update: windowrules for code and wolfram

Reviewed-on: https://gitea.phywyj.dynv6.net/wyj/Hyprland-dotfiles/pulls/4

.bashrc

@@ -109,7 +109,7 @@ alias setkb='setxkbmap de;echo "Keyboard set back to de."'
 alias res1='xrandr --output DisplayPort-0 --mode 2560x1440 --rate 120'
 alias res2='xrandr --output DisplayPort-0 --mode 1920x1080 --rate 120'
 
-export PATH="/usr/lib/ccache/bin/:$PATH"
+export PATH="$HOME/.local/bin/:/usr/lib/ccache/bin/:$PATH"
 
 # -----------------------------------------------------
 # DEVELOPMENT

.install/cleanup.sh

@@ -13,24 +13,6 @@ if [[ $(_isInstalledPacman "ttf-ms-fonts") == 0 ]]; then
     fi
 fi
 
-# Check for running NetworkManager.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "NetworkManager.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "NetworkManager.service" ]];then
-    echo ":: NetworkManager.service already running."
-else
-    sudo systemctl enable NetworkManager.service
-    sudo systemctl start NetworkManager.service
-    echo ":: NetworkManager.service activated successfully."    
-fi
-
-# Check for running bluetooth.service
-if [[ $(systemctl list-units --all -t service --full --no-legend "bluetooth.service" | sed 's/^\s*//g' | cut -f1 -d' ') == "bluetooth.service" ]];then
-    echo ":: bluetooth.service already running."
-else
-    sudo systemctl enable bluetooth.service
-    sudo systemctl start bluetooth.service
-    echo ":: bluetooth.service activated successfully."    
-fi
-
 if [ -d ~/dotfiles/hypr/settings/ ] ;then
     rm -rf ~/dotfiles/hypr/settings
     echo ":: ~/dotfiles/hypr/settings removed."

.install/diagnosis.sh

@@ -19,7 +19,6 @@ if gum confirm "Do you want to run a short system check?" ;then
     _commandExists "wlogout" "wlogout"
     _commandExists "eww" "eww"
     _commandExists "magick" "imagemagick"
-    _commandExists "waypaper" "waypaper"
 
 elif [ $? -eq 130 ]; then
     exit 130

.install/displaymanager.sh

@@ -63,15 +63,10 @@ if [ -z "${dmsel}" ] ;then
 fi
 if [ "$dmsel" == "Install sddm and theme" ] ;then
 
-    if [ -d /usr/share/sddm/themes/sugar-candy/ ] ;then
-        sudo rm -rf /usr/share/sddm/themes/sugar-candy/
-        echo ":: Sugar Candy folder removed"
-    fi
-
     disman=0
     # Try to force the installation of sddm
     echo ":: Install sddm"
-    yay -S --noconfirm sddm sddm-sugar-candy-git --ask 4
+    yay -S --noconfirm sddm --ask 4
 
     # Enable sddm
     if [ -f /etc/systemd/system/display-manager.service ]; then
@@ -79,24 +74,41 @@ if [ "$dmsel" == "Install sddm and theme" ] ;then
     fi
     sudo systemctl enable sddm.service
 
+    # Create sddm.conf.d folder
     if [ ! -d /etc/sddm.conf.d/ ]; then
         sudo mkdir /etc/sddm.conf.d
-        echo "Folder /etc/sddm.conf.d created."
+        echo ":: Folder /etc/sddm.conf.d created."
     fi
 
+    # Copy sddm.conf
     sudo cp sddm/sddm.conf /etc/sddm.conf.d/
-    echo "File /etc/sddm.conf.d/sddm.conf updated."
+    echo ":: File /etc/sddm.conf.d/sddm.conf updated."
 
+    # Download and install sugar candy theme if not exists
+    if [ ! -d /usr/share/sddm/themes/sugar-candy ]; then
+        if [ -f ~/Downloads/sddm-sugar-candy-master.zip ] ;then
+            rm ~/Downloads/sddm-sugar-candy-master.zip
+        fi
+        wget -P ~/Downloads/ https://framagit.org/MarianArlt/sddm-sugar-candy/-/archive/master/sddm-sugar-candy-master.zip
+        if [ -f ~/Downloads/sddm-sugar-candy-master.zip ] ;then
+            unzip -o -q ~/Downloads/sddm-sugar-candy-master.zip -d ~/Downloads/
+            if [ ! -d /usr/share/sddm/themes/sugar-candy ] ;then
+                sudo mkdir -p /usr/share/sddm/themes/sugar-candy
+            fi
+            sudo cp -r ~/Downloads/sddm-sugar-candy-master/* /usr/share/sddm/themes/sugar-candy
+            echo ":: SDDM Sugar Candy Theme installed"
+        else
+            echo "ERROR: Sugar Candy Download not found"
+        fi
+    fi    
+
+    # Install background wallpaper for sddm
     if [ -f /usr/share/sddm/themes/sugar-candy/theme.conf ]; then
-
-        # Cache file for holding the current wallpaper
         sudo cp wallpapers/default.jpg /usr/share/sddm/themes/sugar-candy/Backgrounds/current_wallpaper.jpg
-        echo "Default wallpaper copied into /usr/share/sddm/themes/sugar-candy/Backgrounds/"
-
+        echo ":: Default wallpaper copied into /usr/share/sddm/themes/sugar-candy/Backgrounds/"
         sudo cp sddm/theme.conf /usr/share/sddm/themes/sugar-candy/
         sudo sed -i 's/CURRENTWALLPAPER/'"current_wallpaper.jpg"'/' /usr/share/sddm/themes/sugar-candy/theme.conf
-        echo "File theme.conf updated in /usr/share/sddm/themes/sugar-candy/"
-
+        echo ":: File theme.conf updated in /usr/share/sddm/themes/sugar-candy/"
     fi
 
 elif [ "$dmsel" == "Deactivate current display manager" ] ;then

.install/fcitx5.sh

@@ -0,0 +1,24 @@
+# ------------------------------------------------------
+# Select fcitx5 or not
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "fcitx5"
+echo -e "${NONE}"
+
+if gum confirm "Do you want to install fcitx5 and chinese input method?" ;then
+    packagesPacman=(
+        "fcitx5"
+        "fcitx5-chinese-addons"
+        "fcitx5-configtool"
+        "fcitx5-gtk"
+        "fcitx5-qt"
+    );
+    packagesYay=(
+        "fcitx5-skin-seasons"
+    );
+    source .install/install-packages.sh
+    echo -e "\n# -----------------------------------------------------" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "# fcitx5 support" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "# -----------------------------------------------------" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+    echo "source = ~/dotfiles/hypr/conf/fcitx5.conf" >> ~/dotfiles-versions/${version}/hypr/hyprland.conf
+fi

.install/fish.sh

@@ -1,7 +1,6 @@
 # ------------------------------------------------------
-# Modify existing files before restore starts
+# install fish
 # ------------------------------------------------------
-
-if [ -d ~/dotfiles ] ;then
-    echo ":: Modify existing files"
-fi
+packagesPacman=("fish");
+packagesYay=();
+source .install/install-packages.sh

.install/hidpi.sh

@@ -0,0 +1,21 @@
+
+# ------------------------------------------------------
+# hidpi support
+# ------------------------------------------------------
+
+echo -e "${GREEN}"
+figlet "hidpi"
+echo -e "${NONE}"
+
+hidpiconfirm="Do you want 2x hidpi scale?"
+if gum confirm "$hidpiconfirm"; then
+    sed -i -E 's/size = [0-9]+(\.[0-9]+)?/size = 16/' ~/dotfiles-versions/$version/alacritty/alacritty.toml
+    sed -i -E 's/[0-9]+(\.[0-9]+)?/16/' ~/dotfiles-versions/$version/.settings/rofi-font.rasi
+    echo -e '\n# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# HiDPI Scaling' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e '# -----------------------------------------------------' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    echo -e 'source = ~/dotfiles/hypr/conf/hidpi.conf' >> ~/dotfiles-versions/$version/hypr/hyprland.conf
+    sed -i -E 's/1/2/' ~/dotfiles-versions/$version/hypr/conf/monitors/default.conf
+    #sed -i -E 's/24/32/' ~/dotfiles-versions/$version/hypr/conf/cursor.conf
+    echo ":: finished hidpi patch."
+fi

.install/hyprland-dotfiles.sh

@@ -5,6 +5,9 @@
 if [ -d ~/dotfiles-versions/$version/alacritty ]; then
     _installSymLink alacritty ~/.config/alacritty ~/dotfiles/alacritty/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/kitty ]; then
+    _installSymLink kitty ~/.config/kitty ~/dotfiles/kitty/ ~/.config
+fi
 if [ -d ~/dotfiles-versions/$version/vim ]; then
     _installSymLink vim ~/.config/vim ~/dotfiles/vim/ ~/.config
 fi
@@ -43,8 +46,15 @@ fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
     _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/waypaper ]; then
-    _installSymLink waypaper ~/.config/waypaper ~/dotfiles/waypaper/ ~/.config
+if [ -f ~/dotfiles-versions/$version/chrome-flags.conf ]; then
+    _installSymLink chrome-flags ~/.config/chrome-flags.conf ~/dotfiles/chrome-flags.conf ~/.config
+fi
+if [ -d ~/dotfiles-versions/$version/Vimix-hyprcursors ]; then
+    if [ ! -d ~/.local/share/icons ]; then mkdir -pv ~/.local/share/icons; fi
+    _installSymLink Vimix-hyprcursors ~/.local/share/icons/Vimix-hyprcursors ~/dotfiles/Vimix-hyprcursors ~/.local/share/icons/
+fi
+if [ -d ~/dotfiles-versions/$version/ranger ]; then
+    _installSymLink ranger ~/.config/ranger ~/dotfiles/ranger/ ~/.config
 fi
 echo ":: Symbolic links created."
 echo

.install/packages/general-packages.sh

@@ -1,65 +1,57 @@
 packagesPacman=(
     "pacman-contrib"
     "vim"
-    "bluez"
-    "bluez-utils"
+    "bat"
+    "fzf"
+    "zsh"
+    "fastfetch"
+    "ranger"
+    "btop"
     "neovim"
     "wget"
     "unzip"
-    "alacritty" 
-    "chromium" 
-    "dunst" 
+    "alacritty"
+    "dunst"
     "starship"
-    "mpv" 
+    "mpv"
     "thunar"
-    "nautilus" 
-    "mousepad"
-    "noto-fonts" 
-    "otf-font-awesome" 
-    "ttf-fira-sans" 
-    "ttf-fira-code" 
-    "ttf-firacode-nerd" 
-    "figlet" 
-    "vlc" 
-    "eza" 
-    "python-pip" 
-    "python-psutil" 
-    "python-rich" 
-    "python-click" 
+    "nautilus"
+    "noto-fonts"
+    "otf-font-awesome"
+    "ttf-fira-sans"
+    "ttf-fira-code"
+    "ttf-firacode-nerd"
+    "ttf-firacode-nerd"
+    "figlet"
+    "vlc"
+    "eza"
+    "python-pip"
+    "python-psutil"
+    "python-rich"
     "python-pywal"
-    "python-gobject"
-    "pavucontrol" 
-    "tumbler" 
+    "pavucontrol"
+    "tumbler"
     "papirus-icon-theme"
-    "breeze-icons"
-    "polkit-gnome"
-    "brightnessctl"
     "gum"
     "man-pages"
-    "nm-connection-editor"
     "gvfs"
     "xdg-user-dirs"
-    "xdg-desktop-portal-gtk"
-    "networkmanager"
-    "network-manager-applet"
+#    "xdg-desktop-portal-gtk"
     "xarchiver"
     "thunar-archive-plugin"
     "zip"
     "fuse2"
-    "gtk4"
-    "libadwaita"
     "xdg-desktop-portal"
     "qalculate-gtk"
     "imagemagick"
-    "guvcview"
     "jq"
     "rofi-wayland"
     "fastfetch"
-    "blueman"
 );
 
 packagesYay=(
-    "bibata-cursor-theme" 
+    "vimix-cursors"
+    "orchis-theme"
     "trizen"
-    "pacseek"
+    "google-chrome"
 );

.install/packages/hyprland-packages.sh

@@ -3,18 +3,19 @@ packagesPacman=(
     "hyprpaper"
     "hyprlock"
     "hypridle"
-    "xdg-desktop-portal-hyprland" 
-    "waybar" 
-    "grim" 
+    #    "xdg-desktop-portal-hyprland"
+    "waybar"
+    "grim"
     "slurp"
     "swappy"
     "cliphist"
-);
+    "kitty"
+)
 
 packagesYay=(
+    "pyprland"
     "wlogout"
     "nwg-look"
     "eww"
     "hyprshade"
-    "waypaper"
-);
+)

.install/qtile-dotfiles.sh

@@ -35,4 +35,7 @@ fi
 if [ -d ~/dotfiles-versions/$version/swappy ]; then
     _installSymLink swappy ~/.config/swappy ~/dotfiles/swappy/ ~/.config
 fi
+if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
+    _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
+fi
 echo ":: Symbolic links created."

.install/required.sh

@@ -8,7 +8,7 @@ echo
 
 # Check for required packages
 echo "Checking that required packages for the installation are installed..."
-_installPackagesPacman "rsync" "gum" "figlet" "python" "git";
+_installPackagesPacman "rsync" "gum" "figlet" "python";
 
 # Double check rsync
 if ! command -v rsync &> /dev/null; then

.install/restore.sh

@@ -14,6 +14,14 @@ _showRestoreOptions() {
         restorelist+="~/dotfiles/.bashrc "
         selectedlist+="~/dotfiles/.bashrc,"
     fi
+    if [ -f ~/dotfiles/.zshrc ]; then
+        restorelist+="~/dotfiles/.zshrc "
+        selectedlist+="~/dotfiles/.zshrc,"
+    fi
+    if [ -f ~/dotfiles/.p10k.zsh ]; then
+        restorelist+="~/dotfiles/.p10k.zsh "
+        selectedlist+="~/dotfiles/.p10k.zsh,"
+    fi
     if [ -d ~/dotfiles/.settings ]; then
         restorelist+="~/dotfiles/.settings "
         selectedlist+="~/dotfiles/.settings,"
@@ -24,7 +32,7 @@ _showRestoreOptions() {
             then
                 restorelist+="~/dotfiles/hypr/hypridle.conf "
                 selectedlist+="~/dotfiles/hypr/hypridle.conf,"
-            fi        
+            fi
         fi
         if [ -f ~/dotfiles/hypr/conf/custom.conf ]; then
             restorelist+="~/dotfiles/hypr/conf/custom.conf "
@@ -75,13 +83,13 @@ _showRestoreOptions() {
     fi
     restoreselect=$(gum choose --no-limit --height 20 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " --selected="$selectedlist" $restorelist)
     if [ ! -z "$restoreselect" ] ;then
-        echo "Selected to restore:" 
+        echo "Selected to restore:"
         echo "$restoreselect"
         echo ""
         confirmrestore=$(gum choose "Start restore" "Change restore" "Skip restore")
         if [ "$confirmrestore" == "Start restore" ] ;then
             _startRestore
-        elif [ "$confirmrestore" == "Change restore" ]; then 
+        elif [ "$confirmrestore" == "Change restore" ]; then
             _showRestoreOptions
         else
             echo ":: Restore skipped."
@@ -94,7 +102,7 @@ _showRestoreOptions() {
             echo ":: Installation canceled."
             exit
         fi
-        if [ "$confirmrestore" == "Change restore" ]; then 
+        if [ "$confirmrestore" == "Change restore" ]; then
             echo ""
             _showRestoreOptions
         else
@@ -135,11 +143,11 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/keyboard.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland keyboard.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/monitor.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/monitor.conf ]; then
                 cp ~/dotfiles/hypr/conf/monitor.conf ~/dotfiles-versions/$version/hypr/conf/
-                echo ":: Hyprland monitor.conf restored!"                
+                echo ":: Hyprland monitor.conf restored!"
             fi
         fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/keybinding.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
@@ -153,19 +161,19 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/environment.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland environment.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/layout.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/layout.conf ]; then
                 cp ~/dotfiles/hypr/conf/layout.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland layout.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/windowrule.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/windowrule.conf ]; then
                 cp ~/dotfiles/hypr/conf/windowrule.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland windowrule.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/animation.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/animation.conf ]; then
                 cp ~/dotfiles/hypr/conf/animation.conf ~/dotfiles-versions/$version/hypr/conf/

.install/templates/keyboard-default.conf

@@ -24,7 +24,7 @@ input {
         # for laptop
         # natural_scroll = yes
         # middle_button_emulation = true
-        # clickfinger_behavior = false          
+        # clickfinger_behavior = 1          
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }

.install/templates/keyboard-laptop.conf

@@ -24,7 +24,7 @@ input {
         # for laptop
         natural_scroll = true
         middle_button_emulation = true
-        clickfinger_behavior = false
+        clickfinger_behavior = true
         disable_while_typing = true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.

.install/wallpaper.sh

@@ -5,16 +5,17 @@ echo -e "${GREEN}"
 figlet "Wallpapers"
 echo -e "${NONE}"
 if [ ! -d ~/wallpaper ]; then
-    echo "Do you want to download the wallpapers from repository https://gitlab.com/stephan-raabe/wallpaper/ ?"
+    echo "Do you want to download the wallpapers from repository https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ?"
     echo "If not, the script will install 3 default wallpapers in ~/wallpaper/"
     echo ""
     if gum confirm "Do you want to download the repository?" ;then
-        wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
-        unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
-        if [ ! -d ~/wallpaper/ ]; then
-            mkdir ~/wallpaper
-        fi
-        cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        # wget -P ~/Downloads/ https://gitlab.com/stephan-raabe/wallpaper/-/archive/main/wallpaper-main.zip
+        # unzip -o ~/Downloads/wallpaper-main.zip -d ~/Downloads/
+        # if [ ! -d ~/wallpaper/ ]; then
+        #     mkdir ~/wallpaper
+        # fi
+        # cp ~/Downloads/wallpaper-main/* ~/wallpaper/
+        git clone https://gitea.phywyj.dynv6.net/wyj/wallpaper.git ~/wallpaper
         echo "Wallpapers from the repository installed successfully."
     elif [ $? -eq 130 ]; then
         exit 130

.install/zsh.sh

@@ -0,0 +1,22 @@
+# ------------------------------------------------------
+# install zsh and zinit
+# ------------------------------------------------------
+packagesPacman=("zsh");
+
+echo "Please select the zsh plugin manager:"
+zsh_manager=$(gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "oh my zsh" "zinit")
+if [[ "${zsh_manager}" == *"oh my zsh"* ]]; then
+    source .install/install-packages.sh
+    if [ ! -d ~/.oh-my-zsh ]; then
+        RUNZSH=no CHSH=no sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
+    fi
+    git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
+    git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
+    git clone https://github.com/zdharma-continuum/fast-syntax-highlighting.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/fast-syntax-highlighting
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_ohmyzsh ~/.zshrc
+else
+    packagesYay=("zinit");
+    source .install/install-packages.sh
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_zinit ~/.zshrc
+fi
+_installSymLink p10k ~/.p10k.zsh ~/dotfiles/.p10k.zsh ~/

.install/zshfish.sh

@@ -0,0 +1,25 @@
+# ------------------------------------------------------
+# Select additional shell
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "Zsh Fish"
+echo -e "${NONE}"
+echo "Please select if you want to install zsh or fish."
+echo
+zshfish=$(gum choose --no-limit --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "zsh" "fish")
+
+if [ -z "${zshfish}" ] ;then
+    echo ":: No shell selected. Keep using bash."
+else
+    echo "Please select your default shell."
+	echo
+	shell=$(echo -e "bash\n$zshfish" | gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) ")
+    if [[ $zshfish == *"zsh"* ]]; then
+		echo ":: zsh selected"
+		source .install/zsh.sh
+	fi
+	if [[ $zshfish == *"fish"* ]]; then
+		echo ":: fish selected"
+		source .install/fish.sh
+	fi
+fi

.settings/browser.sh

@@ -1 +1 @@
-chromium
+google-chrome-stable

.settings/editor.sh

@@ -1 +1 @@
-mousepad
+~/dotfiles/.settings/terminal.sh -e vim

.settings/networkmanager.sh

@@ -1 +0,0 @@
-nm-connection-editor

.settings/rofi-border-radius.rasi

@@ -0,0 +1,3 @@
+* {
+    border-radius:  15px;
+}

.settings/rofi-border.rasi

@@ -1 +1,3 @@
-* { border-width: 3px; }
+* {
+    border-width:   2px;
+}

.settings/software.sh

@@ -1 +0,0 @@
-alacritty -e pacseek

.settings/terminal.sh

@@ -1 +1 @@
-alacritty
+kitty

.settings/waybar-quicklinks.json

@@ -1,26 +0,0 @@
-{
-    "custom/quicklink1": {
-        "format": "",
-        "on-click": "~/dotfiles/.settings/browser.sh",
-        "tooltip-format": "Open browser"
-    }, 
-    /*
-    "custom/quicklink1": {
-        "format": "",
-        "on-click": "firefox",
-        "tooltip-format": "Open Firefox"
-    },
-    */ 
-    "custom/quicklink2": {
-        "format": "",
-        "on-click": "~/dotfiles/.settings/filemanager.sh",
-        "tooltip-format": "Open filemanager"
-    }, 
-    "group/quicklinks": {
-        "orientation": "horizontal",
-        "modules": [
-            "custom/quicklink1",
-            "custom/quicklink2"
-         ]
-    }
-}

.version/name

@@ -1 +1 @@
-2.9.2
+2.9.1.2

.version/version

@@ -1 +1 @@
-2920
+2912

.zshrc_ohmyzsh

@@ -0,0 +1,88 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# -----------------------------------------------------
+# Oh my zsh settings
+# -----------------------------------------------------
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# ZSH_THEME="robbyrussell"
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+zstyle ':omz:update' mode auto
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+COMPLETION_WAITING_DOTS="true"
+
+# -----------------------------------------------------
+# Plugins
+# -----------------------------------------------------
+plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# -----------------------------------------------------
+# Variables
+# -----------------------------------------------------
+export PATH=$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+# export MANPATH="/usr/local/man:$MANPATH"
+
+export LANG=en_US.UTF-8
+
+export EDITOR='nvim'
+
+export MAKEFLAGS='-j$(nproc)'
+export CFLAGS='-march=native -O2 -pipe'
+
+# -----------------------------------------------------
+# Alias
+# -----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias ls="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+alias code="code --ozone-platform=wayland --enable-wayland-ime"
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# -----------------------------------------------------
+# Completion
+# -----------------------------------------------------
+[[ -f /home/wyj/.dart-cli-completion/zsh-config.zsh ]] && . /home/wyj/.dart-cli-completion/zsh-config.zsh || true
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh
+
+# -----------------------------------------------------
+# miscs
+# -----------------------------------------------------
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.zshrc_zinit

@@ -0,0 +1,64 @@
+# ---------------------------------------------------
+# Zinit and plugins
+# ---------------------------------------------------
+source /usr/share/zinit/zinit.zsh
+
+# Load powerlevel10k theme
+zinit ice depth"1" # git clone depth
+zinit light romkatv/powerlevel10k
+
+# Load plugins
+zinit light zsh-users/zsh-autosuggestions
+zinit light zdharma-continuum/fast-syntax-highlighting
+# oh-my-zsh plugins
+zi snippet OMZL::git.zsh
+zi snippet OMZP::git
+zi snippet OMZP::sudo
+zi snippet OMZP::colored-man-pages
+zi snippet OMZP::eza
+zi snippet OMZP::z
+# others
+zplugin ice as"program" pick"bin/git-dsf"
+zplugin light zdharma-continuum/zsh-diff-so-fancy
+
+# ----------------------------------------------------
+# Variables
+# ----------------------------------------------------
+export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+export EDITOR=vim
+
+# ----------------------------------------------------
+# Alias
+# ----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias eza="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# Miscs
+# -----------------------------------------------------
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh

CHANGELOG.md

@@ -1,18 +1,5 @@
-Version 2.9.2
-https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.2
---------------------------------------------------------
-- Works with Hyprland 0.41.2
-- Introducing waypaper as new wallpaper selector
-- Wallpaper cache for generated wallpaper variants. Will speed up the change between wallpapers if cached files exists. https://gitlab.com/stephan-raabe/dotfiles/-/wikis/Home/Wallpapers#wallpaper-cache
-- You can define custom quicklinks in waybar: https://gitlab.com/stephan-raabe/dotfiles/-/wikis/Home/Waybar#define-your-quicklinks
-- New SVG icons in waybar for ML4W and ChatGPT
-- Default waybar theme changed to ml4w-blur/white
-- Alacritty: selected text will be copied to the primary clipboard
-- General/standard Hyprland environment configuration moved to ml4w.conf (will be re-used in kvm.conf and nvidia.conf)
-- The time format in hyprlock is now aligned with the waybar clock time format that is defined in the ML4W Settings App
-
 Version 2.9.1.2
-https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.2
+https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
 --------------------------------------------------------
 - Workspaces module in waybar updated to enable scroll to change the workspace https://gitlab.com/stephan-raabe/dotfiles/-/merge_requests/114
 - More functions deactivated in Game Mode (SUPER+ALT+G)

README.md

@@ -1,8 +1,8 @@
-# ML4W Dotfiles 2.9.2
+# ML4W Dotfiles 2.9.1.2
 
 An advanced configuration of Hyprland for Arch Linux based distributions. This package includes an installation script to install and setup the required components.
 
-[![Screenshot](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/5715487b0af68f36295f4e37b634f17a/screenshot-20240627-113621.png "Screenshot")](![screenshots/screenshot2.png](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/5715487b0af68f36295f4e37b634f17a/screenshot-20240627-113621.png))
+[![Screenshot](screenshots/screenshot2.png "Screenshot")](screenshots/screenshot2.png)
 
 The ML4W Dotfiles are available as 
 
@@ -37,7 +37,11 @@ You can also visit the [ML4W Discord Server](https://discord.gg/c4fJK7Za3g) to s
 
 ## Screenshots
 
-[![Screenshot](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/b8dc6a841b6b04fe0b2d380377117a50/screenshot-20240627-113733.png "Screenshot")](![screenshots/screenshot1.png](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/b8dc6a841b6b04fe0b2d380377117a50/screenshot-20240627-113733.png))
+[![Screenshot](screenshots/screenshot1.png "Screenshot")](screenshots/screenshot1.png)
+
+[![Screenshot](screenshots/screenshot3.png "Screenshot")](screenshots/screenshot3.png)
+
+[![Screenshot](screenshots/screenshot4.png "Screenshot")](screenshots/screenshot5.png)
 
 ## Wallpaper repository
 

Vimix-hyprcursors/manifest.hl

@@ -0,0 +1,4 @@
+name = Extracted Theme
+description = Automatically extracted with hyprcursor-util
+version = 0.1
+cursors_directory = hyprcursors

alacritty/alacritty.toml

@@ -1,5 +1,5 @@
 [font]
-size = 12.0
+size = 16.0
 
 [font.normal]
 family = "FiraCode Nerd Font"
@@ -9,8 +9,8 @@ style = "Regular"
 opacity = 0.7
 
 [window.padding]
-x = 15
-y = 15
+x = 0
+y = 0
 
 [selection]
 save_to_clipboard = true

chrome-flags.conf

@@ -0,0 +1 @@
+--ozone-platform=wayland --enable-wayland-ime

fastfetch/config.jsonc

@@ -1,110 +1,181 @@
-//  Thanks to Bina
+// Note that you must replace the image path to an existing image to display it.
 {
-  "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
-  "logo": {
-      "padding": {
-      "top": 2
-      }
-  },
-  "display": {
-        "separator": " ➜  "
-  },
-  "modules": [
-      "break",
-      "break",
-      "break",
-       {
-          "type": "os",
-          "key": "OS   ",
-          "keyColor": "31",  // = color1
-      },
-      {
-          "type": "kernel",
-          "key": " ├  ",
-          "keyColor": "31",
-      },
-      {
-          "type": "packages",
-          "format": "{} (pacman)",
-          "key": " ├ 󰏖 ",
-          "keyColor": "31",  
-      },
-      {
-          "type": "shell",
-          "key": " └  ",
-          "keyColor": "31", 
-      },
-      "break",
-      {
-          "type": "wm",
-          "key": "WM   ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "wmtheme",
-          "key": " ├ 󰉼 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "icons",
-          "key": " ├ 󰀻 ",
-          "keyColor": "32",
-      },
-      {
-          "type": "cursor",
-          "key": " ├  ",
-          "keyColor": "32", 
-      },
-      {
-          "type": "terminal",
-          "key": " ├  ",
-          "keyColor": "32",
-      },
-      {
-          "type": "terminalfont",
-          "key": " └  ",
-          "keyColor": "32", 
-      },
-      "break",
-      {
-          "type": "host",
-          "format": "{5} {1} Type {2}",
-          "key": "PC   ",
-          "keyColor": "33",
-      },
-      {
-          "type": "cpu",
-          "format": "{1} ({3}) @ {7} GHz",
-          "key": " ├  ",
-          "keyColor": "33",
-      },
-      {
-          "type": "gpu",
-          "format": "{1} {2} @ {12} GHz",            
-          "key": " ├ 󰢮 ",
-          "keyColor": "33",
-      },
-      {
-          "type": "memory",
-          "key": " ├  ",
-          "keyColor": "33",
-      },
-      {
-          "type": "swap",
-          "key": " ├ 󰓡 ",
-          "keyColor": "33",
-      },
-      {
-          "type": "disk",
-          "key": " ├ 󰋊 ",
-          "keyColor": "33",
-      },
-      {
-          "type": "monitor",
-          "key": " └  ",
-          "keyColor": "33",
-      },
-      "break",
-      "break",
-  ]
-}
+    "$schema": "https://github.com/fastfetch-cli/fastfetch/raw/dev/doc/json_schema.json",
+    // "logo": {
+    //     "type": "iterm",
+    //     "source": "/Users/carter/Desktop/apple1.png",
+    //     "width": 28,
+    //     "height": 12
+    // },
+    "display": {
+        //    "separator": "  "
+        "separator": " "
+    },
+    "modules": [
+        {
+            "type": "host",
+            "key": "╭─󰌢",
+            "keyColor": "green"
+        },
+        {
+            "type": "cpu",
+            "key": "├─󰻠",
+            "keyColor": "green"
+        },
+        {
+            "type": "gpu",
+            "key": "├─󰍛",
+            "keyColor": "green"
+        },
+        {
+            "type": "disk",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "memory",
+            "key": "├─󰑭",
+            "keyColor": "green"
+        },
+        {
+            "type": "swap",
+            "key": "├─󰓡",
+            "keyColor": "green"
+        },
+        {
+            "type": "display",
+            "key": "├─󰍹",
+            "keyColor": "green"
+        },
+        {
+            "type": "battery",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "poweradapter",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "gamepad",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "bluetooth",
+            "key": "├─",
+            "keyColor": "green"
+        },
+        {
+            "type": "sound",
+            "key": "╰─",
+            "keyColor": "green"
+        },
+        "break",
+        {
+            "type": "shell",
+            "key": "╭─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminal",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "editor",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "terminalfont",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "lm",
+            "key": "├─󰧨",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "de",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "wm",
+            "key": "├─",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "theme",
+            "key": "├─󰉼",
+            "keyColor": "yellow"
+        },
+        {
+            "type": "icons",
+            "key": "╰─󰀻",
+            "keyColor": "yellow"
+        },
+        "break",
+        {
+            "type": "title",
+            "key": "╭─",
+            "format": "{1}@{2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "os",
+            "key": "├─󰣇", // Just get your distro's logo off nerdfonts.com
+            "keyColor": "blue"
+        },
+        {
+            "type": "kernel",
+            "key": "├─",
+            "format": "{1} {2}",
+            "keyColor": "blue"
+        },
+        {
+            "type": "packages",
+            "key": "├─󰏖",
+            "keyColor": "blue"
+        },
+        {
+            "type": "uptime",
+            "key": "├─󰅐",
+            "keyColor": "blue"
+        },
+        {
+            "type": "media",
+            "key": "├─󰝚",
+            "keyColor": "blue"
+        },
+        {
+            "type": "cpuusage",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "loadavg",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "processes",
+            "key": "├─",
+            "keyColor": "blue"
+        },
+        {
+            "type": "localip",
+            "key": "╰─󰩟",
+            "compact": true,
+            "keyColor": "blue"
+        },
+        "break",
+        {
+            "type": "custom",
+            "format": " \u001b[90m󱓻  \u001b[31m󱓻  \u001b[32m󱓻  \u001b[33m󱓻  \u001b[34m󱓻  \u001b[35m󱓻  \u001b[36m󱓻  \u001b[37m󱓻  \u001b[38m󱓻  \u001b[39m󱓻 "
+        }
+    ]
+}

hypr/conf/animation.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/animations/default.conf
+source = ~/dotfiles/hypr/conf/animations/animations-high.conf

hypr/conf/autostart.conf

@@ -20,20 +20,17 @@ exec-once = hypridle
 # Load cliphist history
 exec-once = wl-paste --watch cliphist store
 
+# Initialize Wallpaper Engine
+exec-once = ~/dotfiles/hypr/scripts/init-wallpaper-engine.sh
+
 # Autostart ML4W App
 exec-once = ~/dotfiles/hypr/scripts/ml4w-welcome-autostart.sh
 
 # Start ewww daemon
 exec-once = ~/dotfiles/hypr/scripts/eww.sh
 
-# Initialize waypaper
-exec-once = waypaper --restore
+exec-once = pypr
 
-# Launch Waybar
-exec-once = ~/dotfiles/waybar/launch.sh
 
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
-
-# Load configuration from ML4W Hyprland Settings App
-exec = ~/.config/ml4w-hyprland-settings/hyprctl.sh

hypr/conf/cursor.conf

@@ -1 +1,2 @@
-exec-once = hyprctl setcursor Bibata-Modern-Ice 24
+exec-once = hyprctl setcursor Vimix-hyprcursors 32
+env = HYPRCURSOR_THEME,Vimix-hyprcursors

hypr/conf/decoration.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/decorations/default.conf
+source = ~/dotfiles/hypr/conf/decorations/custom.conf

hypr/conf/decorations/custom.conf

@@ -0,0 +1,31 @@
+# ----------------------------------------------------- 
+# General window decoration
+# name: "Default"
+# ----------------------------------------------------- 
+
+decoration {
+    rounding = 10
+    blur {
+        enabled = true
+        size = 10
+        passes = 3
+        new_optimizations = on
+        ignore_opacity = true
+        xray = false
+        blurls = waybar
+    }
+    active_opacity = 1.0
+    inactive_opacity = 0.8
+    fullscreen_opacity = 1.0
+
+    shadow {
+        enabled = true
+        range = 30
+        render_power = 3
+        color = 0x66000000
+    }
+    #drop_shadow = true
+    #shadow_range = 30
+    #shadow_render_power = 3
+    #col.shadow = 0x66000000
+}

hypr/conf/decorations/low.conf

@@ -0,0 +1,31 @@
+# ----------------------------------------------------- 
+# General window decoration
+# name: "Low"
+# ----------------------------------------------------- 
+
+decoration {
+    rounding = 10
+    blur {
+        enabled = true
+        size = 10
+        passes = 1
+        new_optimizations = on
+        ignore_opacity = true
+        xray = true 
+        blurls = waybar
+    }
+    active_opacity = 1.0
+    inactive_opacity = 0.8
+    fullscreen_opacity = 1.0
+
+    shadow {
+        enabled = false
+        range = 20
+        render_power = 3
+        color = 0x66000000
+    }
+    #drop_shadow = true
+    #shadow_range = 30
+    #shadow_render_power = 3
+    #col.shadow = 0x66000000
+}

hypr/conf/environments/default.conf

@@ -2,4 +2,11 @@
 # Environment Variables
 # name: "Default"
 # ----------------------------------------------------- 
-# Set in ml4w.conf
+
+env = XDG_SESSION_TYPE,wayland
+env = XDG_SESSION_DESKTOP,Hyprland
+env = QT_QPA_PLATFORM,wayland
+env = QT_QPA_PLATFORMTHEME,qt6ct
+env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
+env = QT_AUTO_SCREEN_SCALE_FACTOR,1
+env = MOZ_ENABLE_WAYLAND,1

hypr/conf/environments/kvm.conf

@@ -2,5 +2,13 @@
 # Environment Variables
 # name: "KVM"
 # ----------------------------------------------------- 
+
+env = XDG_SESSION_TYPE,wayland
+env = XDG_SESSION_DESKTOP,Hyprland
+env = QT_QPA_PLATFORM,wayland
+env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
+env = QT_AUTO_SCREEN_SCALE_FACTOR,1
+env = MOZ_ENABLE_WAYLAND,1
+env = GDK_SCALE,1
 env = WLR_RENDERER_ALLOW_SOFTWARE, 1
 env = WLR_NO_HARDWARE_CURSORS, 1

hypr/conf/fcitx5.conf

@@ -0,0 +1,7 @@
+exec-once = fcitx5-remote -r
+exec-once = fcitx5 -d --replace
+exec-once = fcitx5-remote -r
+
+bind=$mainMod CTRL, E, exec, pkill fcitx5 -9;sleep 1;fcitx5 -d --replace; sleep 1;fcitx5-remote -r
+
+env=QT_IM_MODULE,fcitx

hypr/conf/hidpi.conf

@@ -0,0 +1,6 @@
+xwayland {
+  force_zero_scaling = true
+}
+
+env = GDK_SCALE,2
+env = QT_AUTO_SCREEN_SCALE_FACTOR,1

hypr/conf/keybinding.conf

@@ -1 +1 @@
-source = ~/dotfiles/hypr/conf/keybindings/default.conf
+source = ~/dotfiles/hypr/conf/keybindings/custom.conf