fix: install ohmyzsh only if haven't

.install/diagnosis.sh

@@ -19,7 +19,6 @@ if gum confirm "Do you want to run a short system check?" ;then
     _commandExists "wlogout" "wlogout"
     _commandExists "eww" "eww"
     _commandExists "magick" "imagemagick"
-    _commandExists "waypaper" "waypaper"
 
 elif [ $? -eq 130 ]; then
     exit 130

.install/displaymanager.sh

@@ -63,15 +63,10 @@ if [ -z "${dmsel}" ] ;then
 fi
 if [ "$dmsel" == "Install sddm and theme" ] ;then
 
-    if [ -d /usr/share/sddm/themes/sugar-candy/ ] ;then
-        sudo rm -rf /usr/share/sddm/themes/sugar-candy/
-        echo ":: Sugar Candy folder removed"
-    fi
-
     disman=0
     # Try to force the installation of sddm
     echo ":: Install sddm"
-    yay -S --noconfirm sddm sddm-sugar-candy-git --ask 4
+    yay -S --noconfirm sddm --ask 4
 
     # Enable sddm
     if [ -f /etc/systemd/system/display-manager.service ]; then
@@ -79,24 +74,41 @@ if [ "$dmsel" == "Install sddm and theme" ] ;then
     fi
     sudo systemctl enable sddm.service
 
+    # Create sddm.conf.d folder
     if [ ! -d /etc/sddm.conf.d/ ]; then
         sudo mkdir /etc/sddm.conf.d
-        echo "Folder /etc/sddm.conf.d created."
+        echo ":: Folder /etc/sddm.conf.d created."
     fi
 
+    # Copy sddm.conf
     sudo cp sddm/sddm.conf /etc/sddm.conf.d/
-    echo "File /etc/sddm.conf.d/sddm.conf updated."
+    echo ":: File /etc/sddm.conf.d/sddm.conf updated."
 
+    # Download and install sugar candy theme if not exists
+    if [ ! -d /usr/share/sddm/themes/sugar-candy ]; then
+        if [ -f ~/Downloads/sddm-sugar-candy-master.zip ] ;then
+            rm ~/Downloads/sddm-sugar-candy-master.zip
+        fi
+        wget -P ~/Downloads/ https://framagit.org/MarianArlt/sddm-sugar-candy/-/archive/master/sddm-sugar-candy-master.zip
+        if [ -f ~/Downloads/sddm-sugar-candy-master.zip ] ;then
+            unzip -o -q ~/Downloads/sddm-sugar-candy-master.zip -d ~/Downloads/
+            if [ ! -d /usr/share/sddm/themes/sugar-candy ] ;then
+                sudo mkdir -p /usr/share/sddm/themes/sugar-candy
+            fi
+            sudo cp -r ~/Downloads/sddm-sugar-candy-master/* /usr/share/sddm/themes/sugar-candy
+            echo ":: SDDM Sugar Candy Theme installed"
+        else
+            echo "ERROR: Sugar Candy Download not found"
+        fi
+    fi    
+
+    # Install background wallpaper for sddm
     if [ -f /usr/share/sddm/themes/sugar-candy/theme.conf ]; then
-
-        # Cache file for holding the current wallpaper
         sudo cp wallpapers/default.jpg /usr/share/sddm/themes/sugar-candy/Backgrounds/current_wallpaper.jpg
-        echo "Default wallpaper copied into /usr/share/sddm/themes/sugar-candy/Backgrounds/"
+        echo ":: Default wallpaper copied into /usr/share/sddm/themes/sugar-candy/Backgrounds/"
-
         sudo cp sddm/theme.conf /usr/share/sddm/themes/sugar-candy/
         sudo sed -i 's/CURRENTWALLPAPER/'"current_wallpaper.jpg"'/' /usr/share/sddm/themes/sugar-candy/theme.conf
-        echo "File theme.conf updated in /usr/share/sddm/themes/sugar-candy/"
+        echo ":: File theme.conf updated in /usr/share/sddm/themes/sugar-candy/"
-
     fi
 
 elif [ "$dmsel" == "Deactivate current display manager" ] ;then

.install/fish.sh

@@ -1,7 +1,6 @@
 # ------------------------------------------------------
-# Modify existing files before restore starts
+# install fish
 # ------------------------------------------------------
-
+packagesPacman=("fish");
-if [ -d ~/dotfiles ] ;then
+packagesYay=();
-    echo ":: Modify existing files"
+source .install/install-packages.sh
-fi

.install/hyprland-dotfiles.sh

@@ -43,8 +43,5 @@ fi
 if [ -d ~/dotfiles-versions/$version/fastfetch ]; then
     _installSymLink fastfetch ~/.config/fastfetch ~/dotfiles/fastfetch/ ~/.config
 fi
-if [ -d ~/dotfiles-versions/$version/waypaper ]; then
-    _installSymLink waypaper ~/.config/waypaper ~/dotfiles/waypaper/ ~/.config
-fi
 echo ":: Symbolic links created."
 echo

.install/packages/hyprland-packages.sh

@@ -16,5 +16,4 @@ packagesYay=(
     "nwg-look"
     "eww"
     "hyprshade"
-    "waypaper"
 );

.install/required.sh

@@ -8,7 +8,7 @@ echo
 
 # Check for required packages
 echo "Checking that required packages for the installation are installed..."
-_installPackagesPacman "rsync" "gum" "figlet" "python" "git";
+_installPackagesPacman "rsync" "gum" "figlet" "python";
 
 # Double check rsync
 if ! command -v rsync &> /dev/null; then

.install/restore.sh

@@ -14,6 +14,14 @@ _showRestoreOptions() {
         restorelist+="~/dotfiles/.bashrc "
         selectedlist+="~/dotfiles/.bashrc,"
     fi
+    if [ -f ~/dotfiles/.zshrc ]; then
+        restorelist+="~/dotfiles/.zshrc "
+        selectedlist+="~/dotfiles/.zshrc,"
+    fi
+    if [ -f ~/dotfiles/.p10k.zsh ]; then
+        restorelist+="~/dotfiles/.p10k.zsh "
+        selectedlist+="~/dotfiles/.p10k.zsh,"
+    fi
     if [ -d ~/dotfiles/.settings ]; then
         restorelist+="~/dotfiles/.settings "
         selectedlist+="~/dotfiles/.settings,"
@@ -24,7 +32,7 @@ _showRestoreOptions() {
             then
                 restorelist+="~/dotfiles/hypr/hypridle.conf "
                 selectedlist+="~/dotfiles/hypr/hypridle.conf,"
-            fi        
+            fi
         fi
         if [ -f ~/dotfiles/hypr/conf/custom.conf ]; then
             restorelist+="~/dotfiles/hypr/conf/custom.conf "
@@ -75,13 +83,13 @@ _showRestoreOptions() {
     fi
     restoreselect=$(gum choose --no-limit --height 20 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " --selected="$selectedlist" $restorelist)
     if [ ! -z "$restoreselect" ] ;then
-        echo "Selected to restore:" 
+        echo "Selected to restore:"
         echo "$restoreselect"
         echo ""
         confirmrestore=$(gum choose "Start restore" "Change restore" "Skip restore")
         if [ "$confirmrestore" == "Start restore" ] ;then
             _startRestore
-        elif [ "$confirmrestore" == "Change restore" ]; then 
+        elif [ "$confirmrestore" == "Change restore" ]; then
             _showRestoreOptions
         else
             echo ":: Restore skipped."
@@ -94,7 +102,7 @@ _showRestoreOptions() {
             echo ":: Installation canceled."
             exit
         fi
-        if [ "$confirmrestore" == "Change restore" ]; then 
+        if [ "$confirmrestore" == "Change restore" ]; then
             echo ""
             _showRestoreOptions
         else
@@ -135,11 +143,11 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/keyboard.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland keyboard.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/monitor.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/monitor.conf ]; then
                 cp ~/dotfiles/hypr/conf/monitor.conf ~/dotfiles-versions/$version/hypr/conf/
-                echo ":: Hyprland monitor.conf restored!"                
+                echo ":: Hyprland monitor.conf restored!"
             fi
         fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/keybinding.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
@@ -153,19 +161,19 @@ _startRestore() {
                 cp ~/dotfiles/hypr/conf/environment.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland environment.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/layout.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/layout.conf ]; then
                 cp ~/dotfiles/hypr/conf/layout.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland layout.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/windowrule.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/windowrule.conf ]; then
                 cp ~/dotfiles/hypr/conf/windowrule.conf ~/dotfiles-versions/$version/hypr/conf/
                 echo ":: Hyprland windowrule.conf restored!"
             fi
-        fi        
+        fi
         if [[ $restoreselect == *"~/dotfiles/hypr/conf/animation.conf"* ]] || [[ $restoreselect == *"All"* ]] ; then
             if [ -f ~/dotfiles/hypr/conf/animation.conf ]; then
                 cp ~/dotfiles/hypr/conf/animation.conf ~/dotfiles-versions/$version/hypr/conf/

.install/templates/keyboard-default.conf

@@ -24,7 +24,7 @@ input {
         # for laptop
         # natural_scroll = yes
         # middle_button_emulation = true
-        # clickfinger_behavior = false          
+        # clickfinger_behavior = 1          
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.
 }

.install/templates/keyboard-laptop.conf

@@ -24,7 +24,7 @@ input {
         # for laptop
         natural_scroll = true
         middle_button_emulation = true
-        clickfinger_behavior = false
+        clickfinger_behavior = true
         disable_while_typing = true
     }
     sensitivity = 0 # -1.0 - 1.0, 0 means no modification.

.install/zsh.sh

@@ -0,0 +1,22 @@
+# ------------------------------------------------------
+# install zsh and zinit
+# ------------------------------------------------------
+packagesPacman=("zsh");
+
+echo "Please select the zsh plugin manager:"
+zsh_manager=$(gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "oh my zsh" "zinit")
+if [[ "${zsh_manager}" == *"oh my zsh"* ]]; then
+    source .install/install-packages.sh
+    if [ ! -d ~/.oh-my-zsh ]; then
+        RUNZSH=no CHSH=no sh -c "$(curl -fsSL https://raw.githubusercontent.com/ohmyzsh/ohmyzsh/master/tools/install.sh)"
+    fi
+    git clone --depth=1 https://github.com/romkatv/powerlevel10k.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/themes/powerlevel10k
+    git clone https://github.com/zsh-users/zsh-autosuggestions ${ZSH_CUSTOM:-~/.oh-my-zsh/custom}/plugins/zsh-autosuggestions
+    git clone https://github.com/zdharma-continuum/fast-syntax-highlighting.git ${ZSH_CUSTOM:-$HOME/.oh-my-zsh/custom}/plugins/fast-syntax-highlighting
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_ohmyzsh ~/.zshrc
+else
+    packagesYay=("zinit");
+    source .install/install-packages.sh
+    _installSymLink zshrc ~/.zshrc ~/dotfiles/.zshrc_zinit ~/.zshrc
+fi
+_installSymLink p10k ~/.p10k.zsh ~/dotfiles/.p10k.zsh ~/

.install/zshfish.sh

@@ -0,0 +1,25 @@
+# ------------------------------------------------------
+# Select additional shell
+# ------------------------------------------------------
+echo -e "${GREEN}"
+figlet "Zsh Fish"
+echo -e "${NONE}"
+echo "Please select if you want to install zsh or fish."
+echo
+zshfish=$(gum choose --no-limit --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) " "zsh" "fish")
+
+if [ -z "${zshfish}" ] ;then
+    echo ":: No shell selected. Keep using bash."
+else
+    echo "Please select your default shell."
+	echo
+	shell=$(echo -e "bash\n$zshfish" | gum choose --limit=1 --cursor-prefix "( ) " --selected-prefix "(x) " --unselected-prefix "( ) ")
+    if [[ $zshfish == *"zsh"* ]]; then
+		echo ":: zsh selected"
+		source .install/zsh.sh
+	fi
+	if [[ $zshfish == *"fish"* ]]; then
+		echo ":: fish selected"
+		source .install/fish.sh
+	fi
+fi

.settings/waybar-quicklinks.json

@@ -1,26 +0,0 @@
-{
-    "custom/quicklink1": {
-        "format": "",
-        "on-click": "~/dotfiles/.settings/browser.sh",
-        "tooltip-format": "Open browser"
-    }, 
-    /*
-    "custom/quicklink1": {
-        "format": "",
-        "on-click": "firefox",
-        "tooltip-format": "Open Firefox"
-    },
-    */ 
-    "custom/quicklink2": {
-        "format": "",
-        "on-click": "~/dotfiles/.settings/filemanager.sh",
-        "tooltip-format": "Open filemanager"
-    }, 
-    "group/quicklinks": {
-        "orientation": "horizontal",
-        "modules": [
-            "custom/quicklink1",
-            "custom/quicklink2"
-         ]
-    }
-}

.version/name

@@ -1 +1 @@
-2.9.2
+2.9.1.2

.version/version

@@ -1 +1 @@
-2920
+2912

.zshrc_ohmyzsh

@@ -0,0 +1,88 @@
+# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
+# Initialization code that may require console input (password prompts, [y/n]
+# confirmations, etc.) must go above this block; everything else may go below.
+if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
+  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
+fi
+
+# -----------------------------------------------------
+# Oh my zsh settings
+# -----------------------------------------------------
+
+# Path to your oh-my-zsh installation.
+export ZSH="$HOME/.oh-my-zsh"
+
+# ZSH_THEME="robbyrussell"
+ZSH_THEME="powerlevel10k/powerlevel10k"
+
+# Uncomment the following line to use hyphen-insensitive completion.
+# Case-sensitive completion must be off. _ and - will be interchangeable.
+# HYPHEN_INSENSITIVE="true"
+
+zstyle ':omz:update' mode auto
+
+# Uncomment the following line to display red dots whilst waiting for completion.
+# You can also set it to another string to have that shown instead of the default red dots.
+# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
+# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
+COMPLETION_WAITING_DOTS="true"
+
+# -----------------------------------------------------
+# Plugins
+# -----------------------------------------------------
+plugins=(git colored-man-pages eza z sudo zsh-autosuggestions fast-syntax-highlighting)
+
+source $ZSH/oh-my-zsh.sh
+
+# -----------------------------------------------------
+# Variables
+# -----------------------------------------------------
+export PATH=$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+# export MANPATH="/usr/local/man:$MANPATH"
+
+export LANG=en_US.UTF-8
+
+export EDITOR='nvim'
+
+export MAKEFLAGS='-j$(nproc)'
+export CFLAGS='-march=native -O2 -pipe'
+
+# -----------------------------------------------------
+# Alias
+# -----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias ls="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+alias code="code --ozone-platform=wayland --enable-wayland-ime"
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# -----------------------------------------------------
+# Completion
+# -----------------------------------------------------
+[[ -f /home/wyj/.dart-cli-completion/zsh-config.zsh ]] && . /home/wyj/.dart-cli-completion/zsh-config.zsh || true
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh
+
+# -----------------------------------------------------
+# miscs
+# -----------------------------------------------------
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

.zshrc_zinit

@@ -0,0 +1,64 @@
+# ---------------------------------------------------
+# Zinit and plugins
+# ---------------------------------------------------
+source /usr/share/zinit/zinit.zsh
+
+# Load powerlevel10k theme
+zinit ice depth"1" # git clone depth
+zinit light romkatv/powerlevel10k
+
+# Load plugins
+zinit light zsh-users/zsh-autosuggestions
+zinit light zdharma-continuum/fast-syntax-highlighting
+# oh-my-zsh plugins
+zi snippet OMZL::git.zsh
+zi snippet OMZP::git
+zi snippet OMZP::sudo
+zi snippet OMZP::colored-man-pages
+zi snippet OMZP::eza
+zi snippet OMZP::z
+# others
+zplugin ice as"program" pick"bin/git-dsf"
+zplugin light zdharma-continuum/zsh-diff-so-fancy
+
+# ----------------------------------------------------
+# Variables
+# ----------------------------------------------------
+export PATH=$HOME/bin:$HOME/.cargo/bin:$HOME/.local/bin:/usr/local/bin:$PATH
+export EDITOR=vim
+
+# ----------------------------------------------------
+# Alias
+# ----------------------------------------------------
+alias sshkoko="TERM=xterm-256color ssh ywang2020@koko-login.hpc.fau.edu"
+alias wakemac="wakeonlan  18:C0:4D:8D:56:0E"
+alias eza="eza --icons=auto"
+alias githashselector="git log --oneline | gum filter | cut -d' ' -f1"
+alias bat="bat --paging=never"
+
+# -----------------------------------------------------
+# evals
+# -----------------------------------------------------
+eval $(thefuck --alias)
+eval "$(fzf --zsh)"
+
+# -----------------------------------------------------
+# Miscs
+# -----------------------------------------------------
+# fix ssh if in kitty
+if [[ "$TERM" == "xterm-kitty" && -z "$SSH_CONNECTION" ]]; then
+    alias ssh="kitty +kitten ssh"
+fi
+
+# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
+[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh
+
+# -----------------------------------------------------
+# PYWAL
+# -----------------------------------------------------
+cat ~/.cache/wal/sequences
+
+# -----------------------------------------------------
+# Custom
+# -----------------------------------------------------
+[[ ! -f ~/.custom.zsh ]] || source ~/.custom.zsh

CHANGELOG.md

@@ -1,18 +1,5 @@
-Version 2.9.2
-https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.2
---------------------------------------------------------
-- Works with Hyprland 0.41.2
-- Introducing waypaper as new wallpaper selector
-- Wallpaper cache for generated wallpaper variants. Will speed up the change between wallpapers if cached files exists. https://gitlab.com/stephan-raabe/dotfiles/-/wikis/Home/Wallpapers#wallpaper-cache
-- You can define custom quicklinks in waybar: https://gitlab.com/stephan-raabe/dotfiles/-/wikis/Home/Waybar#define-your-quicklinks
-- New SVG icons in waybar for ML4W and ChatGPT
-- Default waybar theme changed to ml4w-blur/white
-- Alacritty: selected text will be copied to the primary clipboard
-- General/standard Hyprland environment configuration moved to ml4w.conf (will be re-used in kvm.conf and nvidia.conf)
-- The time format in hyprlock is now aligned with the waybar clock time format that is defined in the ML4W Settings App
-
 Version 2.9.1.2
-https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.2
+https://gitlab.com/stephan-raabe/dotfiles/-/releases/2.9.1.1
 --------------------------------------------------------
 - Workspaces module in waybar updated to enable scroll to change the workspace https://gitlab.com/stephan-raabe/dotfiles/-/merge_requests/114
 - More functions deactivated in Game Mode (SUPER+ALT+G)

README.md

@@ -1,8 +1,8 @@
-# ML4W Dotfiles 2.9.2
+# ML4W Dotfiles 2.9.1.2
 
 An advanced configuration of Hyprland for Arch Linux based distributions. This package includes an installation script to install and setup the required components.
 
-[![Screenshot](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/5715487b0af68f36295f4e37b634f17a/screenshot-20240627-113621.png "Screenshot")](![screenshots/screenshot2.png](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/5715487b0af68f36295f4e37b634f17a/screenshot-20240627-113621.png))
+[![Screenshot](screenshots/screenshot2.png "Screenshot")](screenshots/screenshot2.png)
 
 The ML4W Dotfiles are available as 
 
@@ -37,7 +37,11 @@ You can also visit the [ML4W Discord Server](https://discord.gg/c4fJK7Za3g) to s
 
 ## Screenshots
 
-[![Screenshot](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/b8dc6a841b6b04fe0b2d380377117a50/screenshot-20240627-113733.png "Screenshot")](![screenshots/screenshot1.png](https://gitlab.com/stephan-raabe/dotfiles/-/wikis/uploads/b8dc6a841b6b04fe0b2d380377117a50/screenshot-20240627-113733.png))
+[![Screenshot](screenshots/screenshot1.png "Screenshot")](screenshots/screenshot1.png)
+
+[![Screenshot](screenshots/screenshot3.png "Screenshot")](screenshots/screenshot3.png)
+
+[![Screenshot](screenshots/screenshot4.png "Screenshot")](screenshots/screenshot5.png)
 
 ## Wallpaper repository
 

alacritty/alacritty.toml

@@ -11,6 +11,3 @@ opacity = 0.7
 [window.padding]
 x = 15
 y = 15
-
-[selection]
-save_to_clipboard = true

hypr/conf/autostart.conf

@@ -20,18 +20,15 @@ exec-once = hypridle
 # Load cliphist history
 exec-once = wl-paste --watch cliphist store
 
+# Initialize Wallpaper Engine
+exec-once = ~/dotfiles/hypr/scripts/init-wallpaper-engine.sh
+
 # Autostart ML4W App
 exec-once = ~/dotfiles/hypr/scripts/ml4w-welcome-autostart.sh
 
 # Start ewww daemon
 exec-once = ~/dotfiles/hypr/scripts/eww.sh
 
-# Initialize waypaper
-exec-once = waypaper --restore
-
-# Launch Waybar
-exec-once = ~/dotfiles/waybar/launch.sh
-
 # Start autostart cleanup
 exec-once = ~/dotfiles/hypr/scripts/cleanup.sh
 

hypr/conf/environments/default.conf

@@ -2,4 +2,11 @@
 # Environment Variables
 # name: "Default"
 # ----------------------------------------------------- 
-# Set in ml4w.conf
+
+env = XDG_SESSION_TYPE,wayland
+env = XDG_SESSION_DESKTOP,Hyprland
+env = QT_QPA_PLATFORM,wayland
+env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
+env = QT_AUTO_SCREEN_SCALE_FACTOR,1
+env = MOZ_ENABLE_WAYLAND,1
+env = GDK_SCALE,1

hypr/conf/environments/kvm.conf

@@ -2,5 +2,13 @@
 # Environment Variables
 # name: "KVM"
 # ----------------------------------------------------- 
+
+env = XDG_SESSION_TYPE,wayland
+env = XDG_SESSION_DESKTOP,Hyprland
+env = QT_QPA_PLATFORM,wayland
+env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
+env = QT_AUTO_SCREEN_SCALE_FACTOR,1
+env = MOZ_ENABLE_WAYLAND,1
+env = GDK_SCALE,1
 env = WLR_RENDERER_ALLOW_SOFTWARE, 1
 env = WLR_NO_HARDWARE_CURSORS, 1

hypr/conf/keybindings/default.conf

@@ -33,8 +33,8 @@ bind = $mainMod, G, togglegroup # Toggle window group
 bind = $mainMod SHIFT, A, exec, ~/dotfiles/hypr/scripts/toggle-animations.sh # Toggle animations
 bind = $mainMod, PRINT, exec, ~/dotfiles/hypr/scripts/screenshot.sh # Take a screenshot
 bind = $mainMod CTRL, Q, exec, wlogout # Start wlogout
-bind = $mainMod SHIFT, W, exec, waypaper --random # Change the wallpaper
+bind = $mainMod SHIFT, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh # Change the wallpaper
-bind = $mainMod CTRL, W, exec, waypaper # Open wallpaper selector
+bind = $mainMod CTRL, W, exec, ~/dotfiles/hypr/scripts/wallpaper.sh select # Open wallpaper selector
 bind = $mainMod CTRL, RETURN, exec, rofi -show drun -replace -i # Open application launcher
 bind = $mainMod CTRL, H, exec, ~/dotfiles/hypr/scripts/keybindings.sh # Show keybindings
 bind = $mainMod SHIFT, B, exec, ~/dotfiles/waybar/launch.sh # Reload waybar

hypr/conf/layouts/default.conf

@@ -8,8 +8,7 @@ dwindle {
 }
 
 master {
-    # new_is_master = true
+    new_is_master = true
-    # new_status = master
 }
 
 gestures {

hypr/conf/layouts/laptop.conf

@@ -8,8 +8,7 @@ dwindle {
 }
 
 master {
-    # new_is_master = true
+    new_is_master = true
-    # new_status = master
 }
 
 gestures {

hypr/conf/ml4w.conf

@@ -2,22 +2,10 @@
 # ML4W configurations
 # ----------------------------------------------------- 
 
-# Pavucontrol floating
+windowrulev2 = float,class:(.*chat.openai.com.*)
-windowrulev2 = float,class:(.*org.pulseaudio.pavucontrol.*)
+windowrulev2 = size 500 50%,class:(.*chat.openai.com.*)
-windowrulev2 = size 700 600,class:(.*org.pulseaudio.pavucontrol.*)
+windowrulev2 = move 20 70,class:(.*chat.openai.com.*)
-windowrulev2 = center,class:(.*org.pulseaudio.pavucontrol.*)
 
-# OpenAI ChatGPT floating
-windowrulev2 = float,title:(.*chat.openai.com.*)
-windowrulev2 = size 500 50%,title:(.*chat.openai.com.*)
-windowrulev2 = move 20 70,title:(.*chat.openai.com.*)
-
-# ML4W Welcome App floating
-windowrulev2 = float,class:(.*waypaper.*)
-windowrulev2 = size 800 700,class:(.*waypaper.*)
-windowrulev2 = center,class:(.*waypaper.*)
-
-# ML4W Welcome App floating
 windowrulev2 = float,class:(com.ml4w.welcome)
 windowrulev2 = size 700 600,class:(com.ml4w.welcome)
 windowrulev2 = center,class:(com.ml4w.welcome)
@@ -26,7 +14,6 @@ windowrulev2 = float,class:(ml4w-welcome.py)
 windowrulev2 = size 400 500,class:(ml4w-welcome.py)
 windowrulev2 = center,class:(ml4w-welcome.py)
 
-# ML4W Settings App floating
 windowrulev2 = float,class:(com.ml4w.dotfilessettings)
 windowrulev2 = size 700 600,class:(com.ml4w.dotfilessettings)
 windowrulev2 = move 10% 20%,class:(com.ml4w.dotfilessettings)
@@ -35,7 +22,6 @@ windowrulev2 = float,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = size 400 500,class:(ml4w-dotfiles-settings.py)
 windowrulev2 = move 10% 20%,class:(ml4w-dotfiles-settings.py)
 
-# ML4W Hyprland App floating
 windowrulev2 = float,class:(com.ml4w.hyprland.settings)
 windowrulev2 = size 700 600,class:(com.ml4w.hyprland.settings)
 windowrulev2 = center,class:(com.ml4w.hyprland.settings)
@@ -44,31 +30,10 @@ windowrulev2 = float,class:(ml4w-hyprland-settings.py)
 windowrulev2 = size 700 600,class:(ml4w-hyprland-settings.py)
 windowrulev2 = center,class:(ml4w-hyprland-settings.py)
 
-# General floating
 windowrulev2 = float,class:(dotfiles-floating)
 windowrulev2 = size 1000 800,class:(dotfiles-floating)
 windowrulev2 = center,class:(dotfiles-floating)
 
-# XDG Desktop Portal
-env = XDG_CURRENT_DESKTOP,Hyprland
-env = XDG_SESSION_TYPE,wayland
-env = XDG_SESSION_DESKTOP,Hyprland
-
-# QT
-env = QT_QPA_PLATFORM,wayland;xcb
-env = QT_QPA_PLATFORMTHEME,qt6ct
-env = QT_WAYLAND_DISABLE_WINDOWDECORATION,1
-env = QT_AUTO_SCREEN_SCALE_FACTOR,1
-
-# GTK
-env = GDK_SCALE,1
-
-# Mozilla
-env = MOZ_ENABLE_WAYLAND,1
-
-# Set the cursor size for xcursor
-env = XCURSOR_SIZE,24
-
-# Disable appimage launcher by default
 env = APPIMAGELAUNCHER_DISABLE,1
-
+env = XCURSOR_SIZE,24
+env = XDG_CURRENT_DESKTOP,Hyprland

hypr/conf/windows/border-1-reverse.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = rgba(ffffffff)
     col.inactive_border = $color11
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/border-1.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/border-2-reverse.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = rgba(ffffffff)
     col.inactive_border = $color11
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/border-2.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/border-3-reverse.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = rgba(ffffffff)
     col.inactive_border = $color11
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/border-3.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/border-4-reverse.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = rgba(ffffffff)
     col.inactive_border = $color11
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/border-4.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/default.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/no-border-more-gaps.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
-    resize_on_border = true
 }

hypr/conf/windows/no-border.conf

@@ -10,5 +10,4 @@ general {
     col.active_border = $color11
     col.inactive_border = rgba(ffffffff)
     layout = dwindle
-    resize_on_border = true
 }

hypr/hyprlock.conf

@@ -43,7 +43,6 @@ input-field {
 
 label {
     monitor =
-    #clock
     text = cmd[update:1000] echo "$TIME"
     color = rgba(200, 200, 200, 1.0)
     font_size = 55

hypr/hyprpaper.conf

@@ -1,3 +1,3 @@
-preload = $HOME/wallpaper/default.jpg
+preload = $HOME/wallpaper/hyprland.jpg
-wallpaper = ,$HOME/wallpaper/default.jpg
+wallpaper = ,$HOME/wallpaper/hyprland.jpg
 splash = false

hypr/scripts/diagnosis.sh

@@ -46,7 +46,6 @@ _commandExists "swww" "swww"
 _commandExists "eww" "eww"
 _commandExists "magick" "imagemagick"
 _commandExists "figlet" "figlet"
-_commandExists "waypaper" "waypaper"
 
 echo
 echo "Press return to exit"

hypr/scripts/wallpaper-cache.sh

@@ -1,5 +0,0 @@
-#!/bin/bash
-generated_versions="$HOME/.cache/ml4w-wallpaper-generated"
-rm $HOME/.cache/ml4w-wallpaper-generated/*
-echo ":: Wallpaper cache cleared"
-notify-send "Wallpaper cache cleared"

hypr/scripts/wallpaper.sh

@@ -9,135 +9,181 @@
 # by Stephan Raabe (2024) 
 # ----------------------------------------------------- 
 
-# ----------------------------------------------------- 
+# Cache file for holding the current wallpaper
-# Get selected wallpaper
+wallpaper_folder="$HOME/wallpaper"
-# ----------------------------------------------------- 
+if [ -f ~/dotfiles/.settings/wallpaper-folder.sh ] ;then
-echo ":: Using wallpaper $1"
+    source ~/dotfiles/.settings/wallpaper-folder.sh
-wallpaper=$1
-
-# ----------------------------------------------------- 
-# Check to use wallpaper cache
-# ----------------------------------------------------- 
-use_cache=0
-if [ -f $HOME/dotfiles/.settings/wallpaper_cache ] ;then
-    use_cache=1
 fi
-
+used_wallpaper="$HOME/.cache/used_wallpaper"
-if [ "$use_cache" == "1" ] ;then
-    echo ":: Using Wallpaper Cache"
-else
-    echo ":: Wallpaper Cache disabled"
-fi
-
-# ----------------------------------------------------- 
-# File and folder names
-# ----------------------------------------------------- 
-force_generate=0
-generated_versions="$HOME/.cache/ml4w-wallpaper-generated"
 cache_file="$HOME/.cache/current_wallpaper"
-blurred_wallpaper="$HOME/.cache/blurred_wallpaper.png"
+blurred="$HOME/.cache/blurred_wallpaper.png"
-square_wallpaper="$HOME/.cache/square_wallpaper.png"
+square="$HOME/.cache/square_wallpaper.png"
 rasi_file="$HOME/.cache/current_wallpaper.rasi"
 blur_file="$HOME/dotfiles/.settings/blur.sh"
 
 blur="50x30"
 blur=$(cat $blur_file)
 
+# Create cache file if not exists
+if [ ! -f $cache_file ] ;then
+    touch $cache_file
+    echo "$wallpaper_folder/default.jpg" > "$cache_file"
+fi
+
 # Create rasi file if not exists
 if [ ! -f $rasi_file ] ;then
     touch $rasi_file
     echo "* { current-image: url(\"$wallpaper_folder/default.jpg\", height); }" > "$rasi_file"
 fi
 
-# Create folder with generated versions of wallpaper if not exists
+current_wallpaper=$(cat "$cache_file")
-if [ ! -d $generated_versions ] ;then
+
-    mkdir $generated_versions
+case $1 in
-fi
+
+    # Load wallpaper from .cache of last session 
+    "init")
+        sleep 1
+        if [ -f $cache_file ]; then
+            wal -q -i $current_wallpaper
+        else
+            wal -q -i $wallpaper_folder/
+        fi
+    ;;
+
+    # Select wallpaper with rofi
+    "select")
+        sleep 0.2
+        selected=$( find "$wallpaper_folder" -type f \( -iname "*.jpg" -o -iname "*.jpeg" -o -iname "*.png" \) -exec basename {} \; | sort -R | while read rfile
+        do
+            echo -en "$rfile\x00icon\x1f$wallpaper_folder/${rfile}\n"
+        done | rofi -dmenu -i -replace -config ~/dotfiles/rofi/config-wallpaper.rasi)
+        if [ ! "$selected" ]; then
+            echo "No wallpaper selected"
+            exit
+        fi
+        wal -q -i $wallpaper_folder/$selected
+    ;;
+
+    # Randomly select wallpaper 
+    *)
+        wal -q -i $wallpaper_folder/
+    ;;
+
+esac
 
 # ----------------------------------------------------- 
-# Current wallpaper
+# Load current pywal color scheme
 # ----------------------------------------------------- 
-current_wallpaper=$wallpaper
-current_wallpaper_filename=$(basename $current_wallpaper)
-echo ":: Current Wallpaper: $current_wallpaper"
-echo ":: Current Wallpaper Filename: $current_wallpaper_filename"
-newwall=$current_wallpaper_filename
-
-# ----------------------------------------------------- 
-# Execute pywal
-# ----------------------------------------------------- 
-echo ":: Execute wallpaper"
-wal -q -i $wallpaper
 source "$HOME/.cache/wal/colors.sh"
 
 # ----------------------------------------------------- 
-# Wallpaper Effects
+# get wallpaper image name
-# -----------------------------------------------------
+# ----------------------------------------------------- 
+newwall=$(echo $wallpaper | sed "s|$wallpaper_folder/||g")
 
+# ----------------------------------------------------- 
+# Reload waybar with new colors
+# -----------------------------------------------------
+~/dotfiles/waybar/launch.sh
+
+# ----------------------------------------------------- 
+# Set the new wallpaper
+# -----------------------------------------------------
+transition_type="wipe"
+# transition_type="outer"
+# transition_type="random"
+
+cp $wallpaper $HOME/.cache/
+mv $HOME/.cache/$newwall $used_wallpaper
+
+# Load Wallpaper Effect
 if [ -f $HOME/dotfiles/.settings/wallpaper-effect.sh ] ;then
     effect=$(cat $HOME/dotfiles/.settings/wallpaper-effect.sh)
     if [ ! "$effect" == "off" ] ;then
-        used_wallpaper=$generated_versions/$effect-$newwall
+        if [ "$1" == "init" ] ;then
-        if [ -f $generated_versions/$effect-$newwall ] && [ "$force_generate" == "0" ] && [ "$use_cache" == "1" ] ;then
+            echo ":: Init"
-            echo ":: Use cached wallpaper $effect-$newwall"
         else
-            echo ":: Generate new cached wallpaper $effect-$newwall with effect $effect"
+            dunstify "Using wallpaper effect $effect..." "with image $newwall" -h int:value:10 -h string:x-dunst-stack-tag:wallpaper
-            if [ "$1" == "init" ] ;then
-                echo ":: Init"
-            else
-                dunstify "Using wallpaper effect $effect..." "with image $newwall" -h int:value:10 -h string:x-dunst-stack-tag:wallpaper
-            fi
-            source $HOME/dotfiles/hypr/effects/wallpaper/$effect
         fi
-        echo ":: Loading wallpaper $generated_versions/$effect-$newwall with effect $effect"
+        source $HOME/dotfiles/hypr/effects/wallpaper/$effect
-        killall -e hyprpaper & 
-        sleep 1; 
-        wal_tpl=$(cat $HOME/dotfiles/.settings/hyprpaper.tpl)
-        echo $wal_tpl
-        output=${wal_tpl//WALLPAPER/$used_wallpaper}
-        echo "$output" > $HOME/dotfiles/hypr/hyprpaper.conf
-        hyprpaper & > /dev/null 2>&1
-    else
-        echo ":: Wallpaper effect is set to off"
     fi
 fi
 
+wallpaper_engine=$(cat $HOME/dotfiles/.settings/wallpaper-engine.sh)
+if [ "$wallpaper_engine" == "swww" ] ;then
+    # swww
+    echo ":: Using swww"
+    swww img $used_wallpaper \
+        --transition-bezier .43,1.19,1,.4 \
+        --transition-fps=60 \
+        --transition-type=$transition_type \
+        --transition-duration=0.7 \
+        --transition-pos "$( hyprctl cursorpos )"
+elif [ "$wallpaper_engine" == "hyprpaper" ] ;then
+    # hyprpaper
+    echo ":: Using hyprpaper"
+    killall hyprpaper
+    wal_tpl=$(cat $HOME/dotfiles/.settings/hyprpaper.tpl)
+    output=${wal_tpl//WALLPAPER/$used_wallpaper}
+    echo "$output" > $HOME/dotfiles/hypr/hyprpaper.conf
+    hyprpaper &
+else
+    echo ":: Wallpaper Engine disabled"
+fi
+
+if [ "$1" == "init" ] ;then
+    echo ":: Init"
+else
+    sleep 1
+    dunstify "Changing wallpaper ..." "with image $newwall" -h int:value:25 -h string:x-dunst-stack-tag:wallpaper
+    
+    # ----------------------------------------------------- 
+    # Reload Hyprctl.sh
+    # -----------------------------------------------------
+    $HOME/.config/ml4w-hyprland-settings/hyprctl.sh &
+fi
+
 # ----------------------------------------------------- 
 # Created blurred wallpaper
 # -----------------------------------------------------
-if [ -f $generated_versions/blur-$blur-$newwall.png ] && [ "$force_generate" == "0" ] && [ "$use_cache" == "1" ] ;then
+if [ "$1" == "init" ] ;then
-    echo ":: Use cached wallpaper blur-$blur-$newwall.png"
+    echo ":: Init"
 else
-    echo ":: Generate new cached wallpaper blur-$blur-$newwall with blur $blur"
+    dunstify "Creating blurred version ..." "with image $newwall" -h int:value:50 -h string:x-dunst-stack-tag:wallpaper
-    if [ "$1" == "init" ] ;then
+fi
-        echo ":: Init"
+
-    else
+magick $used_wallpaper -resize 75% $blurred
-        dunstify "Creating blurred version ..." "with image $newwall" -h int:value:50 -h string:x-dunst-stack-tag:wallpaper
+echo ":: Resized to 75%"
-    fi    
+if [ ! "$blur" == "0x0" ] ;then
-    magick $wallpaper -resize 75% $blurred_wallpaper
+    magick $blurred -blur $blur $blurred
-    echo ":: Resized to 75%"
+    echo ":: Blurred"
-    if [ ! "$blur" == "0x0" ] ;then
-        magick $blurred_wallpaper -blur $blur $blurred_wallpaper
-        cp $blurred_wallpaper $generated_versions/blur-$blur-$newwall.png
-        echo ":: Blurred"
-    fi
-    cp $generated_versions/blur-$blur-$newwall.png $blurred_wallpaper
 fi
-cp $generated_versions/blur-$blur-$newwall.png $blurred_wallpaper
 
 # ----------------------------------------------------- 
-# Created square wallpaper
+# Created quare wallpaper
 # -----------------------------------------------------
-if [ -f $generated_versions/square-$newwall.png ] && [ "$force_generate" == "0" ] && [ "$use_cache" == "1" ] ;then
+if [ "$1" == "init" ] ;then
-    echo ":: Use cached wallpaper square-$newwall.png"
+    echo ":: Init"
 else
-    echo ":: Generate new cached wallpaper square-$newwall"
+    dunstify "Creating square version ..." "with image $newwall" -h int:value:75 -h string:x-dunst-stack-tag:wallpaper
-    if [ "$1" == "init" ] ;then
-        echo ":: Init"
-    else
-        dunstify "Creating square version ..." "with image $newwall" -h int:value:75 -h string:x-dunst-stack-tag:wallpaper
-    fi
-    magick $wallpaper -gravity Center -extent 1:1 $square_wallpaper
-    cp $square_wallpaper $generated_versions/square-$newwall.png
 fi
-cp $generated_versions/square-$newwall.png $square_wallpaper
+magick $wallpaper -gravity Center -extent 1:1 $square
+echo ":: Square version created"
+
+# ----------------------------------------------------- 
+# Write selected wallpaper into .cache files
+# ----------------------------------------------------- 
+echo "$wallpaper" > "$cache_file"
+echo "* { current-image: url(\"$blurred\", height); }" > "$rasi_file"
+
+# ----------------------------------------------------- 
+# Send notification
+# ----------------------------------------------------- 
+
+if [ "$1" == "init" ] ;then
+    echo ":: Init"
+else
+    dunstify "Wallpaper procedure complete!" "with image $newwall" -h int:value:100 -h string:x-dunst-stack-tag:wallpaper
+fi
+
+echo "DONE!"

hypr/scripts/xdg.sh

@@ -15,7 +15,7 @@ killall -e xdg-desktop-portal-kde
 killall -e xdg-desktop-portal-lxqt
 killall -e xdg-desktop-portal-wlr
 killall -e xdg-desktop-portal-gtk
-killall -e xdg-desktop-portal
+killall xdg-desktop-portal
 sleep 1
 
 # start xdg-desktop-portal-hyprland

install.sh

@@ -34,7 +34,7 @@ else
 fi
 echo ""
 source .install/required.sh
-source .install/confirm_start.sh
+source .install/confirm-start.sh
 source .install/paralleldownloads.sh
 source .install/yay.sh
 source .install/updatesystem.sh
@@ -44,46 +44,39 @@ source .install/installer.sh
 source .install/remove.sh
 source .install/general.sh
 source .install/packages/general-packages.sh
-source .install/install_packages.sh
+source .install/install-packages.sh
 source .install/profile.sh
 if [[ $profile == *"Hyprland"* ]]; then
     echo -e "${GREEN}"
     figlet "Hyprland"
     echo -e "${NONE}"
     source .install/packages/hyprland-packages.sh
-    source .install/install_packages.sh
+    source .install/install-packages.sh
 fi
 if [[ $profile == *"Qtile"* ]]; then
     echo -e "${GREEN}"
     figlet "Qtile"
     echo -e "${NONE}"
     source .install/packages/qtile-packages.sh
-    source .install/install_packages.sh
+    source .install/install-packages.sh
 fi
 source .install/wallpaper.sh
 source .install/displaymanager.sh
 source .install/issue.sh
-
-# Modify existing files before restore starts
-source .install/before_restore.sh
-
-# Restore configuration and settings
 source .install/restore.sh
-
-# Setup the input devices
 source .install/keyboard.sh
-
 source .install/neovim.sh
 source .install/hook.sh
 source .install/vm.sh
 source .install/copy.sh
 source .install/init-pywal.sh
 if [[ $profile == *"Hyprland"* ]]; then
-    source .install/hyprland_dotfiles.sh
+    source .install/hyprland-dotfiles.sh
 fi
 if [[ $profile == *"Qtile"* ]]; then
-    source .install/qtile_dotfiles.sh
+    source .install/qtile-dotfiles.sh
 fi
+source .install/zshfish.sh
 source .install/settings.sh
 source .install/apps.sh
 source .install/gtk.sh

waybar/launch.sh

@@ -25,7 +25,7 @@ sleep 0.2
 # ----------------------------------------------------- 
 # Default theme: /THEMEFOLDER;/VARIATION
 # ----------------------------------------------------- 
-themestyle="/ml4w-blur;/ml4w-blur/white"
+themestyle="/ml4w;/ml4w/light"
 
 # ----------------------------------------------------- 
 # Get current theme information from .cache/.themestyle.sh
@@ -38,7 +38,7 @@ else
 fi
 
 IFS=';' read -ra arrThemes <<< "$themestyle"
-echo ":: Theme: ${arrThemes[0]}"
+echo "Theme: ${arrThemes[0]}"
 
 if [ ! -f ~/dotfiles/waybar/themes${arrThemes[1]}/style.css ]; then
     themestyle="/ml4w;/ml4w/light"

waybar/modules.json

@@ -110,7 +110,7 @@
     // Wallpaper
     "custom/wallpaper": {
         "format": "",
-        "on-click": "waypaper",
+        "on-click": "~/dotfiles/hypr/scripts/wallpaper.sh select",
         "on-click-right": "~/dotfiles/hypr/scripts/wallpaper-effects.sh",
         "tooltip-format": "Left: Select a wallpaper\nRight: Select wallpaper effect"
     },
@@ -136,6 +136,20 @@
         "tooltip": false
     },
 
+    // Filemanager Launcher
+    "custom/filemanager": {
+        "format": "",
+        "on-click": "~/dotfiles/.settings/filemanager.sh",
+        "tooltip-format": "Open filemanager"
+    },
+
+    // Browser Launcher
+    "custom/browser": {
+        "format": "",
+        "on-click": "~/dotfiles/.settings/browser.sh",
+        "tooltip-format": "Open browser"
+    },    
+
     // ChatGPT Launcher
     "custom/chatgpt": {
         "format": " ",
@@ -301,6 +315,15 @@
         ]
     },
 
+    // Group Quicklinks
+    "group/quicklinks": {
+        "orientation": "horizontal",
+        "modules": [
+            "custom/browser",
+            "custom/filemanager",
+         ]
+    },
+
     // Network
     "network": {
         "format": "{ifname}",

waybar/themes/assets/ml4w-icon-black.svg

@@ -1,18 +0,0 @@
-<svg version="1.1" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 256 256" role="img">
-  <!-- Define the mask for the cutouts -->
-  <mask id="cutoutMask">
-    <!-- Circle -->
-    <circle fill="white" cx="120" cy="120" r="120" />
-    
-    <!-- Big L Shape -->
-    <rect x="60" y="165" width="120" height="15" rx="4" ry="4" fill="black"/>
-    <rect x="60" y="60" width="15" height="120" rx="4" ry="4" fill="black"/>
-    
-    <!-- Little L Shape -->
-    <rect x="110" y="120" width="75" height="15" rx="4" ry="4" fill="black"/>
-    <rect x="110" y="55" width="15" height="80" rx="4" ry="4" fill="black"/>
-  </mask>
-
-  <!-- Circle with cutouts -->
-  <circle fill="black" cx="120" cy="120" r="120" mask="url(#cutoutMask)" />
-</svg>

waybar/themes/assets/ml4w-icon-white.svg

@@ -1,18 +0,0 @@
-<svg version="1.1" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 256 256" role="img">
-  <!-- Define the mask for the cutouts -->
-  <mask id="cutoutMask">
-    <!-- Circle -->
-    <circle fill="white" cx="120" cy="120" r="120" />
-    
-    <!-- Big L Shape -->
-    <rect x="60" y="165" width="120" height="15" rx="4" ry="4" fill="black"/>
-    <rect x="60" y="60" width="15" height="120" rx="4" ry="4" fill="black"/>
-    
-    <!-- Little L Shape -->
-    <rect x="110" y="120" width="75" height="15" rx="4" ry="4" fill="black"/>
-    <rect x="110" y="55" width="15" height="80" rx="4" ry="4" fill="black"/>
-  </mask>
-
-  <!-- Circle with cutouts -->
-  <circle fill="white" cx="120" cy="120" r="120" mask="url(#cutoutMask)" />
-</svg>

waybar/themes/assets/ml4w-icon.svg

@@ -1,18 +0,0 @@
-<svg version="1.1" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 256 256" role="img">
-  <!-- Define the mask for the cutouts -->
-  <mask id="cutoutMask">
-    <!-- Circle -->
-    <circle fill="#19cddb" cx="120" cy="120" r="120" />
-    
-    <!-- Big L Shape -->
-    <rect x="60" y="165" width="120" height="15" rx="4" ry="4" fill="black"/>
-    <rect x="60" y="60" width="15" height="120" rx="4" ry="4" fill="black"/>
-    
-    <!-- Little L Shape -->
-    <rect x="110" y="120" width="75" height="15" rx="4" ry="4" fill="black"/>
-    <rect x="110" y="55" width="15" height="80" rx="4" ry="4" fill="black"/>
-  </mask>
-
-  <!-- Circle with cutouts -->
-  <circle fill="#19cddb" cx="120" cy="120" r="120" mask="url(#cutoutMask)" />
-</svg>

waybar/themes/assets/openai-black.svg

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?><!-- Uploaded to: SVG Repo, www.svgrepo.com, Generator: SVG Repo Mixer Tools -->
-<svg fill="#000000" width="800px" height="800px" viewBox="0 0 24 24" role="img" xmlns="http://www.w3.org/2000/svg"><title>OpenAI icon</title><path d="M22.2819 9.8211a5.9847 5.9847 0 0 0-.5157-4.9108 6.0462 6.0462 0 0 0-6.5098-2.9A6.0651 6.0651 0 0 0 4.9807 4.1818a5.9847 5.9847 0 0 0-3.9977 2.9 6.0462 6.0462 0 0 0 .7427 7.0966 5.98 5.98 0 0 0 .511 4.9107 6.051 6.051 0 0 0 6.5146 2.9001A5.9847 5.9847 0 0 0 13.2599 24a6.0557 6.0557 0 0 0 5.7718-4.2058 5.9894 5.9894 0 0 0 3.9977-2.9001 6.0557 6.0557 0 0 0-.7475-7.0729zm-9.022 12.6081a4.4755 4.4755 0 0 1-2.8764-1.0408l.1419-.0804 4.7783-2.7582a.7948.7948 0 0 0 .3927-.6813v-6.7369l2.02 1.1686a.071.071 0 0 1 .038.052v5.5826a4.504 4.504 0 0 1-4.4945 4.4944zm-9.6607-4.1254a4.4708 4.4708 0 0 1-.5346-3.0137l.142.0852 4.783 2.7582a.7712.7712 0 0 0 .7806 0l5.8428-3.3685v2.3324a.0804.0804 0 0 1-.0332.0615L9.74 19.9502a4.4992 4.4992 0 0 1-6.1408-1.6464zM2.3408 7.8956a4.485 4.485 0 0 1 2.3655-1.9728V11.6a.7664.7664 0 0 0 .3879.6765l5.8144 3.3543-2.0201 1.1685a.0757.0757 0 0 1-.071 0l-4.8303-2.7865A4.504 4.504 0 0 1 2.3408 7.872zm16.5963 3.8558L13.1038 8.364 15.1192 7.2a.0757.0757 0 0 1 .071 0l4.8303 2.7913a4.4944 4.4944 0 0 1-.6765 8.1042v-5.6772a.79.79 0 0 0-.407-.667zm2.0107-3.0231l-.142-.0852-4.7735-2.7818a.7759.7759 0 0 0-.7854 0L9.409 9.2297V6.8974a.0662.0662 0 0 1 .0284-.0615l4.8303-2.7866a4.4992 4.4992 0 0 1 6.6802 4.66zM8.3065 12.863l-2.02-1.1638a.0804.0804 0 0 1-.038-.0567V6.0742a4.4992 4.4992 0 0 1 7.3757-3.4537l-.142.0805L8.704 5.459a.7948.7948 0 0 0-.3927.6813zm1.0976-2.3654l2.602-1.4998 2.6069 1.4998v2.9994l-2.5974 1.4997-2.6067-1.4997Z"/></svg>

waybar/themes/assets/openai-white.svg

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?><!-- Uploaded to: SVG Repo, www.svgrepo.com, Generator: SVG Repo Mixer Tools -->
-<svg fill="#ffffff" width="800px" height="800px" viewBox="0 0 24 24" role="img" xmlns="http://www.w3.org/2000/svg"><title>OpenAI icon</title><path d="M22.2819 9.8211a5.9847 5.9847 0 0 0-.5157-4.9108 6.0462 6.0462 0 0 0-6.5098-2.9A6.0651 6.0651 0 0 0 4.9807 4.1818a5.9847 5.9847 0 0 0-3.9977 2.9 6.0462 6.0462 0 0 0 .7427 7.0966 5.98 5.98 0 0 0 .511 4.9107 6.051 6.051 0 0 0 6.5146 2.9001A5.9847 5.9847 0 0 0 13.2599 24a6.0557 6.0557 0 0 0 5.7718-4.2058 5.9894 5.9894 0 0 0 3.9977-2.9001 6.0557 6.0557 0 0 0-.7475-7.0729zm-9.022 12.6081a4.4755 4.4755 0 0 1-2.8764-1.0408l.1419-.0804 4.7783-2.7582a.7948.7948 0 0 0 .3927-.6813v-6.7369l2.02 1.1686a.071.071 0 0 1 .038.052v5.5826a4.504 4.504 0 0 1-4.4945 4.4944zm-9.6607-4.1254a4.4708 4.4708 0 0 1-.5346-3.0137l.142.0852 4.783 2.7582a.7712.7712 0 0 0 .7806 0l5.8428-3.3685v2.3324a.0804.0804 0 0 1-.0332.0615L9.74 19.9502a4.4992 4.4992 0 0 1-6.1408-1.6464zM2.3408 7.8956a4.485 4.485 0 0 1 2.3655-1.9728V11.6a.7664.7664 0 0 0 .3879.6765l5.8144 3.3543-2.0201 1.1685a.0757.0757 0 0 1-.071 0l-4.8303-2.7865A4.504 4.504 0 0 1 2.3408 7.872zm16.5963 3.8558L13.1038 8.364 15.1192 7.2a.0757.0757 0 0 1 .071 0l4.8303 2.7913a4.4944 4.4944 0 0 1-.6765 8.1042v-5.6772a.79.79 0 0 0-.407-.667zm2.0107-3.0231l-.142-.0852-4.7735-2.7818a.7759.7759 0 0 0-.7854 0L9.409 9.2297V6.8974a.0662.0662 0 0 1 .0284-.0615l4.8303-2.7866a4.4992 4.4992 0 0 1 6.6802 4.66zM8.3065 12.863l-2.02-1.1638a.0804.0804 0 0 1-.038-.0567V6.0742a4.4992 4.4992 0 0 1 7.3757-3.4537l-.142.0805L8.704 5.459a.7948.7948 0 0 0-.3927.6813zm1.0976-2.3654l2.602-1.4998 2.6069 1.4998v2.9994l-2.5974 1.4997-2.6067-1.4997Z"/></svg>

waybar/themes/assets/openai.svg

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?><!-- Uploaded to: SVG Repo, www.svgrepo.com, Generator: SVG Repo Mixer Tools -->
-<svg fill="#ffffff" width="800px" height="800px" viewBox="0 0 24 24" role="img" xmlns="http://www.w3.org/2000/svg"><title>OpenAI icon</title><path d="M22.2819 9.8211a5.9847 5.9847 0 0 0-.5157-4.9108 6.0462 6.0462 0 0 0-6.5098-2.9A6.0651 6.0651 0 0 0 4.9807 4.1818a5.9847 5.9847 0 0 0-3.9977 2.9 6.0462 6.0462 0 0 0 .7427 7.0966 5.98 5.98 0 0 0 .511 4.9107 6.051 6.051 0 0 0 6.5146 2.9001A5.9847 5.9847 0 0 0 13.2599 24a6.0557 6.0557 0 0 0 5.7718-4.2058 5.9894 5.9894 0 0 0 3.9977-2.9001 6.0557 6.0557 0 0 0-.7475-7.0729zm-9.022 12.6081a4.4755 4.4755 0 0 1-2.8764-1.0408l.1419-.0804 4.7783-2.7582a.7948.7948 0 0 0 .3927-.6813v-6.7369l2.02 1.1686a.071.071 0 0 1 .038.052v5.5826a4.504 4.504 0 0 1-4.4945 4.4944zm-9.6607-4.1254a4.4708 4.4708 0 0 1-.5346-3.0137l.142.0852 4.783 2.7582a.7712.7712 0 0 0 .7806 0l5.8428-3.3685v2.3324a.0804.0804 0 0 1-.0332.0615L9.74 19.9502a4.4992 4.4992 0 0 1-6.1408-1.6464zM2.3408 7.8956a4.485 4.485 0 0 1 2.3655-1.9728V11.6a.7664.7664 0 0 0 .3879.6765l5.8144 3.3543-2.0201 1.1685a.0757.0757 0 0 1-.071 0l-4.8303-2.7865A4.504 4.504 0 0 1 2.3408 7.872zm16.5963 3.8558L13.1038 8.364 15.1192 7.2a.0757.0757 0 0 1 .071 0l4.8303 2.7913a4.4944 4.4944 0 0 1-.6765 8.1042v-5.6772a.79.79 0 0 0-.407-.667zm2.0107-3.0231l-.142-.0852-4.7735-2.7818a.7759.7759 0 0 0-.7854 0L9.409 9.2297V6.8974a.0662.0662 0 0 1 .0284-.0615l4.8303-2.7866a4.4992 4.4992 0 0 1 6.6802 4.66zM8.3065 12.863l-2.02-1.1638a.0804.0804 0 0 1-.038-.0567V6.0742a4.4992 4.4992 0 0 1 7.3757-3.4537l-.142.0805L8.704 5.459a.7948.7948 0 0 0-.3927.6813zm1.0976-2.3654l2.602-1.4998 2.6069 1.4998v2.9994l-2.5974 1.4997-2.6067-1.4997Z"/></svg>

waybar/themes/ml4w-blur-bottom/black/style.css

@@ -20,10 +20,5 @@ window#waybar {
 }
 
 #custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-black.svg");
+    background-image: url("../../assets/ml4w-icon-dark.png");
 }
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-black.svg");
-}
-

waybar/themes/ml4w-blur-bottom/config

@@ -19,10 +19,7 @@
     "spacing": 0,
 
     // Load Modules
-    "include": [
+    "include": ["~/dotfiles/waybar/modules.json"],
-        "~/dotfiles/.settings/waybar-quicklinks.json",
-        "~/dotfiles/waybar/modules.json"
-    ],
 
     // Modules Left
     "modules-left": [

waybar/themes/ml4w-blur-bottom/white/style.css

@@ -18,11 +18,3 @@
 window#waybar {
     background-color: rgba(255,255,255,0.1);
 }
-
-#custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-white.svg");
-}
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-white.svg");
-}

waybar/themes/ml4w-blur/black/style.css

@@ -20,9 +20,5 @@ window#waybar {
 }
 
 #custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-black.svg");
+    background-image: url("../../assets/ml4w-icon-dark.png");
-}
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-black.svg");
 }

waybar/themes/ml4w-blur/config

@@ -19,10 +19,7 @@
     "spacing": 0,
 
     // Load Modules
-    "include": [
+    "include": ["~/dotfiles/waybar/modules.json"],
-        "~/dotfiles/.settings/waybar-quicklinks.json",
-        "~/dotfiles/waybar/modules.json"
-    ],
 
     // Modules Left
     "modules-left": [

waybar/themes/ml4w-blur/style.css

@@ -165,16 +165,6 @@ window#waybar.empty #window {
 #custom-system,
 #custom-hyprshade,
 #custom-hypridle,
-#custom-quicklink1,
-#custom-quicklink2,
-#custom-quicklink3,
-#custom-quicklink4,
-#custom-quicklink5,
-#custom-quicklink6,
-#custom-quicklink7,
-#custom-quicklink8,
-#custom-quicklink9,
-#custom-quicklink10,
 #custom-waybarthemes {
     margin-right: 23px;
     font-size: 20px;
@@ -213,11 +203,10 @@ window#waybar.empty #window {
 
 #custom-ml4w-welcome {
     margin-right: 12px;
-    background-image: url("../assets/ml4w-icon.svg");
+    background-image: url("../assets/ml4w-icon.png");
-    background-position: center;
     background-repeat: no-repeat;
-    background-size: contain; 
+    background-position: center;
-    padding-right: 20px;
+    padding-right: 24px;
 }
 
 #custom-ml4w-hyprland-settings {
@@ -230,11 +219,10 @@ window#waybar.empty #window {
 
 #custom-chatgpt {
     margin-right: 12px;
-    background-image: url("../assets/openai.svg");
+    background-image: url("../assets/ai-icon-20.png");
     background-repeat: no-repeat;
     background-position: center;
-    background-size: contain; 
+    padding-right: 24px;
-    padding-right: 16px;
 }
 
 /* -----------------------------------------------------

waybar/themes/ml4w-blur/white/style.css

@@ -18,11 +18,3 @@
 window#waybar {
     background-color: rgba(255,255,255,0.1);
 }
-
-#custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-white.svg");
-}
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-white.svg");
-}

waybar/themes/ml4w-bottom/black/style.css

@@ -16,9 +16,5 @@
 @import '../../ml4w/style.css';
 
 #custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-black.svg");
+    background-image: url("../../assets/ml4w-icon-dark.png");
-}
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-black.svg");
 }

waybar/themes/ml4w-bottom/config

@@ -19,10 +19,7 @@
     "spacing": 0,
 
     // Load Modules
-    "include": [
+    "include": ["~/dotfiles/waybar/modules.json"],
-        "~/dotfiles/.settings/waybar-quicklinks.json",
-        "~/dotfiles/waybar/modules.json"
-    ],
 
     // Modules Left
     "modules-left": [

waybar/themes/ml4w-bottom/white/style.css

@@ -14,11 +14,3 @@
 @define-color iconcolor #FFFFFF;
 
 @import '../../ml4w/style.css';
-
-#custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-white.svg");
-}
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-white.svg");
-}

waybar/themes/ml4w-minimal/config

@@ -18,10 +18,7 @@
     "spacing": 0,
 
     // Load Modules
-    "include": [
+    "include": ["~/dotfiles/waybar/modules.json"],
-        "~/dotfiles/.settings/waybar-quicklinks.json",
-        "~/dotfiles/waybar/modules.json"
-    ],
 
     // Modules Left
     "modules-left": [

waybar/themes/ml4w-minimal/style.css

@@ -136,16 +136,6 @@ window#waybar.empty #window {
 #custom-system,
 #custom-hyprshade,
 #custom-hypridle,
-#custom-quicklink1,
-#custom-quicklink2,
-#custom-quicklink3,
-#custom-quicklink4,
-#custom-quicklink5,
-#custom-quicklink6,
-#custom-quicklink7,
-#custom-quicklink8,
-#custom-quicklink9,
-#custom-quicklink10,
 #custom-waybarthemes {
     margin-right: 23px;
     font-size: 14px;
@@ -195,12 +185,11 @@ window#waybar.empty #window {
 
 
 #custom-ml4w-welcome {
-    margin-right: 12px;
+    margin-right: 15px;
-    background-image: url("../assets/ml4w-icon.svg");
+    background-image: url("../assets/ml4w-icon-20.png");
-    background-position: center;
     background-repeat: no-repeat;
-    background-size: contain; 
+    background-position: center;
-    padding-right: 20px;
+    padding-right: 24px;
 }
 
 #custom-ml4w-hyprland-settings {

waybar/themes/ml4w/black/style.css

@@ -15,10 +15,6 @@
  
  @import '../style.css';
  
-#custom-ml4w-welcome {
+ #custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-black.svg");
+    background-image: url("../../assets/ml4w-icon-dark.png");
-}
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-black.svg");
 }

waybar/themes/ml4w/config

@@ -19,10 +19,7 @@
     "spacing": 0,
 
     // Load Modules
-    "include": [
+    "include": ["~/dotfiles/waybar/modules.json"],
-        "~/dotfiles/.settings/waybar-quicklinks.json",
-        "~/dotfiles/waybar/modules.json"
-    ],
 
     // Modules Left
     "modules-left": [

waybar/themes/ml4w/style.css

@@ -166,16 +166,6 @@ window#waybar.empty #window {
 #custom-system,
 #custom-hyprshade,
 #custom-hypridle,
-#custom-quicklink1,
-#custom-quicklink2,
-#custom-quicklink3,
-#custom-quicklink4,
-#custom-quicklink5,
-#custom-quicklink6,
-#custom-quicklink7,
-#custom-quicklink8,
-#custom-quicklink9,
-#custom-quicklink10,
 #custom-waybarthemes {
     margin-right: 23px;
     font-size: 20px;
@@ -214,20 +204,18 @@ window#waybar.empty #window {
 
 #custom-chatgpt {
     margin-right: 12px;
-    background-image: url("../assets/openai.svg");
+    background-image: url("../assets/ai-icon.png");
     background-repeat: no-repeat;
     background-position: center;
-    background-size: contain; 
+    padding-right: 24px;
-    padding-right: 16px;
 }
 
 #custom-ml4w-welcome {
     margin-right: 12px;
-    background-image: url("../assets/ml4w-icon.svg");
+    background-image: url("../assets/ml4w-icon.png");
-    background-position: center;
     background-repeat: no-repeat;
-    background-size: contain; 
+    background-position: center;
-    padding-right: 20px;
+    padding-right: 24px;
 }
 
 #custom-ml4w-hyprland-settings {

waybar/themes/ml4w/white/style.css

@@ -1,24 +1,17 @@
 /* -----------------------------------------------------
  * Import Pywal colors 
  * ----------------------------------------------------- */
-@import '../../../../../.cache/wal/colors-waybar.css';
+ @import '../../../../../.cache/wal/colors-waybar.css';
 
-@define-color backgroundlight #FFFFFF;
+ @define-color backgroundlight #FFFFFF;
-@define-color backgrounddark #FFFFFF;
+ @define-color backgrounddark #FFFFFF;
-@define-color workspacesbackground1 #FFFFFF;
+ @define-color workspacesbackground1 #FFFFFF;
-@define-color workspacesbackground2 #CCCCCC;
+ @define-color workspacesbackground2 #CCCCCC;
-@define-color bordercolor #FFFFFF;
+ @define-color bordercolor #FFFFFF;
-@define-color textcolor1 #000000;
+ @define-color textcolor1 #000000;
-@define-color textcolor2 #000000;
+ @define-color textcolor2 #000000;
-@define-color textcolor3 #000000;
+ @define-color textcolor3 #000000;
-@define-color iconcolor #FFFFFF;
+ @define-color iconcolor #FFFFFF;
  
-@import '../style.css';
+ @import '../style.css';
- 
+ 
-#custom-ml4w-welcome {
-    background-image: url("../../assets/ml4w-icon-white.svg");
-}
-
-#custom-chatgpt {
-    background-image: url("../../assets/openai-white.svg");
-}

waybar/themes/starter/config

@@ -26,10 +26,7 @@
     "spacing": 0,
 
     // Load Modules
-    "include": [
+    "include": ["~/dotfiles/waybar/themes/starter/modules.json"],
-        "~/dotfiles/.settings/waybar-quicklinks.json",
-        "~/dotfiles/waybar/themes/starter/modules.json"
-    ],
 
     // Modules Left
     "modules-left": [

waybar/themes/starter/style.css

@@ -166,16 +166,6 @@ window#waybar.empty #window {
 #custom-system,
 #custom-hyprshade,
 #custom-hypridle,
-#custom-quicklink1,
-#custom-quicklink2,
-#custom-quicklink3,
-#custom-quicklink4,
-#custom-quicklink5,
-#custom-quicklink6,
-#custom-quicklink7,
-#custom-quicklink8,
-#custom-quicklink9,
-#custom-quicklink10,
 #custom-waybarthemes {
     margin-right: 23px;
     font-size: 20px;
@@ -204,11 +194,10 @@ window#waybar.empty #window {
 }
 
 #custom-ml4w-welcome {
-    margin-right: 12px;
+    margin-right: 15px;
-    background-image: url("../assets/ml4w-icon.svg");
+    background-image: url("../assets/ml4w-icon.png");
-    background-position: center;
     background-repeat: no-repeat;
-    background-size: contain; 
+    background-position: center;
     padding-right: 24px;
 }
 

waypaper/config.ini

@@ -1,19 +0,0 @@
-[Settings]
-language = en
-folder = ~/wallpaper
-wallpaper = ~/wallpaper/default.jpg
-backend = hyprpaper
-monitors = All
-fill = fill
-sort = name
-color = #ffffff
-subfolders = False
-show_hidden = False
-show_gifs_only = False
-post_command = ~/dotfiles/hypr/scripts/wallpaper.sh $wallpaper
-number_of_columns = 3
-swww_transition_type = any
-swww_transition_step = 90
-swww_transition_angle = 0
-swww_transition_duration = 2
-