: "Plase include information (screenshots) from `:LspInfo` and `:Mason`"
-      placeholder: |
-        :LspInfo
-        :Mason
-    validations:
-      required: true
-  - type: textarea
-    id: lsp-logs
-    attributes:
-      label: "Logs"
-      description: "Please copy and paste any relevant log output (e.g., `${HOME}/.local/state/nvim/lsp.log` and `${HOME}/.cache/nvim/lsp.log`). This section will be automatically formatted"
-      render: console
-    validations:
-      required: false
-  - type: textarea
-    id: extras
-    attributes:
-      label: "Additional information"
-      description: "If applicable, you may include images or videos to help explain your problem"
-    validations:
-      required: false

nvim/.github/workflows/lint_code.yml

@@ -1,11 +0,0 @@
-name: lint code
-on: [push, pull_request]
-
-jobs:
-  luacheck:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - uses: lunarmodules/luacheck@v1
-        with:
-          args: . --std luajit --globals vim _debugging _command_panel _flash_esc_or_noh _telescope_collections _toggle_lazygit --max-line-length 150 --no-config

nvim/.github/workflows/style_check.yml

@@ -1,13 +0,0 @@
-name: style check
-on: [push, pull_request]
-
-jobs:
-  stylua:
-    runs-on: ubuntu-latest
-    steps:
-      - uses: actions/checkout@v4
-      - uses: JohnnyMorganz/stylua-action@v4
-        with:
-          token: ${{ secrets.GITHUB_TOKEN }}
-          version: latest
-          args: --check --config-path=stylua.toml .

nvim/.github/workflows/update_flake.yml

@@ -1,26 +0,0 @@
-name: update flake.lock
-on:
-  # Scheduled update (1st of every month)
-  schedule: [{ cron: "30 02 1 * *" }]
-
-jobs:
-  update-lockfile:
-    if: github.repository_owner == 'ayamir'
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/checkout@v4
-      - uses: cachix/install-nix-action@v26
-        with:
-          nix_path: nixpkgs=channel:nixos-unstable
-      - name: Run flake-update
-        run: |
-          nix flake update
-      - uses: stefanzweifel/git-auto-commit-action@v5
-        with:
-          commit_message: "chore(lockfile): auto update flake.lock"
-          commit_user_name: "github-actions[bot]"
-          commit_user_email: "41898282+github-actions[bot]@users.noreply.github.com"
-          commit_author: "github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>"
-          file_pattern: "flake.lock"

nvim/.github/workflows/update_lockfile.yml

@@ -1,41 +0,0 @@
-name: update lockfile
-on:
-  # Scheduled update (each day)
-  schedule: [{ cron: "30 01 * * *" }]
-
-jobs:
-  update-lockfile:
-    if: github.repository_owner == 'ayamir'
-    runs-on: ubuntu-latest
-    permissions:
-      contents: write
-    steps:
-      - uses: actions/checkout@v4
-        with:
-          fetch-depth: 0 # Required to count the commits
-      - uses: andstor/file-existence-action@v3
-        id: check_lockfile
-        with:
-          files: "lazy-lock.json"
-      - name: Run count-new-commits
-        run: |
-          echo "NEW_COMMIT_COUNT=$(git log --oneline --since '24 hours ago' --perl-regexp --author='^((?!github-actions).*)$' | wc -l)" >> "$GITHUB_ENV"
-      - uses: rhysd/action-setup-vim@v1
-        if: ${{ steps.check_lockfile.outputs.files_exists == 'true' && env.NEW_COMMIT_COUNT > 0 }}
-        with:
-          neovim: true
-      - name: Run lockfile-autoupdate
-        if: ${{ steps.check_lockfile.outputs.files_exists == 'true' && env.NEW_COMMIT_COUNT > 0 }}
-        timeout-minutes: 5
-        run: |
-          ./scripts/install.sh
-          nvim --headless "+Lazy! update" +qa
-          cp -pv "${HOME}/.config/nvim/lazy-lock.json" .
-      - uses: stefanzweifel/git-auto-commit-action@v5
-        if: ${{ steps.check_lockfile.outputs.files_exists == 'true' && env.NEW_COMMIT_COUNT > 0 }}
-        with:
-          commit_message: "chore(lockfile): auto update lazy-lock.json"
-          commit_user_name: "github-actions[bot]"
-          commit_user_email: "41898282+github-actions[bot]@users.noreply.github.com"
-          commit_author: "github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>"
-          file_pattern: "lazy-lock.json"

nvim/.gitignore

@@ -1,4 +0,0 @@
-lua/modules/plugins/custom.lua
-lua/modules/configs/custom
-lua/user
-result