Merge branch 'upstream-custom' into dev

merge hidpi support

.bashrc

@@ -109,7 +109,7 @@ alias setkb='setxkbmap de;echo "Keyboard set back to de."'
 alias res1='xrandr --output DisplayPort-0 --mode 2560x1440 --rate 120'
 alias res2='xrandr --output DisplayPort-0 --mode 1920x1080 --rate 120'
 
-export PATH="/usr/lib/ccache/bin/:$PATH"
+export PATH="$HOME/.local/bin/:/usr/lib/ccache/bin/:$PATH"
 
 # -----------------------------------------------------
 # DEVELOPMENT

.install/cleanup.sh

@@ -13,24 +13,6 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
-# Check for running NetworkManager.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
-    echo ":: NetworkManager.service already running."
-else
-    sudo systemctl enable NetworkManager.service
-    sudo systemctl start NetworkManager.service
-    echo ":: NetworkManager.service activated successfully."    
-fi
-
-# Check for running bluetooth.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
-    echo ":: bluetooth.service already running."
-else
-    sudo systemctl enable bluetooth.service
-    sudo systemctl start bluetooth.service
-    echo ":: bluetooth.service activated successfully."    
-fi
-
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/fcitx5.sh

@@ -0,0 +1,24 @@
+# ------------------------------------------------------
+# Select fcitx5 or not
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "fcitx5"
+echo -e "${NONE}"
+
+if gum confirm "Do you want to install fcitx5 and chinese input method?" ;then
+    packagesPacman=(
+        "fcitx5"
+        "fcitx5-chinese-addons"
+        "fcitx5-configtool"
+        "fcitx5-gtk"
+        "fcitx5-qt"
+    );
+    packagesYay=(
+        "fcitx5-skin-seasons"
+    );
+    source .install/install-packages.sh
+    echo -e "\n# -----------------------------------------------------" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "# fcitx5 support" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "# -----------------------------------------------------" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "source = ~/dotfiles/hypr/conf/fcitx5.conf" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+fi

.install/fish.sh

@@ -0,0 +1,6 @@
+# ------------------------------------------------------
+# install fish
+# ------------------------------------------------------
+packagesPacman=("fish");
+packagesYay=();
+source .install/install-packages.sh

.install/hidpi.sh

@@ -0,0 +1,21 @@
+
+# ------------------------------------------------------
+# hidpi support
+# ------------------------------------------------------
+
+echo -e "${GREEN}"
+figlet "hidpi"
+echo -e "${NONE}"
+
+hidpiconfirm="Do you want 2x hidpi scale?"
+if gum confirm "$hidpiconfirm"; then
+    sed -i -E 's/size = [0-9]+(\.[0-9]+)?/size = 16/' ~/dotfiles-versions/$version/alacritty/alacritty.toml
+    sed -i -E 's/[0-9]+(\.[0-9]+)?/16/' ~/dotfiles-versions/$version/.settings/rofi-font.rasi
+    echo -e '\n# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# HiDPI Scaling' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e 'source = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    sed -i -E 's/1/2/' ~/dotfiles-versions/$version/hypr/conf/monitors/default.conf
+    #sed -i -E 's/24/32/' ~/dotfiles-versions/$version/hypr/conf/cursor.conf
+    echo ":: finished hidpi patch."
+fi

.install/hyprland-dotfiles.sh

@@ -5,6 +5,9 @@
 if [ -d ~/dotfiles-versions/$version/alacritty ]; then
     _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/kitty ]; then
+    _installSymLink kitty ~/.config/kitty ~/dotfiles/kitty/ ~/.config
+fi
 if [ -d ~/dotfiles-versions/$version/vim ]; then
     _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
 fi
@@ -43,5 +46,15 @@ fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
     _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
 fi
+if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
+    _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
+fi
+if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
+    if [ ! -d ~/.local/share/icons ]; then mkdir -pv ~/.local/share/icons; fi
+    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors ~/.local/share/icons/
+fi
+if [ -d ~/dotfiles-versions/$version/ranger ]; then
+    _installSymLink ranger ~/.config/ranger ~/dotfiles/ranger/ ~/.config
+fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -1,65 +1,59 @@
 packagesPacman=(
     "pacman-contrib"
     "vim"
-    "bluez"
-    "bluez-utils"
+    "bat"
+    "fzf"
+    "zsh"
+    "fastfetch"
+    "ranger"
+    "btop"
     "neovim"
     "wget"
     "unzip"
-    "alacritty" 
-    "chromium" 
-    "dunst" 
+    "alacritty"
+    "dunst"
     "starship"
-    "mpv" 
+    "mpv"
     "thunar"
-    "nautilus" 
-    "mousepad"
-    "noto-fonts" 
-    "otf-font-awesome" 
-    "ttf-fira-sans" 
-    "ttf-fira-code" 
-    "ttf-firacode-nerd" 
-    "figlet" 
-    "vlc" 
-    "eza" 
-    "python-pip" 
-    "python-psutil" 
-    "python-rich" 
-    "python-click" 
+    "nautilus"
+    "noto-fonts"
+    "otf-font-awesome"
+    "ttf-fira-sans"
+    "ttf-fira-code"
+    "ttf-firacode-nerd"
+    "ttf-firacode-nerd"
+    "figlet"
+    "vlc"
+    "eza"
+    "python-pip"
+    "python-psutil"
+    "python-rich"
     "python-pywal"
-    "python-gobject"
-    "pavucontrol" 
-    "tumbler" 
+    "pavucontrol"
+    "tumbler"
     "papirus-icon-theme"
-    "breeze-icons"
-    "polkit-gnome"
-    "brightnessctl"
     "gum"
     "man-pages"
-    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
-    "xdg-desktop-portal-gtk"
-    "networkmanager"
-    "network-manager-applet"
+#    "xdg-desktop-portal-gtk"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
-    "gtk4"
-    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
-    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
-    "blueman"
+    "pipewire-pulse"
+    "wireplumber"
 );
 
 packagesYay=(
-    "bibata-cursor-theme" 
+    "vimix-cursors"
+    "orchis-theme"
     "trizen"
-    "pacseek"
+    "google-chrome"
 );

.install/packages/hyprland-packages.sh

@@ -3,17 +3,19 @@ packagesPacman=(
     "hyprpaper"
     "hyprlock"
     "hypridle"
-    "xdg-desktop-portal-hyprland" 
-    "waybar" 
-    "grim" 
+    #    "xdg-desktop-portal-hyprland"
+    "waybar"
+    "grim"
     "slurp"
     "swappy"
     "cliphist"
-);
+    "kitty"
+)
 
 packagesYay=(
+    "pyprland"
     "wlogout"
     "nwg-look"
     "eww"
     "hyprshade"
-);
+)

.install/qtile-dotfiles.sh

@@ -35,4 +35,7 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
+    _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
+fi
 echo ":: Symbolic links created."

.install/restore.sh

@@ -14,6 +14,14 @@ _showRestoreOptions() {
         restorelist+="~/dotfiles/.bashrc "
         selectedlist+="~/dotfiles/.bashrc,"
     fi
+    if [ -f ~/dotfiles/.zshrc ]; then
+        restorelist+="~/dotfiles/.zshrc "
+        selectedlist+="~/dotfiles/.zshrc,"
+    fi
+    if [ -f ~/dotfiles/.p10k.zsh ]; then
+        restorelist+="~/dotfiles/.p10k.zsh "
+        selectedlist+="~/dotfiles/.p10k.zsh,"
+    fi
     if [ -d ~/dotfiles/.settings ]; then
         restorelist+="~/dotfiles/.settings "
         selectedlist+="~/dotfiles/.settings,"
@@ -24,7 +32,7 @@ _showRestoreOptions() {
             then
                 restorelist+="~/dotfiles/hypr/hypridle.conf "
                 selectedlist+="~/dotfiles/hypr/hypridle.conf,"
-            fi        
+            fi
         fi
         if [ -f ~/dotfiles/hypr/conf/custom.conf ]; then
             restorelist+="~/dotfiles/hypr/conf/custom.conf "
@@ -75,13 +83,13 @@ _showRestoreOptions() {
     fi
     restoreselect=$(gum choose --no-limit --height 20 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " --selected="$selectedlist" $restorelist)
     if [ ! -z "$restoreselect" ] ;then
-        echo "Selected to restore:" 
+        echo "Selected to restore:"
         echo "$restoreselect"
         echo ""
         confirmrestore=$(gum choose "Start restore" "Change restore" "Skip restore")
         if [ "$confirmrestore" == "Start restore" ] ;then
             _startRestore
-        elif [ "$confirmrestore" == "Change restore" ]; then 
+        elif [ "$confirmrestore" == "Change restore" ]; then
             _showRestoreOptions
         else
             echo ":: Restore skipped."
@@ -94,7 +102,7 @@ _showRestoreOptions() {
             echo ":: Installation canceled."
             exit
         fi
-        if [ "$confirmrestore" == "Change restore" ]; then 
+        if [ "$confirmrestore" == "Change restore" ]; then
             echo ""
             _showRestoreOptions
         else
@@ -135,11 +143,11 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/keyboard.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland keyboard.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/monitor.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/monitor.conf ]; then
                 cp ~/dotfiles/hypr/conf/monitor.conf ~/dotfiles-versions/$version/hypr/conf/
-                echo ":: Hyprland monitor.conf restored!"                
+                echo ":: Hyprland monitor.conf restored!"
             fi
         fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/keybinding.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
@@ -153,19 +161,19 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/environment.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland environment.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/layout.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/layout.conf ]; then
                 cp ~/dotfiles/hypr/conf/layout.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland layout.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/windowrule.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/windowrule.conf ]; then
                 cp ~/dotfiles/hypr/conf/windowrule.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland windowrule.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/animation.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/animation.conf ]; then
                 cp ~/dotfiles/hypr/conf/animation.conf ~/dotfiles-versions/$version/hypr/conf/

.install/wallpaper.sh

@@ -5,16 +5,17 @@ echo -e "${GREEN}"
 figlet "Wallpapers"
 echo -e "${NONE}"
 if [ ! -d ~/wallpaper ]; then
-    echo "Do you want to download the wallpapers from repository https://gitlab.com/stephan-raabe/wallpaper/ ?"
+    echo "Do you want to download the wallpapers from repository https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ?"
     echo "If not, the script will install 3 default wallpapers in ~/wallpaper/"
     echo ""
     if gum confirm "Do you want to download the repository?" ;then
-        wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
-        unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
-        if [ ! -d ~/wallpaper/ ]; then
-            mkdir ~/wallpaper
-        fi
-        cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        # wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
+        # unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
+        # if [ ! -d ~/wallpaper/ ]; then
+        #     mkdir ~/wallpaper
+        # fi
+        # cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        git clone https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ~/wallpaper
         echo "Wallpapers from the repository installed successfully."
     elif [ $? -eq 130 ]; then
         exit 130

.install/zsh.sh

@@ -0,0 +1,22 @@
+# ------------------------------------------------------
+# install zsh and zinit
+# ------------------------------------------------------
+packagesPacman=("zsh");
+
+echo "Please select the zsh plugin manager:"
+zsh_manager=$(gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "oh my zsh" "zinit")
+if [[ "${zsh_manager}" == *"oh my zsh"* ]]; then
+    source .install/install-packages.sh
+    if [ ! -d ~/.oh-my-zsh ]; then
+        RUNZSH=no CHSH=no sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
+    fi
+    git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
+    git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
+    git clone https://github.com/zdharma-continuum/fast-syntax-highlighting.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/fast-syntax-highlighting
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_ohmyzsh ~/.zshrc
+else
+    packagesYay=("zinit");
+    source .install/install-packages.sh
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_zinit ~/.zshrc
+fi
+_installSymLink p10k ~/.p10k.zsh ~/dotfiles/.p10k.zsh ~/

.install/zshfish.sh

@@ -0,0 +1,25 @@
+# ------------------------------------------------------
+# Select additional shell
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "Zsh Fish"
+echo -e "${NONE}"
+echo "Please select if you want to install zsh or fish."
+echo
+zshfish=$(gum choose --no-limit --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "zsh" "fish")
+
+if [ -z "${zshfish}" ] ;then
+    echo ":: No shell selected. Keep using bash."
+else
+    echo "Please select your default shell."
+	echo
+	shell=$(echo -e "bash\n$zshfish" | gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) ")
+    if [[ $zshfish == *"zsh"* ]]; then
+		echo ":: zsh selected"
+		source .install/zsh.sh
+	fi
+	if [[ $zshfish == *"fish"* ]]; then
+		echo ":: fish selected"
+		source .install/fish.sh
+	fi
+fi

.settings/browser.sh

@@ -1 +1 @@
-chromium
+google-chrome-stable

.settings/editor.sh

@@ -1 +1 @@
-mousepad
+~/dotfiles/.settings/terminal.sh -e vim

.settings/networkmanager.sh

@@ -1 +0,0 @@
-nm-connection-editor

.settings/rofi-border-radius.rasi

@@ -0,0 +1,3 @@
+* {
+    border-radius:  15px;
+}

.settings/rofi-border.rasi

@@ -1 +1,3 @@
-* { border-width: 3px; }
+* {
+    border-width:   2px;
+}

.settings/software.sh

@@ -1 +0,0 @@
-alacritty -e pacseek

.settings/terminal.sh

@@ -1 +1 @@
-alacritty
+kitty

.zshrc_ohmyzsh

@@ -0,0 +1,88 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# -----------------------------------------------------
+# Oh my zsh settings
+# -----------------------------------------------------
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# ZSH_THEME="robbyrussell"
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+zstyle ':omz:update' mode auto
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+COMPLETION_WAITING_DOTS="true"
+
+# -----------------------------------------------------
+# Plugins
+# -----------------------------------------------------
+plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# -----------------------------------------------------
+# Variables
+# -----------------------------------------------------
+export PATH=$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+# export MANPATH="/usr/local/man:$MANPATH"
+
+export LANG=en_US.UTF-8
+
+export EDITOR='nvim'
+
+export MAKEFLAGS='-j$(nproc)'
+export CFLAGS='-march=native -O2 -pipe'
+
+# -----------------------------------------------------
+# Alias
+# -----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias ls="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+alias code="code --ozone-platform=wayland --enable-wayland-ime"
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# -----------------------------------------------------
+# Completion
+# -----------------------------------------------------
+[[ -f /home/wyj/.dart-cli-completion/zsh-config.zsh ]] && . /home/wyj/.dart-cli-completion/zsh-config.zsh || true
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh
+
+# -----------------------------------------------------
+# miscs
+# -----------------------------------------------------
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.zshrc_zinit

@@ -0,0 +1,64 @@
+# ---------------------------------------------------
+# Zinit and plugins
+# ---------------------------------------------------
+source /usr/share/zinit/zinit.zsh
+
+# Load powerlevel10k theme
+zinit ice depth"1" # git clone depth
+zinit light romkatv/powerlevel10k
+
+# Load plugins
+zinit light zsh-users/zsh-autosuggestions
+zinit light zdharma-continuum/fast-syntax-highlighting
+# oh-my-zsh plugins
+zi snippet OMZL::git.zsh
+zi snippet OMZP::git
+zi snippet OMZP::sudo
+zi snippet OMZP::colored-man-pages
+zi snippet OMZP::eza
+zi snippet OMZP::z
+# others
+zplugin ice as"program" pick"bin/git-dsf"
+zplugin light zdharma-continuum/zsh-diff-so-fancy
+
+# ----------------------------------------------------
+# Variables
+# ----------------------------------------------------
+export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+export EDITOR=vim
+
+# ----------------------------------------------------
+# Alias
+# ----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias eza="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# Miscs
+# -----------------------------------------------------
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh

Vimix-hyprcursors/manifest.hl

@@ -0,0 +1,4 @@
+name = Extracted Theme
+description = Automatically extracted with hyprcursor-util
+version = 0.1
+cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -1,5 +1,5 @@
 [font]
-size = 12.0
+size = 16.0
 
 [font.normal]
 family = "FiraCode Nerd Font"
@@ -9,5 +9,8 @@ style = "Regular"
 opacity = 0.7
 
 [window.padding]
-x = 15
-y = 15
+x = 0
+y = 0
+
+[selection]
+save_to_clipboard = true

chrome-flags.conf

@@ -0,0 +1 @@
+--ozone-platform=wayland --enable-wayland-ime

fastfetch/config.jsonc

@@ -1,110 +1,181 @@
-//  Thanks to Bina
+// Note that you must replace the image path to an existing image to display it.
 {
-  "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-  "logo": {
-      "padding": {
-      "top": 2
-      }
-  },
-  "display": {
-        "separator": " ➜  "
-  },
-  "modules": [
-      "break",
-      "break",
-      "break",
-       {
-          "type": "os",
-          "key": "OS   ",
-          "keyColor": "31",  // = color1
-      },
-      {
-          "type": "kernel",
-          "key": " ├  ",
-          "keyColor": "31",
-      },
-      {
-          "type": "packages",
-          "format": "{} (pacman)",
-          "key": " ├ 󰏖 ",
-          "keyColor": "31",  
-      },
-      {
-          "type": "shell",
-          "key": " └  ",
-          "keyColor": "31", 
-      },
-      "break",
-      {
-          "type": "wm",
-          "key": "WM   ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "wmtheme",
-          "key": " ├ 󰉼 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "icons",
-          "key": " ├ 󰀻 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "cursor",
-          "key": " ├  ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "terminal",
-          "key": " ├  ",
-          "keyColor": "32",
-      },
-      {
-          "type": "terminalfont",
-          "key": " └  ",
-          "keyColor": "32", 
-      },
-      "break",
-      {
-          "type": "host",
-          "format": "{5} {1} Type {2}",
-          "key": "PC   ",
-          "keyColor": "33",
-      },
-      {
-          "type": "cpu",
-          "format": "{1} ({3}) @ {7} GHz",
-          "key": " ├  ",
-          "keyColor": "33",
-      },
-      {
-          "type": "gpu",
-          "format": "{1} {2} @ {12} GHz",            
-          "key": " ├ 󰢮 ",
-          "keyColor": "33",
-      },
-      {
-          "type": "memory",
-          "key": " ├  ",
-          "keyColor": "33",
-      },
-      {
-          "type": "swap",
-          "key": " ├ 󰓡 ",
-          "keyColor": "33",
-      },
-      {
-          "type": "disk",
-          "key": " ├ 󰋊 ",
-          "keyColor": "33",
-      },
-      {
-          "type": "monitor",
-          "key": " └  ",
-          "keyColor": "33",
-      },
-      "break",
-      "break",
-  ]
-}
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    // "logo": {
+    //     "type": "iterm",
+    //     "source": "/Users/carter/Desktop/apple1.png",
+    //     "width": 28,
+    //     "height": 12
+    // },
+    "display": {
+        //    "separator": "  "
+        "separator": " "
+    },
+    "modules": [
+        {
+            "type": "host",
+            "key": "╭─󰌢",
+            "keyColor": "green"
+        },
+        {
+            "type": "cpu",
+            "key": "├─󰻠",
+            "keyColor": "green"
+        },
+        {
+            "type": "gpu",
+            "key": "├─󰍛",
+            "keyColor": "green"
+        },
+        {
+            "type": "disk",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "memory",
+            "key": "├─󰑭",
+            "keyColor": "green"
+        },
+        {
+            "type": "swap",
+            "key": "├─󰓡",
+            "keyColor": "green"
+        },
+        {
+            "type": "display",
+            "key": "├─󰍹",
+            "keyColor": "green"
+        },
+        {
+            "type": "battery",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "poweradapter",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "gamepad",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "bluetooth",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "sound",
+            "key": "╰─",
+            "keyColor": "green"
+        },
+        "break",
+        {
+            "type": "shell",
+            "key": "╭─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminal",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "editor",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminalfont",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "lm",
+            "key": "├─󰧨",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "de",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "wm",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "theme",
+            "key": "├─󰉼",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "icons",
+            "key": "╰─󰀻",
+            "keyColor": "yellow"
+        },
+        "break",
+        {
+            "type": "title",
+            "key": "╭─",
+            "format": "{1}@{2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "os",
+            "key": "├─󰣇", // Just get your distro's logo off nerdfonts.com
+            "keyColor": "blue"
+        },
+        {
+            "type": "kernel",
+            "key": "├─",
+            "format": "{1} {2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "packages",
+            "key": "├─󰏖",
+            "keyColor": "blue"
+        },
+        {
+            "type": "uptime",
+            "key": "├─󰅐",
+            "keyColor": "blue"
+        },
+        {
+            "type": "media",
+            "key": "├─󰝚",
+            "keyColor": "blue"
+        },
+        {
+            "type": "cpuusage",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "loadavg",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "processes",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "localip",
+            "key": "╰─󰩟",
+            "compact": true,
+            "keyColor": "blue"
+        },
+        "break",
+        {
+            "type": "custom",
+            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻 "
+        }
+    ]
+}

hypr/conf/animation.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/animations/default.conf
+source = ~/dotfiles/hypr/conf/animations/animations-high.conf

hypr/conf/autostart.conf

@@ -29,8 +29,8 @@ exec-once = ~/dotfiles/hypr/scripts/ml4w-welcome-autostart.sh
 # Start ewww daemon
 exec-once = ~/dotfiles/hypr/scripts/eww.sh
 
+exec-once = pypr
+
+
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
-
-# Load configuration from ML4W Hyprland Settings App
-exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1 +1,2 @@
-exec-once = hyprctl setcursor Bibata-Modern-Ice 24
+exec-once = hyprctl setcursor Vimix-hyprcursors 32
+env = HYPRCURSOR_THEME,Vimix-hyprcursors

hypr/conf/decoration.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/decorations/default.conf
+source = ~/dotfiles/hypr/conf/decorations/custom.conf

hypr/conf/decorations/custom.conf

@@ -0,0 +1,31 @@
+# ----------------------------------------------------- 
+# General window decoration
+# name: "Default"
+# ----------------------------------------------------- 
+
+decoration {
+    rounding = 10
+    blur {
+        enabled = true
+        size = 10
+        passes = 3
+        new_optimizations = on
+        ignore_opacity = true
+        xray = false
+        blurls = waybar
+    }
+    active_opacity = 1.0
+    inactive_opacity = 0.8
+    fullscreen_opacity = 1.0
+
+    shadow {
+        enabled = true
+        range = 30
+        render_power = 3
+        color = 0x66000000
+    }
+    #drop_shadow = true
+    #shadow_range = 30
+    #shadow_render_power = 3
+    #col.shadow = 0x66000000
+}

hypr/conf/environments/default.conf

@@ -6,7 +6,7 @@
 env = XDG_SESSION_TYPE,wayland
 env = XDG_SESSION_DESKTOP,Hyprland
 env = QT_QPA_PLATFORM,wayland
+env = QT_QPA_PLATFORMTHEME,qt6ct
 env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
 env = QT_AUTO_SCREEN_SCALE_FACTOR,1
 env = MOZ_ENABLE_WAYLAND,1
-env = GDK_SCALE,1

hypr/conf/fcitx5.conf

@@ -0,0 +1,7 @@
+exec-once = fcitx5-remote -r
+exec-once = fcitx5 -d --replace
+exec-once = fcitx5-remote -r
+
+bind=$mainMod CTRL, E, exec, pkill fcitx5 -9;sleep 1;fcitx5 -d --replace; sleep 1;fcitx5-remote -r
+
+env=QT_IM_MODULE,fcitx

hypr/conf/hidpi.conf

@@ -0,0 +1,6 @@
+xwayland {
+  force_zero_scaling = true
+}
+
+env = GDK_SCALE,2
+env = QT_AUTO_SCREEN_SCALE_FACTOR,1

hypr/conf/keybinding.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/keybindings/default.conf
+source = ~/dotfiles/hypr/conf/keybindings/custom.conf

hypr/conf/keybindings/custom.conf

@@ -0,0 +1,104 @@
+# -----------------------------------------------------
+# Key bindings
+# name: "Default"
+# -----------------------------------------------------
+
+# SUPER KEY
+$mainMod = SUPER
+
+# Applications
+bind = $mainMod, RETURN, exec, ~/dotfiles/.settings/terminal.sh
+bind = $mainMod, B, exec, ~/dotfiles/.settings/browser.sh
+bind = $mainMod SHIFT, E, exec, emote
+
+# Windows
+bind = $mainMod, Q, killactive
+bind = $mainMod, F, fullscreen
+bind = $mainMod SHIFT, F, fullscreen, 1
+bind = $mainMod CTRL SHIFT, F, fullscreen, 2
+bind = $mainMod ALT, F, fakefullscreen
+bind = $mainMod, E, exec, ~/dotfiles/.settings/filemanager.sh
+bind = $mainMod, T, togglefloating
+bind = $mainMod SHIFT, T, exec, ~/dotfiles/hypr/scripts/toggleallfloat.sh
+bind = $mainMod, J, togglesplit
+bind = $mainMod, left, movefocus, l
+bind = $mainMod, right, movefocus, r
+bind = $mainMod, up, movefocus, u
+bind = $mainMod, down, movefocus, d
+bindm = $mainMod, mouse:272, movewindow
+bindm = $mainMod, mouse:273, resizewindow
+bind = $mainMod SHIFT, right, resizeactive, 100 0
+bind = $mainMod SHIFT, left, resizeactive, -100 0
+bind = $mainMod SHIFT, up, resizeactive, 0 -100
+bind = $mainMod SHIFT, down, resizeactive, 0 100
+bind = $mainMod, G, togglegroup
+bind = $mainMod CTRL, Tab, changegroupactive, f
+
+# Actions
+bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh
+bind = $mainMod CTRL, Q, exec, wlogout
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select
+bind = $mainMod, SPACE, exec, rofi -show drun -replace -i
+bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh
+bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh
+bind = $mainMod CTRL, B, exec, ~/dotfiles/waybar/toggle.sh
+bind = $mainMod SHIFT, R, exec, ~/dotfiles/hypr/scripts/loadconfig.sh
+bind = $mainMod CTRL, C, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod, V, exec, ~/dotfiles/scripts/cliphist.sh
+bind = $mainMod CTRL, T, exec, ~/dotfiles/waybar/themeswitcher.sh
+bind = $mainMod CTRL, S, exec, ~/dotfiles/apps/ML4W_Dotfiles_Settings-x86_64.AppImage
+bind = $mainMod CTRL, P, exec, hyprpicker -a
+bind = $mainMod SHIFT, S, exec, ~/dotfiles/hypr/scripts/hyprshade.sh
+bind = $mainMod ALT, G, exec, ~/dotfiles/hypr/scripts/gamemode.sh
+
+# Workspaces
+bind = $mainMod, 1, workspace, 1
+bind = $mainMod, 2, workspace, 2
+bind = $mainMod, 3, workspace, 3
+bind = $mainMod, 4, workspace, 4
+bind = $mainMod, 5, workspace, 5
+bind = $mainMod, 6, workspace, 6
+bind = $mainMod, 7, workspace, 7
+bind = $mainMod, 8, workspace, 8
+bind = $mainMod, 9, workspace, 9
+bind = $mainMod, 0, workspace, 10
+bind = $mainMod SHIFT, 1, movetoworkspace, 1
+bind = $mainMod SHIFT, 2, movetoworkspace, 2
+bind = $mainMod SHIFT, 3, movetoworkspace, 3
+bind = $mainMod SHIFT, 4, movetoworkspace, 4
+bind = $mainMod SHIFT, 5, movetoworkspace, 5
+bind = $mainMod SHIFT, 6, movetoworkspace, 6
+bind = $mainMod SHIFT, 7, movetoworkspace, 7
+bind = $mainMod SHIFT, 8, movetoworkspace, 8
+bind = $mainMod SHIFT, 9, movetoworkspace, 9
+bind = $mainMod SHIFT, 0, movetoworkspace, 10
+bind = $mainMod, mouse_down, workspace, e+1
+bind = $mainMod, mouse_up, workspace, e-1
+bind = $mainMod CTRL, down, workspace, empty
+bind = $mainMod CTRL, left, workspace, e-1
+bind = $mainMod CTRL, right, workspace, e+1
+
+# Fn keys
+bind = , XF86MonBrightnessUp, exec, brightnessctl -q s +10%
+bind = , XF86MonBrightnessDown, exec, brightnessctl -q s 10%-
+bind = , XF86AudioRaiseVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ +5% && notify-send -t 400 "Volume: $(pactl get-sink-volume @DEFAULT_SINK@ | awk '/front-left/ {print $5}')"
+bind = , XF86AudioLowerVolume, exec, pactl set-sink-volume @DEFAULT_SINK@ -5% && notify-send -t 400 "Volume: $(pactl get-sink-volume @DEFAULT_SINK@ | awk '/front-left/ {print $5}')"
+bind = , XF86AudioMute, exec, wpctl set-mute @DEFAULT_AUDIO_SINK@ toggle
+bind = , XF86AudioPlay, exec, playerctl play-pause
+bind = , XF86AudioPause, exec, playerctl pause
+bind = , XF86AudioNext, exec, playerctl next
+bind = , XF86AudioPrev, exec, playerctl previous
+bind = , XF86AudioMicMute, exec, pactl set-source-mute @DEFAULT_SOURCE@ toggle
+bind = , XF86Calculator, exec, qalculate-gtk
+bind = , XF86Lock, exec, hyprlock
+bind = , XF86Tools, exec, alacritty --class dotfiles-floating -e ~/dotfiles/hypr/settings/settings.sh
+
+# Passthrough SUPER KEY to Virtual Machine
+bind = $mainMod, P, submap, passthru
+submap = passthru
+bind = SUPER, Escape, submap, reset
+submap = reset
+
+# Pyprland
+bind = $mainMod SHIFT, RETURN, exec, pypr toggle term

hypr/conf/keyboard.conf

@@ -3,15 +3,17 @@
 # https://wiki.hyprland.org/Configuring/Variables/#input
 # -----------------------------------------------------
 input {
-    kb_layout = de
-    kb_variant = 
+    kb_layout = us
+    kb_variant =
     kb_model =
     kb_options =
     numlock_by_default = true
     follow_mouse = 1
     mouse_refocus=false
     touchpad {
-        natural_scroll = false
+        natural_scroll = true
+        disable_while_typing=true
+        tap-to-click=true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }

hypr/conf/layouts/default.conf

@@ -8,9 +8,8 @@ dwindle {
 }
 
 master {
-    new_is_master = true
 }
 
 gestures {
     workspace_swipe = false
-}
+}

hypr/conf/layouts/laptop.conf

@@ -12,5 +12,12 @@ master {
 }
 
 gestures {
-    workspace_swipe = true
+  workspace_swipe=true
+  workspace_swipe_fingers=3
+  workspace_swipe_distance=400
+  workspace_swipe_invert=true
+  workspace_swipe_min_speed_to_force=30
+  workspace_swipe_cancel_ratio=0.5
+  workspace_swipe_create_new=true
+  workspace_swipe_forever=true
 }

hypr/conf/misc.conf

@@ -5,4 +5,7 @@
 misc {
     disable_hyprland_logo = true
     disable_splash_rendering = true
+    enable_swallow = true
+    swallow_regex = ^(Alacritty|kitty|thunar)$
+    font_family = FiraCode Nerd Font
 }

hypr/conf/monitors/4k.conf

@@ -0,0 +1,6 @@
+# ----------------------------------------------------- 
+# Monitor Setup
+# name: "Default"
+# ----------------------------------------------------- 
+
+monitor=,preferred,auto,2

hypr/conf/monitors/dual.conf

@@ -0,0 +1,10 @@
+# ----------------------------------------------------- 
+# Monitor Setup
+# name: "Default"
+# ----------------------------------------------------- 
+
+monitor=DP-1,preferred,0x0,2
+monitor=HDMI-A-1,3840x2160,1920x-275,2,transform,1
+
+workspace=1,monitor:DP-1
+exec-once=hyprctl dispatch workspace 1

hypr/conf/windowrule.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/windowrules/default.conf
+source = ~/dotfiles/hypr/conf/windowrules/custom.conf

hypr/conf/windowrules/custom.conf

@@ -0,0 +1,24 @@
+# -----------------------------------------------------
+# Window rules
+# -----------------------------------------------------
+
+windowrule = tile,^(Microsoft-edge)$
+windowrule = tile,^(Brave-browser)$
+windowrule = tile,^(Chromium)$
+windowrule = float,^(pavucontrol)$
+windowrule = float,^(blueman-manager)$
+windowrule = float,^(nm-connection-editor)$
+windowrule = float,^(qalculate-gtk)$
+windowrule = float,^(showmethekey-gtk)$
+windowrule = pin,^(showmethekey-gtk)$
+layerrule = blur, gtk-layer-shell
+layerrule = blur, logout_dialog
+
+windowrule = float,title:^(Mathematica)$
+windowrule = opacity 0.75, ^(Code)$
+windowrule = opacity 0.75, ^(code-oss)$
+windowrule = opacity 0.75, ^(code-url-handler)$
+windowrule = float,^(QQ)$
+windowrule = float,^(wechat)$
+windowrule = float,^(fdm)$
+windowrule = float,^(xdg-desktop-portal-gtk)$

hypr/conf/windows/default.conf

@@ -6,8 +6,17 @@
 general {
     gaps_in = 10
     gaps_out = 14
-    border_size = 3
+    border_size = 2
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
 }
+
+group {
+    col.border_active = $color11
+    col.border_inactive = rgba(ffffffff)
+    groupbar {
+        col.active = $color11
+        col.inactive = $color13
+    }
+}

hypr/hyprland.conf

@@ -1,48 +1,48 @@
-#  _   _                  _                 _  
-# | | | |_   _ _ __  _ __| | __ _ _ __   __| | 
-# | |_| | | | | '_ \| '__| |/ _` | '_ \ / _` | 
-# |  _  | |_| | |_) | |  | | (_| | | | | (_| | 
-# |_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_| 
-#        |___/|_|                              
-#  
-# ----------------------------------------------------- 
+#  _   _                  _                 _
+# | | | |_   _ _ __  _ __| | __ _ _ __   __| |
+# | |_| | | | | '_ \| '__| |/ _` | '_ \ / _` |
+# |  _  | |_| | |_) | |  | | (_| | | | | (_| |
+# |_| |_|\__, | .__/|_|  |_|\__,_|_| |_|\__,_|
+#        |___/|_|
+#
+# -----------------------------------------------------
 # IMPORTANT: Don't overwrite ML4W configuration.
 # Create your own custom configuration variation instead.
 # https://gitlab.com/stephan-raabe/dotfiles#hyprland-configuration-variations
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Monitor
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/monitor.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Autostart
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/autostart.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Cursor
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/cursor.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Environment
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/environment.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Keyboard
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/keyboard.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Load pywal color file
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/.cache/wal/colors-hyprland.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Load configuration files
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/window.conf
 source = ~/dotfiles/hypr/conf/decoration.conf
 source = ~/dotfiles/hypr/conf/layout.conf
@@ -50,22 +50,22 @@ source = ~/dotfiles/hypr/conf/misc.conf
 source = ~/dotfiles/hypr/conf/keybinding.conf
 source = ~/dotfiles/hypr/conf/windowrule.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Animation
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/animation.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Custom
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/custom.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # ML4W Configuration
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 source = ~/dotfiles/hypr/conf/ml4w.conf
 
-# ----------------------------------------------------- 
+# -----------------------------------------------------
 # Environment for xdg-desktop-portal-hyprland
-# ----------------------------------------------------- 
-exec-once=dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP
+# -----------------------------------------------------
+exec-once=dbus-update-activation-environment --systemd WAYLAND_DISPLAY XDG_CURRENT_DESKTOP

hypr/pyprland.toml

@@ -0,0 +1,12 @@
+[pyprland]
+
+plugins = [
+  "scratchpads",
+  "magnify",
+]
+
+[scratchpads.term]
+animation = "fromTop"
+command = "alacritty --class alacritty-dropterm"
+class = "alacritty-dropterm"
+size = "75% 60%"

hypr/scripts/gtk.sh

@@ -29,7 +29,7 @@ gsettings set "$gnome_schema" cursor-theme "$cursor_theme"
 gsettings set "$gnome_schema" font-name "$font_name"
 gsettings set "$gnome_schema" color-scheme "prefer-dark"
 
-if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
-    echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
-    hyprctl setcursor $cursor_theme $cursor_size
-fi
+# if [ -f ~/dotfiles/hypr/conf/cursor.conf ] ;then
+#     echo "exec-once = hyprctl setcursor $cursor_theme $cursor_size" > ~/dotfiles/hypr/conf/cursor.conf
+#     hyprctl setcursor $cursor_theme $cursor_size
+# fi

hypr/scripts/screenshot.sh

@@ -42,4 +42,4 @@ case $choice in
         notify-send "Screenshot created and copied to clipboard" "Mode: Fullscreen"
         swappy -f "$DIR$NAME"
     ;;
-esac
+esac

install.sh

@@ -45,6 +45,7 @@ source .install/remove.sh
 source .install/general.sh
 source .install/packages/general-packages.sh
 source .install/install-packages.sh
+source .install/fcitx5.sh
 source .install/profile.sh
 if [[ $profile == *"Hyprland"* ]]; then
     echo -e "${GREEN}"
@@ -61,6 +62,7 @@ if [[ $profile == *"Qtile"* ]]; then
     source .install/install-packages.sh
 fi
 source .install/wallpaper.sh
+source .install/hidpi.sh
 source .install/displaymanager.sh
 source .install/issue.sh
 source .install/restore.sh
@@ -76,6 +78,7 @@ fi
 if [[ $profile == *"Qtile"* ]]; then
     source .install/qtile-dotfiles.sh
 fi
+source .install/zshfish.sh
 source .install/settings.sh
 source .install/apps.sh
 source .install/gtk.sh

kitty/kitty.conf

@@ -0,0 +1,25 @@
+font_family      Fira Code Nerd Font
+font_size        16.0
+bold_font        auto
+italic_font      auto
+bold_italic_font auto
+
+background_opacity 0.7
+
+confirm_os_window_close 0
+
+selection_foreground #000000
+selection_background #F5FBFF
+
+detect_urls    yes
+copy_on_select clipboard
+strip_trailing_spaces smart
+rectangle_select_modifiers ctrl+alt
+terminal_select_modifiers shift
+
+enable_audio_bell no
+
+remember_window_size no
+window_padding_width 5
+
+map ctrl+super+enter    launch --cwd=current

nvim/.github/ISSUE_TEMPLATE/bug_report.yml

@@ -0,0 +1,121 @@
+name: Bug Report
+description: File a bug report
+labels: [bug]
+body:
+  - type: markdown
+    attributes:
+      value: |
+        _Before reporting:_ Search [existing issues](https://github.com/ayamir/nvimdots/issues) and check the [FAQ](https://github.com/ayamir/nvimdots/wiki/Issues). Thank you for helping us improve!
+        > [!IMPORTANT]
+        > The `0.11` branch is intended for nightly Neovim builds and is **not** stable. It typically harbors subtle issues scattered throughout. Therefore, refrain from submitting issues if you happen to encounter them. They will be closed directly unless a viable solution is proposed or included.
+  - type: checkboxes
+    id: is-latest-commit
+    attributes:
+      label: "Version confirmation"
+      description: "The local configuration is up-to-date in the current branch and this issue _persists_."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: prerequisites-done
+    attributes:
+      label: "Following prerequisites"
+      description: "I've checked everything mentioned in [Wiki: Prerequisites](https://github.com/ayamir/nvimdots/wiki/Prerequisites)."
+      options:
+        - label: "Confirm"
+          required: true
+  - type: checkboxes
+    id: not-user-config-issue
+    attributes:
+      label: "Not a user config issue"
+      description: "This issue _persists_ after removing ALL user configs. If this is not the case, you should open a [Custom (User) Config Issue](https://github.com/ayamir/nvimdots/issues/new?assignees=&labels=usage&projects=&template=custom_config.yml) instead."
+      options:
+        - label: "Confirm"
+          required: true
+
+  - type: input
+    id: nvim-version
+    attributes:
+      label: "Neovim version"
+      description: "Paste the output of `nvim --version` here"
+      placeholder: "NVIM v0.11.0-dev-194+g6c7677e5d"
+    validations:
+      required: true
+  - type: input
+    id: system-version
+    attributes:
+      label: "Operating system/version"
+      placeholder: "macOS 12.6.1"
+    validations:
+      required: true
+  - type: input
+    id: terminal-version
+    attributes:
+      label: "Terminal name/version"
+      placeholder: "iTerm2 Build 3.4.17"
+    validations:
+      required: true
+  - type: input
+    id: term-env
+    attributes:
+      label: "$TERM environment variable"
+      placeholder: "xterm-256color"
+    validations:
+      required: false
+  - type: dropdown
+    id: branch
+    attributes:
+      label: "Branch info"
+      description: "Which branch are you currently on? If you are not sure, check the output of `git rev-parse --abbrev-ref HEAD`"
+      options:
+        - main (Default/Latest)
+        - 0.9 (Legacy)
+        - 0.8 (Deprecated)
+        - 0.11 (Nightly)
+    validations:
+      required: true
+  - type: dropdown
+    id: fetch-pref
+    attributes:
+      label: "Fetch Preferences"
+      description: "In what way do you fetch resources? If you are not sure, check the value of `use_ssh` in `lua/user/settings.lua`"
+      options:
+        - SSH (use_ssh = true)
+        - HTTPS (use_ssh = false)
+    validations:
+      required: true
+
+  - type: textarea
+    id: repro-steps
+    attributes:
+      label: "How to reproduce the issue"
+      description: "Note: Issues without any information will be closed directly"
+      placeholder: |
+        Steps to reproduce the behavior:
+        1. Go to '...'
+        2. Click on '....'
+        3. Scroll down to '....'
+        4. See error
+    validations:
+      required: true
+
+  - type: textarea
+    id: expected-behavior
+    attributes:
+      label: "Expected behavior"
+      description: "Describe the behavior you expect"
+    validations:
+      required: true
+  - type: textarea
+    id: actual-behavior
+    attributes:
+      label: "Actual behavior"
+    validations:
+      required: false
+  - type: textarea
+    id: extras
+    attributes:
+      label: Additional information
+      description: If applicable, you may include logs, images, or videos to help explain your problem
+    validations:
+      required: false